• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.67-72
• /
• 2018

This study was conducted to investigate a potential of Yellow poplar (Liriodendron tulipifera L.) as a raw material for the manufacturing of particleboard (PB) and oriented strandboard (OSB). PB panels were prepared at the parameters of $0.7g/cm^3$ density, 15 mm thickness, three-layer, $E_1$ grade urea-formaldehyde (UF) resin, emulsion wax, and hardener. OSB panels were manufactured with a density of $0.65g/cm^3$, thickness of 10 mm, and $E_1$ grade of UF resin. Particle size of the face layer of PB was 20~80 mesh with 7~9% moisture content (MC), while that of core-layer was 3~20 mesh with 3~5% MC, which was similar to the production condition of commercial PB. As a result, the manufactured PB panels with 15.8 mm thickness, $0.7g/cm^3$ density, and 5.8% MC satisfied the requirement of bending strength of 15 type PB of Korean Industrial Standard (KS F 3104). Both internal bonding (IB) strength and surface screw withdrawal resistance also satisfied the requirement of 18 type PB of the standard. But, the edge screw withdrawal resistance satisfied the requirement of 15 type PB of the standard. These differences in properties could be due to the slenderness ratio of raw particles. In case of OSB panels with 10.7 mm thickness, $0.68g/cm^3$ density, and 5.8% MC satisfied all the requirements of bending strength, screw withdrawal resistance, and IB strength of 18 type PB of the standard. These results suggest that Yellow poplar wood has a good potential as a raw material for the production of PB and OSB.

• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.99-104
• /
• 2014

The objective of this study is to analyze the production of extra-large egg and assess the impacts of exogenous factors in feeding the layer chicken. The main results of this study are as follows; First, feeding rations on the basics of statistics, internal maximum and minimum temperature and, the age at first egg affect the production of extra-large egg. Second, implicating the standardized coefficients from the conclusion of regression model estimating suggest that the amount of feed has the greatest impact on production followed by the age at first egg. Third, by using the elasticity of output and the volatility in the production, the result suggest that among the independent variable factors in the external volatility, the biggest one goes to feed ration, and the age at first egg follows. In order to control the production volatility in the extra-large egg production of the farms, it is necessary to manage an efficient feeding based on feed ration, age at first egg and, the maximum and minimum temperature inside the farm. Taken together, the results demonstrates that it should be concentrated by controlling the exogenous factors affecting extra large egg production and the management system construct, to increase extra-large egg production and the income of farmers at the same time.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.203-212
• /
• 2023

This study conducted a diallel-crossbreeding test using four Korean native chicken parent stock lines (YC, YD, CK, and CF) to develop a native commercial layer with high egg-laying performance. A total of 312 chickens in six combinations were examined for various traits, including livability, body weight, age at first egg-laying, hen-day, and hen-housed egg production, egg weight, and egg quality, from hatching to 60 weeks of age. The results showed that the average survival rate was 77.1±18.8% with the YDYC combination having the highest survival rate along with excellent specific combining ability. The YDYC combination exhibited significantly higher body weight compared to the other combinations (P<0.01). The average age at first egg-laying was 121.3±2.5 days, with no significant difference between the combinations. The average hen-day egg production was 74.0±6.4%, and the hen-housed egg production was 181.4±33.8 eggs with the YDCF and YCCK combinations demonstrating the highest laying performance, while the YDYC and CKCF combinations had the lowest (P<0.05). Laying performance was more influenced by specific combining ability than general combining ability. The eggs from the YDYC combination were significantly lighter and had the darkest shell color (P<0.01), whereas the YDCF combination exhibited the thickest eggshells. There was no difference in internal egg quality among combinations, except the YDCF combination had the darkest yolk color. Overall, we concluded that the YCCK combination, characterized by high laying performance and livability, and the YDCF combination with high laying performance and good egg quality are the most desirable combinations for Korean native commercial layers.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.1
• /
• pp.59-68
• /
• 1997

Background : Tuberculous chest wall abscess is a rare complication of tuberculosis. However, there have been few reports about the variable extents and shapes of tuberculous chest wall abscesses. We analyzed the extent and shape of tuberculous chest wall abscess-es and grouped them according to combined pleuroparenchymal lesions by CT scans. Materials and Methods : CT findings were evaluated in 20 patients of tuberculous chest wall abscesses. We classified 29 abscesses in 20 patients into three types according to pleuroparnechymal lesions. Type 1 was defined when there was no active pleuroparenchymal lesion, Type 2, when intrathoracic tuberculosis was contacted with chest wall abscess, Type 3, when ipsilateral subpleural nodules were not contacted with chest wall abscess. Results : The type 1 included 6 abcesses in 6 patients. They showed rib and/or costal cartilage destruction in their center. They were relatively large and round. The type 2 included 13 abscesses in 10 patients. The abscesses in contact with pleural lesion or mediastinal lesion were mainly located in the outer muscle layer, and they were relatively large in size. However, the abscesses in contact with parenchymal lesion were mainly located in extrapleural space. They were relatively small and they were longest along the long axis of ribs. The type 3 included 10 abscesses in 6 patients. They were located mainly in the extrapleural space. Conclusion : Tuberculous chest wall abscess-es showed variable extents and shapes according 10 pleuroparenchymal lesions. CT is a good diagnostic modality to visualize the extent of tuberculous chest wall abscess and combined pleuroparenchymal lesion.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.353-359
• /
• 2000

