• 한국건설순환자원학회논문집
• /
• 제2권1호
• /
• pp.120-127
• /
• 2006

폐목질원료로서, 제재, 합판, PB, MDF와 폐침목 등의 해머밀에 의한 파쇄특성과 재생파티클 종류와 혼합비율에 따른 재생보드의 물성을 구명함으로써, 보드원료로서 재자원화 하는 방안을 모색해 보고자 하였다. 그 결과, 재생보드의 휨성질은 목질원료의 입자형태 및 입도분포에 크게 영향을 받으며, 파티클, 섬유와 같은 element가 압축고화된 상태의 판넬(PB, MDF)로부터 재생한 파티클은 물성저하를 초래하였다. 그러나, 재생파티클에 이미 도포 경화된 수지에 의해 재생보드의 치수안정성이 향상되는 효과가 있다. 따라서, 보드원료로서의 적합한 요건은 건전폐목재(제재, 합판)와 저급폐목재(PB, MDF)의 적정한 혼용에 있다고 할 수 있다. 본 연구에서는 건전폐목재 재생파티클과 재생 PB파티클의 혼용시험에서 제재파티클이 휨성질(MOR, MOE)과 박리강도에 기여하고, 합판파티클은 치수안정성에 더욱 기여하는 경향을 나타냈다. 또한 보드의 중층용 원료로 재생PB파티클의 혼합비율을 증가함에 따라서 보드의 휨성능이 감소되는 경향을 나타냈지만 혼합률 40%까지는 유의차가 없이 보드 15형(MOR : $153kgf/cm^2$, MOE : $27.5tonf/cm^2$) 수준의 성능이 구비되었다. 향후 생활폐목재(폐가구 등)와 같은 저급폐목재의 활용방안이 강구된다면 보드원료의 수급에 한층 기여할 수 있을 것이다.

• KSBB Journal
• /
• 제11권4호
• /
• pp.405-410
• /
• 1996

내부 순환 장치를 대규모화함에 따른 혼합특성의 변화를 추적자의 분산실험을 통하여 고찰하였다. 분산특성을 나타내는 무차원수 Bodenstein 수를 5L, 5 50L, 500L 규모의 세 장치에서 공탑기체속도, 액체 순환속도, 포기관의 높이에 대한 직경비의 변화, 빛 반응관의 직경에 대한 포기관의 직경비의 영향에 따 나타내었다. 5L 규모의 장치에서 Bo 수는 공탑 기체속도의 증가에 따라 증가하다 가스 해리 현상의 발생으로 증가폭이 둔해지는 경향을 나타내었으며, 5 50L와 500L 장치에서는 공탑기체속도의 증가에 따라 Eo 수가 감소하였는데, 이는 역혼합의 영향이 크게 나타난 것으로 판단되었다. 또한, 500L 규모 장 치에서 Eo 수의 변화는 50L 장치에서 보다 낮은 공 탑기체속도하에서 변화하는 것으로 보아 대규모화에 따라 흔합이 더욱 빨리 발생함을 알 수 있었다. 차원 해석을 통하여 각 변수틀간의 상관관계를 구하였고, 회귀분석을 통하여 다음과 같은 결과식을 구하였다.

• 대한한방내과학회지
• /
• 제20권1호
• /
• pp.198-209
• /
• 1999

A thrombus is a mass formed from the constituents of the blood within the vessels or the heart during life. The process of its formation is known as thrombosis, It has been generally accepted that Holotrichia is an useful medicine for thrombosis. The rate of fibrinolysis of Holotrichia extracts increase as incubation times. Especially 52 days, the effect on the extracts has an maximum increased fibrinolytic activity, Heat-and-pH-stability of the extract on fibrinolysis is relative to temperature, At $37^{\circ}C$, it has activating effect between pH 4 and pH 12. At higher temperature, especially $80^{\circ}C$, an excessive increase in temperature has a deactivating effect on the extracts. Optimal pH of the extract on fibrinolysis is between pH 7.0 and pH 8.5, it is effective within a relatively broad pH range. In experiments of various inhibitors of Holotrichia extracts fibrinolytic activity, there are strong inhibitive effect on SBTI and Aprotinin, and a few inhibitive effect on DFP and t-AMCHA, no effect on PSMB and TLCK. Holotrichia extracts mixing with fibrinogen are observed Electron microscopy. it shows partially erosive-shaped fibrinolytic activity. In a SDS-PAGE of the extract having the fibrinolytic activity, three bands are found, protein 1, 2 and 3 having a molecular weight of 30,000, 45,000 and 60,000 Dalton.

• 대한기계학회논문집B
• /
• 제32권2호
• /
• pp.107-116
• /
• 2008

The jet pumps are widely used to transfer the fuel between the tanks in an aircraft fuel supply system. However detailed design procedures for determining the size of components of the jet pumps are not known so well. In this paper, the flow characteristics of the jet pump, which is applied in the fuel transfer system for the smart UAV (Unmanned Aerial Vehicle), were experimentally investigated using the acrylic jet pump model for the visualization of the internal flow. The pressure distributions within the jet pump were measured, and then the loss coefficients of each part were calculated. The effects of Reynolds number and the distances (S) between the exit of the primary nozzle and the mixing chamber entrance were investigated. In addition, cavitation phenomena were considered through the flow visualization inside the jet pump. As a conclusion from the experiment, the contraction shape of the primary nozzle has a strong effect on the loss coefficient of the nozzle and the cavitation occurrence. Cavitation starts around the nozzle exit, and then it propagates to the full flow fields of the jet pump.

