• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.40-47
• /
• 1998

This paper presents the physiological signal processing CMOS one chip for transmitting human bodys small electrical signals such as electrocardiogram(EKG) or electromyogram(EMG) and the external system for receiving signals was implemented by the commercial ICs. For simultaneous four-subject four-channel telemetry, a new enfored synchronization techniqeu using infrared bi-directional communication has been proposed. The telemeter IC with the size of 5.1*5.1mm$^{2}$ has the following functions: receiving of command signal, initialization of internal state of all functional blocks, decoding of subject-selection signal, time multiplexing of 4-channel modulated physiological signals, transmitting of telemetry signal to external system and auto power down control. The newly designed synchronized oscillator with low supply voltage dependence in the telemeter IC operates at a supply voltage from 4.6~6.0V and the nonlinearity error of PIM modulator was less than 1.2%F.S(full scale). The power saving block operates at the period of 2.5ms even if the telemetry IC does not receive command signal from external system for a constant time.

• 센서학회지
• /
• 제9권6호
• /
• pp.448-454
• /
• 2000

This paper describes the implementation of a multi-subject, multi-channel optical telemetry system for the short range measurement of electrocardiograms (EKGs) a system which receives command signals and transmits physiological signals to the external system using LED (Light Emitting Diode) and PD (Photodiode). This system decreases the dependency of power supply voltage to the CMOS IC chips and a new enforced synchronization technique using infrared bi-directional communication has also been proposed. The telemetry IC with the size of $5.1{\times}5.1mm^2$ has the following functions: receiving of command signal, initialization of internal state of all functional blocks, decoding of subject selection signal, time division multiplexing of 4-channel modulated physiological signals, transmission of modulated signals to external system, and auto power down control.

• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.142-150
• /
• 2021

Open-channel SSD is a new type of Solid-State Disk (SSD) that improves the garbage collection overhead and write amplification due to physical constraints of NAND flash memory by exposing the internal structure of the SSD to the host. However, the host-level Flash Translation Layer (FTL) provided for open-channel SSDs in the current Linux kernel consumes host memory excessively because it use page-level mapping table to translate logical address to physical address. Therefore, in this paper, we implemente a selective mapping table loading scheme that loads only a currently required part of the mapping table to the mapping table cache from SSD instead of entire mapping table. In addition, to increase the hit ratio of the mapping table cache, filesystem information and mapping table access history are utilized for cache replacement policy. The proposed scheme is implemented in the host-level FTL of the Linux kernel and evaluated using open-channel SSD emulator. According to the evaluation results, we can achieve 80% of I/O performance using the only 32% of memory usage compared to the previous host-level FTL.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.138-142
• /
• 2015

Most of the existing studies on functional safety testing for the railway signaling system software have focused on verifying the functional safety through the monitoring of internal memory embedded railway signaling system. However, the railway signaling system is one of the typical embedded control system in the railway sector, and the embedded software has a characteristic of generating an appropriate outputs through the combination of internal processing in consideration of the current internal status and external input. Therefore, the test approach of using the interface communication channel can be effective way for the functional testing for railway signaling system software in consideration of these characteristic. Since a communication interface specification of the railway signal system has a the properties of the sequence input and output signals, test-case for software testing is the most effective methodology by MSC (Message Sequence Chart) language, one of the graphic language. The MSC-based test-case generating methodology for signaling system software was proposed in this paper.

• 디지털융복합연구
• /
• 제6권2호
• /
• pp.55-64
• /
• 2008

The Internet possesses not only features of mass media but also features of word of mouth communication. Communication channel is considered as one of most important variables in diffusion process. In this paper, we examined functionality of technology diffusion on the Internet through the use of meta tags. We have measured the coefficients of the Bass diffusion model which has been well-established in new product diffusion. This research shows that the Bass model is appropriate for describing technology diffusion on the Internet. The external influence as represented by the coefficient of innovation was found to be much smaller while the internal influence dominates in all meta tag diffusion. In meta tag diffusion, the internal influence as represented by the coefficient of imitation was increased at least twice bigger than that of consumer durables and information technology. Collecting necessary data in social sciences research can be a burden. This research shows that it can be alleviated through the use of software agents over the Internet. The research made use of software agents for collecting longitudinal data from publicly accessible archive such as Archive.org.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.271-273
• /
• 2006

