• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5467-5473
• /
• 2014

This study examined the numerical analysis results with respect to the thermal behavior of a natural convection cooled pin-fin heat sink. The heat sink consisted of pin fins integrated with plate fins. The heat sinks were designed with two different types to fit the limited internal space. The two types of heat sinks designed were analyzed using the ANSYS software package, and the numerical analysis results were compared with the cooling performance of the two types of heat sinks. The results of the simulation were analyzed according to the temperature distribution and air flow characteristics, heat flux etc. This study examined the correlation of the cooling performance with the heat sink internal structure and fin shape. FEM (Finite Element Method) confirmed the cooling performance of heat sink type A under natural convection conditions as the best results. The results of the numerical simulation showed that the heat sink type A shape showed an approximately 70 percent better heat transfer rate with natural convection than that of type B.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.31-41
• /
• 2016

A computer program that simulates electric utility steam condensers was developed, and used to investigate the effects of enhanced tubes in steam condensers. The replacement of smooth tubes with enhanced tubes reduces the steam condensing temperature, and increases the efficiency of the electric utility. Therefore, a significant amount of power may be reserved without any modification of the utility. Three enhanced tubes, corrugated, low fin with internal ribs, and low fin with internal 3-D roughness, were considered. The results showed that there is an optimal internal roughness height. Low fin tubes with a 3-D roughness were superior to the other enhanced geometries. This was attributed to longitudinal vortices generated between the circumferential dimples. An additional 0.5 MW~1.3 MW was possible when smooth tubes were replaced with enhanced tubes in the 600 MW electric utility condenser. The additional power increased with increasing coolant temperature. More investigations on fouling, corrosion, and mechanical properties will be necessary for actual applications of enhanced tubes in electric utility condensers.

• Journal of Korea Port Economic Association
• /
• v.30 no.3
• /
• pp.15-37
• /
• 2014

Sustainability is a broad concept involving economic, social and environmental issues in operational and managerial processes. To assist ports to implant sustainability practices into their operations, this paper conceptualizes the structure of sustainability practice in port operations, based on interviews undertaken at Busan port in early 2013. Results revealed that, as a strategic practice to improve their internal business processes, sustainability practices necessitate the simultaneous pursuit of container traffic growth, low environmental impacts and corporate responsible image making, operational efficiency, efficiency of the use of the port area and sustainable growth. Through thematic analysis, the relevant practices were clustered into four sub-dimensions incorporating environmental technologies, continual monitoring and upgrading, internal process improvement, and cooperation and communication. Further, reporting the relevant issues such as barriers and challenges in carrying out sustainability practices, the findings provide useful insights for strategic agenda to assist ports to incorporate sustainability practices in their operations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1149-1156
• /
• 2014

In order to reduce flood damages, there should demand an appropriate design such as enlarging a bank, dredging a river bottom, building a hydraulic structure and so on. The installation locations about the Watergate are listed of the seven provisions in the river design standard, but it is not detailed. In order to compute proper place considering landuse and basin characteristics of inlands, internal inundation modeling that should be performed is regarded with quantitative evaluation. Anyway, that is very complex and taking a long time because that has to consider hydraulic and hydrologic characteristics. In the current study, therefore, the simple and convenient method for internal inundation modeling was proposed to overview the Watergate location.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4801-4811
• /
• 2011

The purpose of this study is to examine the factors influencing performance of internal, external environment and entrepreneurship in the social enterprise with network activity. This model tests various theoretical research hypotheses relating to performance of social enterprise, internal, external environment, entrepreneurship and network activity. The proposed model is analyzed to target social entrepreneurs. The results of hypothesis testing are as follows. First, organizational culture positively influence entrepreneurship. Second, environmental uncertainty positively influence entrepreneurship. Third, entrepreneurship positively influence managerial and social performance. Finally, organizational culture to entrepreneurship for high group of network activity is significantly larger than those for low group of network activity. In addition, environmental uncertainty to entrepreneurship for low group of network activity is significantly larger than those for high group of network activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.150-159
• /
• 2021

This study aimed to prevent inconvenience to electric vehicle users caused by an interruption of charging by the earth leakage breaker trip that occurs during charging. As a field case study, it was confirmed that during the battery charger failure type, leakage current measurement experiment by vehicle type, and leakage current breaker operation experiment, the internal temperature of the charger rose to more than 60 ℃ in summer, and the earth leakage circuit breaker stopped charging by tripping at 80% of the rated sensitivity current. Through Joule heating modeling, 32A is energized at the reference temperature of 30 ℃ at the initial time t=0 (s). After t=3000 (s), the heat generated around the charging part of the earth leakage breaker increased to 32.4 ℃. The temperature and time factors correlated with the amount of heat generated according to the statistical verification tool with a correlation coefficient of 0.97. Overall, it is possible to prevent the leakage breaker sensitivity current trip due to an increase in temperature inside the charger in summer by performing a Joule heating simulation according to the material of the charging case, the arrangement of the internal wiring, and the dielectric medium when developing the charger device.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.655-660
• /
• 2018