• Natural Product Sciences
• /
• 제17권4호
• /
• pp.315-320
• /
• 2011

Routinely applicable HPLC assay procedures for the ganglioside content in various deer antler preparations were established through the creation of a UV-absorbing chromophoric substance - trans-${\alpha},{\beta}$-unsaturated-hexadecene-aldehyde - from the sphingosine moiety in ganglioside molecules by two step chemical reactions. In order to guarantee the assay's accuracy and sensitivity, the HPLC-assay procedure adopted internal reference procedures by mixing cis-${\alpha},{\beta}$-unsaturated-hexadecene aldehyde[V] or cis-3-heptadecene- 1,2-diol[IV] to assay samples. The internal reference compound [IV] or [V] was synthesized in our laboratory starting from mannitol-diacetonide through three or four step organic reactions. This new HPLC-assay procedure was successfully applied to deer antler extracts with good dose-dependent calibration curves at the picomole level of gangliosides.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.95-101
• /
• 2010

For the development of higher-sizing performance of paper, a sizing agent using recycled PET was synthesised. Polyester resin was extracted from wasted PET by subcritical hydrolysis and finally modified to synthetic sizing agent by mixing water-disperse PET with triphenyl phosphite(TPP). The modified PET was considered as an internal sizing agent in different wet-end papermaking conditions. The optimum condition in sizing efficiency was obtained in initial pH of 6.5 in case of rosin+alum system, and 7.5 in case of rosin+alum+PET system, respectively, and in addition amount of PET 3%. The sizing efficiency was also closely related according to the fiber properties of wet-end slurry, such as virgin fibres from UKP and recycled fibres from KOCC. The application of modified PET was good in strength improvement of paper, specially in tensile strength.

• Ocean and Polar Research
• /
• 제37권2호
• /
• pp.107-117
• /
• 2015

Thorpe scale analysis was performed using two sets of 25-hour-long hourly CTD data. Raw density profiles collected on the continental slope of the southwestern East Sea were post-processed to reduce instrument noises and measurement errors. Density inversions were detected by applying the overturn ratio test proposed by Gargett and Garner (2008). The value of $K_z$ below the main thermocline estimated with the Osborn parameterization was $5.3{\times}10^{-4}(1.1{\times}10^{-4})m^2s^{-1}$ and that with the Shih parameterization was $5.9{\times}10^{-5}(2.4{\times}10^{-5})m^2s^{-1}$during the spring (neap) tidal period. This result suggests that internal tides can enhance vertical mixing in the observation region.

• 한국의류학회지
• /
• 제32권1호
• /
• pp.77-87
• /
• 2008

Modern fashion industry creates complex and multiple fashion by amalgamating and mixing all elements that emerged in fashion without limiting them to a specific genre. The results of study are as follows: First, with regard to the conceptual differences among poor look, anti-fashion, and resistance fashion and the background. second, As aesthetic categories of poor beauty, its image with the feeling of poorness, beggar-likeness, worthlessness, poorness, and uncleanness is divided into the beauty of moderation, deconstruction, unfinished beauty, natural beauty, and ostentatious poor beauty based on the formative characteristics and poor look. Third, Oriental and Western poor images are comparatively analyzed. The poor beauty found in Oriental fashion, which is based on Zen aesthetics, seeks loneliness, poorness, and simplicity as an empty origin and features internal meaning that expresses the purity of poor beauty itself and external form that is visualized through no decoration, no color, and asymmetry in material and composition. The poor beauty in the West features non-form of no shape, asymmetry and disharmony and the characteristic in its contents is "distortion", and the characteristic in its expression features external form of "incorrectness" and internal meaning implying modem humans' frustration, resistance to materialism, and skepticism about mechanicalism.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.15-22
• /
• 2008

For the improvement of letterpress printing paper quality, special fibers obtained from the sea were used by mixing with wood fibers. The sizes of the special fibers, which were from red algae in the sea, were 0.5-1 mm in length, and 3-7 ${\mu}m$ in width, respectively, and the fibers were supplied by Pegasus Research Inc. for the study. From the study, it was found that 10% addition of algae fibers greatly improved paper surface strength and internal bonding strength. The compressibility was estimated by utilizing 'Print-surf method' at high clamping pressure and with hard backing. Again, 10% addition of algae fibers greatly improved the compressibility of the paper. These results were expected that algae and wood fibers were distributed evenly through the sheet, and integrated one another to leave no empty space inside the paper.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.149-155
• /
• 2017

This study is analyzed combustion phenomena based on the environmental energy facility incinerator. It is assumed that combustible components of waste are composed of carbon and hydrogen, and the combustion process of fuel is by setting as multi-component / multistage reaction. As the combustion chamber is burned, the high temperature environment is achieved, also the heat transfer accompanied by the turbulent flow and the generation of NOx, a pollutant, are interpreted to predict the thermal and fluid characteristics and pollution emissions of the grate incinerator. As the result of internal flow analysis, the slow flow around the ash chute and the mixing effect due to the complicated turbulence around the combustion chamber were predicted to show excellent performance. It is shown to the internal average temperature was about $1024^{\circ}C$, around the about $1000^{\circ}C$ homogeneous temperature distribution. Due to the sudden temperature decrease in the boiler, the flue gas temperature at the outlet was estimated to be about $220^{\circ}C$.