In this paper, we describe the MI2U ORB function which is a part of the flight software executed on SCU and controls MI2U/MI which is one of three payloads on COMS. The MI2U ORB function manages MI2U/MI redundancy and reconfiguration, monitors MI2U/MI equipment, performs FDIR, and provides the routing service of commands from Ground/IP (Interpreted Program) through the current used 1553 channel. The MI2U hardware achieves the interface between the SCU and the MI. The MI2U is connected to SCU through MIL-STD-1553B system bus. The MI2U has the internal redundancy but is used in cold redundancy. The MI2U ORB function considers that they are not expected to be simultaneously switched on. The connection combination between MI2U and MI is electrically cross-strapped. However the MI2U ORB function considers only two combinations (MI2U A + MI 1, MI2U B + MI 2). Other combinations can be manually achieved by ground in case of the emergency case.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.683-691
• /
• 2003

This exploratory study aims to investigate issues that, according to the Nonaka's theoretical model, are believed to hold significant ramifications on the effectiveness of creating and sharing organizational knowledge among distributed workers. These include changes in accessibility of knowledge with different levels of implicity, and the choice of communication media as a knowledge management channel. Related data were gathered from distributed-workers in Japan through interviews and a survey questionnaire. Data analysis revealed changes in the dynamics of internal and external interactivity, in the accessibility of necessary knowledge, and in the reliance on electronic media for knowledge exchange. The findings' implications are discussed from the perspective of knowledge creation ana sharing, and further suggestions have been made for the direction of future research efforts.

• 방송공학회논문지
• /
• 제10권3호
• /
• pp.401-412
• /
• 2005

HFC 망에서 대칭형 멀티미디어 서비스가 가능하도록 상향채널에서 보다 많은 채널과 QoS를 제공할 수 있는 S-DMT방식의 상향채널 케이블모뎀 복조기를 위한 심볼 타이밍 복원, 반송파 복원, 등화기 알고리즘을 제안하고 설계한다. 또한 이 들 블록을 연동시켰을 경우의 성능을 평가한다. 평가에 있어서 변조 방식은 16QAM, 64QAM 인 경우로 하였고 AWGN, ISI, 및 임펄스 잡음이 혼재하는 채널 환경을 전제로 하였다. 전체 시스템 연동 시뮬레이션 결과, 예상한 대로 잡음 환경이 악화됨에 성능열화가 발생하나, 설계한 알고리즘들이 정확히 동작할 뿐 아니라 우수한 성능을 보이고 있음을 확인하였다. 또한, 임펄스 잡음 환경에 대해서 임펄스 잡음 발생 구간 $\varepsilon$ 및 전력 크기 $\gamma^{k} $를 변수로 성능 평가를 해 본 결과, 케이블 TV 망 상향 채널에서의 임펄스 잡음에 대해 면역성이 우수함을 알 수 있었다.

• 센서학회지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2009

It is said that the desirable bio-signal measurement and stimulation system should be an implantable type if the several problems such as biocompatibility, electrical safety, and so on are overcome. In addition to the biocompatibility issue, a robust RF communication and a stable electrical power source for the implantable bio-signal measurement and stimulation system are very important matters. In this paper, a wireless telemetry system which adopts the FCC's approved MICS (medical implant communication service) protocol and a wireless power transmission has been proposed. The proposed system composed of a base station (BS) and an implantable medical device (IMD) has the advantages that the interference with other RF devices can be reduced by the use of the specially assigned MICS frequency band of 402.MHz to 405 MHz. Also, the proposed system includes various functions of a multi-channel bio-signal acquisition and an electric stimulation. Since the electrical power for the IMD can be provided by the inductive link between PCB patterned coils, the IMD needs no battery so that the IMD can be smaller size and much less dangerous than the active type IMD which includes the internal battery. Finally, the validity as a wireless telemetry system has been demonstrated through the experiments by using the implemented BS and IMD.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.