'Yumyeong' is one of the most popular peach varieties in Korea. This study was conducted to monitor the developments of cells and tissues, and the changes in sugar contents during fruit growth and development. At bloom, there were two rows of vascular tissues, and the number and the position of internal vascular bundles were consistent during the fruit growth, however, the number of vascular tissues were increased and the distribution was irregular in the flesh tissues. The tissues between the inner integument and the internal vascular bundles showed different development characteristics from other parenchyma cells which were consisted of small and dense cells containing tannins. Such observation suggested that the stone of peach was consisted of inner epidermis and cells in the internal vascular tissues. The outer epidermis consisted of single layer cells at bloom differrentiated into 1-2 layers by horizontal cell divisions on 14 days after full bloom. On 30 days after full bloom, the epidermis was consisted of 5-6 layers by vertical cell divisions. The cell layers consisting the outer epidermis were gradually decreased to 1-2 layers at maturity. The observations on the changes in the epidermis confirmed that some of the cells consisting the hypodermis of peach fruit were originated from the cells of outer epidermis. Tylosis was observed from 35 days after full bloom and the size and number of tylosis were increased until full fruit maturity. The sucrose content showed the tendency of sharp increase from 50 days to 120 days after full bloom then decrease slightly. After when stone hardening ended, other solids showed a gradual decrease tendency from 80 days after full bloom.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.89-109
• /
• 1999

Vascular spasm which has been reported to occur in 25% of clinical cases continues to be a problem in microvascular surgery; When prolonged and not corrected, it can lead to low flow, thrombosis, and replant or free flap failure. Ischemia, intimal damage, acidosis and hypovolemia have been implicated as contributors to the vascular spasm. Although much work has been done on the etiology and prevention of vasospasm, a spasmolytic agent capable of firmly protecting against or reversing vasospasm has not been found. Therefore vascular freezing was introduced as a new safe method that immediately and permanently relieves the vasospasm and can be applied to microsurgical transfers. Cryosurgery can be defined as the deliberate destruction of diseased tissue or relief the vascular spasm in microvascular surgery by freezing in a controlled manner. 96 Sprague Dawley rats each weighing within 250g were used and divided into 2 group, experimental 1 and 2 group. In the experimental 1 group, right epigastric vessels (artery and vein) were freezed with a cryoprobe using $N_2O$ gas for 1 min. In the experimental 2 group, after freezing for 1 min, thawing for 30 secs and repeat freezing for 30 secs. Left side was chosen as control group in both group. We sacrified the experimental animals by 1 day, 3 days, 1 week, 2 weeks, 4 weeks & 5 months and observed the sequential change that occur during regeneration of epigastric vessels using a histologic, histomorphometric, immunohistochemical and SEM study after the vascular freezing. The results were as follows1. In epigastric arteries, internal diameters had statistically significant enlargement in 1 day, 3 days of Exp-1 group and 1 day, 3 days, 1 week & 2 weeks of Exp-2 group. Wall thickness had statistically significant thinning in 2 weeks of Exp-2 group. 2. In epigastric veins, internal diameters had enlargement of statistical significance in 1 day of Exp-1 and Exp-2 group. 3. The positive PCNA reactions in smooth muscle appeared in 1 week and increased until 2 weeks, decreased in 4 weeks. There was no statistical significance between Exp-1 and Exp-2 group. 4. The positive ${\alpha}$-SMA reaction in smooth muscles showed weak responses until 1 week and slowly increased in 2 weeks and showed almost control level in 4 weeks. 5. The positive S-100 reactions in the perivascular nerve bundles showed markedly decrease in 1 day, 3 days and increased after 1 week and showed almost control level in 4 weeks. Exp-1 group had stronger response than Exp-2 group. 6. In SEM, we observed defoliation of endothelial cell and flattening of vessel wall. Exp-2 group is more destroyed and healing was slower than Exp-1 group. To sum up, relief of vasospasm (vasodilatation) by freezing with cryoprobe was originated from the damage of smooth muscle layer and perivascular nerve bundle and the enlargement of internal diameter in vessels was similar to expeimental groups, but Exp-2 group had slower healing course and therefore vessel freezing in microsurgery can be clinically used, but repeat freezing time needs to be studied further.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.69-79
• /
• 2007