Internal combustion generation (ICG) is used to supply power to islands due to geographical characteristics, but there are some problems, such as considerable operating cost, salt pollution, and environmental pollution. For these islands, KEPCO pays a significant amount of operating deficit each year, especially for the fuel and servicing costs, which account for a large portion of this deficit. Integrated ICG (IICG) through an offshore cable between near islands is being considered to decrease servicing costs. Distributed generation (DG) is also being introduced on the islands because of the demand for a low-carbon society. In hybrid internal combustion generation (HICG), DG is introduced into IICG, which can be applied because the DG output is insufficient due to environmental characteristics, and the IICG is used as an auxiliary power source. Therefore, this paper proposes an algorithm to estimate the optimal DG capacity that can be introduced in accordance with the KEPCO operating deficit in the HICG. According to simulations, the optimal DG capacity depends on the fuel cost and load capacity. The validity of the proposed algorithm was confirmed for multiple islands with different peak loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6432-6439
• /
• 2014

The NAUT (Non-contact Air coupled Ultrasonic Testing) technique is one of the ultrasonic testing methods that enables non-contact ultrasonic testing by compensating for the energy loss caused by the difference in acoustic impedance of air with an ultrasonic pulser receiver, PRE-AMP and high-sensitivity transducer. As the NAUT is performed in a state of steady ultrasonic transmission and reception, testing can be performed on materials of high or low temperatures or specimens with a rough surface or narrow part, which could not have been tested using the conventional contact-type testing technique. For this study, the internal defects of spot weld, which are often applied to auto parts, and CFRP parts, were tested to determine if it is practical to make the NAUT technique commercial. As the spot welded part had a high ultrasonic transmissivity, the result was shown as red. On the other hand, the part with an internal defect had a layer of air and low transmissivity, which was shown as blue. In addition, depending on the PRF (Pulse Repetition Frequency), an important factor that determines the measurement speed, the color sharpness showed differences. With the images obtained from CFRP specimens or an imaging device, it was possible to identify the shape, size and position of the internal defect within a short period of time. In this paper, it was confirmed in the above-described experiment that both internal defect detection and image processing of the defect could be possible using the NAUT technique. Moreover, it was possible to apply NAUT to the detection of internal defects in the spot welded parts or in CFRP parts, and commercialize its practical application to various fields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.89-95
• /
• 2020

This study is a descriptive research to investigate the effects of nurses' internal orientation, social support and job orientation on turnover intention. The subjects were two university hospital nurses in D metropolitan city who agreed to participate in the study. Data collection was conducted from October 2, 2018 to March 20, 2019. The data were analyzed using SPSS 22.0 program, frequency and percentage, mean and standard deviation, correlation analysis, t-test, ANOVA, Pearson's correlation, and multiple regression. The study results were 3.04 ± .62 points for internal orientation policy, 3.08 ± .55 points for social support, 3.81 ± .59 points for peers, 3.67 ± .60 points for family members, and 2.98 ± 0.43 points for job placement and intention to turnover. The degree of turnover decreased with higher internal orientation, social support and job orientation. An examination of the general characteristics of the factors affecting turnover intention showed significant results with clinical experience and working department. The higher the clinical experience, the higher the turnover intention, and the department of work showed the higher turnover intention in the order of surgical ward, medical ward, ICU, and OR. These results show the need to actively develop and educate programs to improve nurses' intention to turnover, as well as internal hospital-oriented policies, social support, and job placement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.120-127
• /
• 2020

This study examined the operation of a pressure gauge for measuring the internal pressure of a barrel. During the ammunition performance evaluation test, the internal pressure of the barrel was measured mainly using a copper crusher gauge. The internal piezo gauge (IPG) was used to replace the pressure measurement method, and the test results were analyzed to verify the operability of the IPG. For verification, actual shooting test data were used, and a t-test was used to analyze the results. The 155MM KH179 and M119 series propellant were used for the test equipment and ammunition. The results confirmed that there was no difference between the mean values of the two data results at a significance level of 5% for the data values between the copper gauge and the IPG. The use of the IPG was verified by replacing the existing copper gauge to measure the internal pressure of the barrel, and it was confirmed that the application width could be widened in terms of diversity of test measurement methods. Based on the results of this test, it can be applied to the compression measurement test of various types of ammunition in addition to the propellant charges.