• 제목/요약/키워드: Intermediate treatment

검색결과 518건 처리시간 0.031초

Reverse-bias Leakage Current Mechanisms in Cu/n-type Schottky Junction Using Oxygen Plasma Treatment

  • Kim, Hogyoung
    • Transactions on Electrical and Electronic Materials
    • /
    • 제17권2호
    • /
    • pp.113-117
    • /
    • 2016
  • Temperature dependent reverse-bias current-voltage (I-V) characteristics in Cu Schottky contacts to oxygen plasma treated n-InP were investigated. For untreated sample, current transport mechanisms at low and high temperatures were explained by thermionic emission (TE) and TE combined with barrier lowering, respectively. For plasma treated sample, experimental I-V data were explained by TE or TE combined with barrier lowering models at low and high temperatures. However, the current transport was explained by a thermionic field emission (TFE) model at intermediate temperatures. From X-ray photoemission spectroscopy (XPS) measurements, phosphorus vacancies (VP) were suggested to be generated after oxygen plasma treatment. VP possibly involves defects contributing to the current transport at intermediate temperatures. Therefore, minimizing the generation of these defects after oxygen plasma treatment is required to reduce the reverse-bias leakage current.

저.중준위 방사성 폐기물의 고화처리 및 처분용 용기 개발을 위한 기초연구(1) (A Basical Study on the Preparing of Container Used for Treatment and Disposal of Low-and Intermediate-Level Radioactive Wastes(I))

  • 홍원표;정수영;황의환;조헌영;김철규
    • 한국세라믹학회지
    • /
    • 제25권2호
    • /
    • pp.101-110
    • /
    • 1988
  • In order to improve the physical properties of concrete used for treatment and disposal container of low-and intermediate-level radioactive wastes, OPC (ordinary portland cement), ACPC (asphalt coated portland cement) and EPC(epoxy-portland cement) concrete specimens were prepared, and the physical properties of each concrete specimen were tested. According to the experimental results, EPC concrete showed better physical properties than ACPC and OPC concrete, however, ACPC concrete proved to be a best material for treatment and disposal container of radwastes in view of economic aspect and physical properties.

  • PDF

국내 건설폐기물 기업의 재무적 특성과 이익조정 간의 관계 - 중간처분업 특성의 조절효과를 중심으로 (Relationships between Financial Characteristics and Earnings Management in Domestic Construction Waste Disposal Companies - Focusing on the moderating effects of intermediate-level waste treatment services)

  • 현상호;이남령;이상학;김기웅
    • 한국콘텐츠학회논문지
    • /
    • 제19권12호
    • /
    • pp.68-83
    • /
    • 2019
  • 건설폐기물 기업의 중간처분업 특성은 이익조정의 여지가 큰 기업에서는 재무적 특성과 이익조정 간의 관계에서 이익조정 유인을 촉진하는 요인으로 작용하기 때문에 부정적 영향을 미칠 가능성이 크다. 이에 본 연구에서는 국내 건설폐기물 기업을 대상으로 중간처분업 특성을 고려하여 재무적 특성과 이익조정 간의 관계를 실증적으로 검증하고자 하였다. 분석결과, 건설폐기물 기업의 사업규모가 클수록, 매출채권회수기간이 긴 기업일수록 실물활동에 의한 이익의 상향조정 의도가 강하게 나타났다. 건설폐기물 기업의 영업활동 현금창출능력이 부족할수록, 에비타마진율과 영업이익률의 차이가 산업평균비율의 차이보다 낮은 기업일수록 재량적 발생액과 실물활동에 의한 이익조정이 더욱 크게 나타났다. 이러한 재무적 특성과 이익조정 간의 유의한 관계는 중간 처분업의 특성인 수주능력, 중간처리능력, 보관능력 등에 따라 그 능력이 우수한 기업 및 열악한 기업별로 다른 행태를 보였다. 본 연구는 회계분야에서 연구되고 있는 재무적 특성과 이익조정 간의 관계에 대하여 건설폐기물산업으로 그 범위를 확대하였으며, 건설폐기물 기업의 이익조정이 재무적 특성에 따라 중간처분업의 고유한 특성을 반영하여 차별적으로 실행되고 있다는 실증결과를 제시하였다는 점에서 의미가 있다.

Maxillary Positioning Device for Intermediate Waferless Orthognathic Surgery

  • Lee, Jung-woo
    • Journal of International Society for Simulation Surgery
    • /
    • 제3권2호
    • /
    • pp.87-89
    • /
    • 2016
  • Le fort 1 osteotomy surgery is one of the most popular surgical methods for the treatment of patients with facial bone deformities. An intermediate wafer splint is used to fix the bone segment to the planned position, but there are many steps that can cause errors. To reduce these errors, we propose a method of using a surgical guide made with virtual surgical simulation.

7175 합금 단조재의 미세조직과 기계적 성질에 미치는 중간가공열처리 영향 (The Effect of Intermediate Thermo-Mechanical Treatment on the Microstructure and Mechanical Property of 7175 Al Alloy)

  • 이용연;송영범;;손영일;이경훈;은일상
    • 열처리공학회지
    • /
    • 제10권3호
    • /
    • pp.172-180
    • /
    • 1997
  • The microstructure, tensile and impact properties of forgings of 7175 aluminium alloy have been studied as a function of intermediate thermo-mechanical treatment(ITMT) process. The ITMT process is consisted of warm working and recrystallization. In the case that the billet was warm-worked above 60% below $250^{\circ}C$ and recrystallized at $475^{\circ}C$, the grain size revealed about $17{\mu}m$ which corresponds to one third of that of conventional process. The refinement of grain size leaded to the improved ductility and impact energy without sacrifice of tensile strength. It was found that the ITMT processed specimen behaved isotropically due to the near equiaxed grains. It was observed that the ITMT processed specimen showed the mixed fracture mode of transgranular and intergranular, instead of intergranular mode. This change of fracture mode contributed to the improved ductility and impact property.