The purpose of this study was to investigate the effects of composite resin restorations on the stress distribution of notch shaped noncarious cervical lesion using three-dimensional (3D) finite element analysis (FEA). Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072 ; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid or flowable resin and each restoration was simulated with adhesive layer thickness ($40{\mu}m$) A static load of 500 N was applied on a point load condition at buccal cusp (loading A) and palatal cusp (loading B). The principal stresses in the lesion apex (internal line angle of cavity) and middle vertical wall were analyzed using ANSYS. The results were as follows 1. Under loading A, compressive stress is created in the unrestored and restored cavity. Under loading B, tensile stress is created. And the peak stress concentration is seen at near mesial corner of the cavity under each load condition. 2. Compared to the unrestored cavity, the principal stresses at the cemeto-enamel junction (CEJ) and internal line angle of the cavity were more reduced in the restored cavity on both load con ditions. 3. In teeth restored with hybrid composite, the principal stresses at the CEJ and internal line angle of the cavity were more reduced than flowable resin.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.164-179
• /
• 2014

The Buddhas of the Three Words in a form of arranging Bhaiṣajyaguru and $Amit{\bar{a}}bha$ at its side based on ${\acute{S}}{\bar{a}}kyamuni$ at the center is enshrined in Daeungbojeon Hall of Daeheungsa Temple located at Haenam. So far, this Buddhas of the Three Words has been known as a wooden Buddha statue. However, as a result of X-ray screening, in left/right Buddha statues excepting main Buddha, wood and molding clay layer were observed at the same time. Therefore, this study intended to observe its internal structure, grafting method and to clarify making technique of Buddha statue during Joseon era based on image information being obtained through X-ray screening of The Buddhas of the Three Words of Daeheungsa Temple. As its result, it was revealed that form of ${\acute{S}}{\bar{a}}kyamuni$ was completed by mainly grafting 5 pieces of timber and this statue shows a typical wood grafted Buddha statue during Joseon era. Form of Bhaiṣajyaguru and $Amit{\bar{a}}bha$ were completed based on molding technique by applying clay on sculpture similar to its appearance after sculpturing more than 10 pieces of timber through its grafting. In other words, internal timber is considered to play a role of its core and grafting method of timber is more close to a technique of molding Buddha statue than to that of wooden Buddha statue during Joseon era. However, clay was directly applied on timber thinly, not applying clay thickly on it after winding straw rope on wooden core and its characteristic is that its facial area was completely composed of wooden construction only. Therefore, it is hard to rule out a possibility that the original sculpturing intention of an artist might be a wooden Buddha statue but in view of the fact that a word, 'molding' was used in a record of relics buried in statue, it could be seen that this Buddha statue might have been recognized as a molding statue at the time when creation of this statue was completed. It is considered that number of case of making statue based on this technique would be more increased when more results of X-ray screening should be accumulated and if more data should be collected, it would provide a significant evidence for identifying chronological, regional aspects of making technique of Buddha statue.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.592-602
• /
• 2014

In the Integrated Gasification Combined Cycle (IGCC), the stability of the gasifier has strong influences on the rest of the plant as it supplies the feed to the rest of the power generation system. In order to ensure a safe and stable operation of the entrained-flow gasifier and for protection of the gasifier wall from the high internal temperature, the solid slag layer thickness should be regulated tightly but its control is hampered by the lack of on-line measurement for it. In this study, a previously published dynamic simulation model of a Shell-type gasifier is reproduced and two different linear model predictive control strategies are simulated and compared for multivariable control of the entrained-flow gasifier. The first approach is to control a measured secondary variable as a surrogate to the unmeasured slag thickness. The control results of this approach depended strongly on the unmeasured disturbance type. In other words, the slag thickness could not be controlled tightly for a certain type of unmeasured disturbance. The second approach is to estimate the unmeasured slag thickness through the Kalman filter and to use the estimate to predict and control the slag thickness directly. Using the second approach, the slag thickness could be controlled well regardless of the type of unmeasured disturbances.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.117-131
• /
• 2007

Representation of building internal space is an active research area as the need for more geometrically accurate and visually realistic increases. 3 dimensional representation is common ground of research for disciplines such as computer graphics, architectural design and engineering and Geographic Information System (GIS). In many cases CAD plans are the starting point of reconstruction of 3D building models. The main objectives of building reconstruction in GIS applications are visualization and spatial analysis. Hence, CAD plans need to be preprocessed and edited to adapt to the data models of GIS SW and then georeferenced to enable spatial analysis. This study automated the preprocessing of CAD data using AutoCAD VBA (Visual Basic Application), and the processed data was topologically restructured for further analysis in GIS environment. Accuracy of georeferencing CAD data was also examined by comparing the results of coordinate transformation by using digital maps and GPS measurements as the sources of ground control points. The reconstructed buildings were then applied to visualization and network modeling.