  • PDF

소아에서 발생한 연구개 점액표피양 종양 1례 (Mucoepidermoid Carcinoma of the Soft Palate in a Child)

  • 정훈;은영규;권기환
    • 대한두경부종양학회지
    • /
    • 제24권2호
    • /
    • pp.207-210
    • /
    • 2008
  • The purpose of this paper is to review our experience with mucoepidermoid carcinoma(MEC), a rare tumour in minor salivary glands, in a paediatric patients. 15-year-old boy was noted to have a irregular round mass appearing atthe soft palate just to the right of the mid-line. A computed tomographic(CT) scan showed a palatal mass limited to soft palate with no bony erosion. The lesion was curetted and debulked. Pathology was reported as an intermediate-grade mucoepidermoid carcinoma, and the patient was considered to radiation therapy institution for further treatment. To date, patients remain free of disease. Wide local excision is the treatment of choice for low to intermediate grade MEC of the minor salivary glands in paediatric patients.

Al-Cu-Mg 합금에 있어서의 2차 결함조직 (The Secondary Defect Structure in Al-Cu-Mg Alloy)

  • 조현기;우기도
    • Applied Microscopy
    • /
    • 제16권2호
    • /
    • pp.14-24
    • /
    • 1986
  • The interrelation of secondary defects, intermediate S' phase and aging condition in Al-2.0 wt% Cu-1.1 wt% Mg alloy is studied by transmission electron microscope. The results obtained in this study are as follows. 1. High density of dislocation loops, helices and stacking faults are observed in this specimen with aging treatment. 2. The number of dislocation loops and the width of loop free zone (LFZ) are increased with aging time. 3. The intermediate S' phase precipitates and grows on the dislocations and secondary defects. 4. The misfit dislocations are formed around intermediate S' phase. 5. It is thought that the helices appear to be produced by the climb of screw dislocations, while the dislocation loops appear to be formed both by condensation of vacancies into collapsed discs and by interaction of helices with screw of opposite sign.

  • PDF

페라이트 스테인리스 강판의 집합조직과 성형성에 미치는 중간열처리의 영향 (Effect of Intermediate Annealing on the Texture and Formability in Ferritic Stainless Steel Sheet)

  • 조성윤;허무영
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2000년도 추계학술대회 논문집
    • /
    • pp.17-20
    • /
    • 2000
  • In order to improve the sheet formability of the ferritic stainless steel, the through-thickness textures of the recrystallized sample was modified by means of a thermomechanical treatment. An annealing process between the cold rolling reductions modified the preferred orientations throughout the thickness, which resulted in the modification of the final cold rolling texture as well as the final recrystallization texture. With the help of the modification of the recrystallization texture by the intermediate annealing, improvement of the sheet formability, i.e. an increase of the Lankford value.

  • PDF

Do Radiology Residents Perform Well in Preliminary Reporting of Emergency MRIs of Spine?

  • Lee, Joon Woo;Lee, Guen Young;CHONG, Le Roy;Kang, Heung Sik
    • Investigative Magnetic Resonance Imaging
    • /
    • 제22권1호
    • /
    • pp.10-17
    • /
    • 2018
  • Purpose: To evaluate interpretation errors involving spine MRIs by residents in their second to fourth year of training, classified as minor, intermediate and major discrepancies, as well as the types of commonly discordant lesions with or without clinical significance. Materials and Methods: A staff radiologist evaluated both preliminary and final reports of 582 spine MRIs performed in the emergency room from March 2011 to February 2013, involving (1) the incidence of report discrepancy, classified as minor if there was sufficient description of the main MR findings without ancillary or incidental lesions not influencing the main diagnosis, treatment, or patients' clinical course; intermediate if the correct diagnosis was made with insufficient or inadequate explanation, potentially influencing treatment or clinical course; and major if the discrepancy affected the main diagnosis; and (2) the common causes of discrepancy. We analyzed the differences in the incidence of discrepancy with respect to the training years of residents, age and sex of patients. Results: Interpretation discrepancy occurred in 229 of the 582 cases (229/582, 39.3%), including 146 minor (146/582, 25.1%), 40 intermediate (40/582, 6.9%), and 43 major cases (43/582, 7.4%). The common causes of major discrepancy were: over-diagnosis of fracture (n = 10), missed cord lesion (n = 9), missed signal abnormalities associated with diffuse marrow (n = 5), and failure to provide differential diagnosis of focal abnormal marrow signal intensity (n = 5). No significant difference was found in the incidence of minor, intermediate, and major discrepancies according to the levels of residency, patients' age or sex. Conclusion: A 7.4% rate of major discrepancies was found in preliminary reporting of emergency MRIs of spine interpreted by radiology residents, probably related to a relative lack of clinical experience, indicating the need for additional training, especially involving spine trauma, spinal cord and bone marrow lesions.