• Korean Journal of Metals and Materials
• /
• v.47 no.8
• /
• pp.482-487
• /
• 2009

In order to investigate the effects of intermediate heat treatment between cold rolling passes on the hardness and corrosion properties of a Zr alloy incorporating Nb (Zr-1.49Nb-0.38Sn-0.20Fe-0.11Cr) strip, three different intermediate heat treatment processes ($580^{\circ}C{\times}4hrs$, $600^{\circ}C{\times}2hrs$ and $620^{\circ}{\times}1hrs$) were designed based on a recrystallization map and an accumulated annealing parameter. Test samples from the different processes were investigated by a hardness test, corrosion test, and microstructure analysis and appropriate heat-treatment conditions were thereupon proposed. The sample subjected to an intermediate heat treatment of $580^{\circ}C{\times}4hrs$ was harder than that undergoing $600^{\circ}C{\times}2hrs$ and $620^{\circ}C{\times}1hr$ while the corrosion resistance of the sample that received an intermediate heat treatment of $580^{\circ}C{\times}4hrs$ was superior to that of the other specimens. Considering the trade-off of hardness and corrosion resistance, an intermediate heat treatment process of $600^{\circ}C{\times}2hrs$ is proposed to improve the manufacturing process of the alloy strip.

• Communications for Statistical Applications and Methods
• /
• v.15 no.5
• /
• pp.727-735
• /
• 2008

Consider a clinical trial in which the main end-point is survival. Suppose after the start of the study an intermediate event occurs which may be influenced by a covariate(or treatment). In many clinical studies the occurrence of an intermediate event may change the survival distribution. This investigation develops two-stage model which, in the first stage, models the effect of covariate on the intermediate event and models the relationship between survival time and covariate as well as the intermediate event. In this paper, the two-stage model is presented in order to model intermediate event and a test based on this model is also provided. A numerical simulations are carried out to evaluate its overall significance level.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.7-13
• /
• 2015

In this study, the effective treatment reducing geosmin and dosage of PAC was suggested when taste & odor compounds flow in. The removal efficiency of geosmin was evaluated with types of chlorination. In case of low geosmin concentration below 25 ng/L, removal efficiency of geosmin was estimated at 46% by combined treatment of pre and intermediate-chlorination. But, in the exclusive intermediate-chlorination treatment, removal efficiency of geosmin was increased to 57%. In the medium geosmin concentration (25~79 ng/L), removal efficiency of geosmin was estimated at 59% by combined treatment. But, in the exclusive intermediate-chlorination treatment, removal efficiency of geosmin was increased to 87%. When high geosmin concentration above 80 ng/L flows in, removal efficiency of geosmin was estimated at 69% by combined treatment. However, in the exclusive intermediate-chlorination treatment, removal efficiency of geosmin was increased to 95%. Then, the exclusive intermediate-chlorination has an important effect on removal of geosmin. After correlation of geosmin concentration and dosage of PAC was analyzed, the coefficient of determination was estimated at 0.96. And, the proper PAC dosage chart was proposed. Also, at a initial occurrence of geosmin, when the combined treatment by intermediate-chlorination and PAC was applied, particle-bound geosmin should be removed continuously. Finally, it is proved that the combined treatment was effective to remove the geosmin by threshold levels as well as to reduce the dosage of PAC.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.1
• /
• pp.37-41
• /
• 1991

In this study, the effect of solution treatment temperature on the tensile property in intermediate thermo-mechanical treated Al-Li alloys are investigated. After the intermediate thermo-mechanical treated Al-Li, Al-Li-Mg and Al-Li-Mg-Zr alloys were solution treated at various temperatures (500, 520 and $540^{\circ}C$), these were aged at $190^{\circ}C$, $240^{\circ}C$ and tested tensile properties. The results obtained from the experiment are as follows ; 1) The optimum solution heat-treatment temperature is $540^{\circ}C$ for a Al-Li alloy, and the recrystallized grain size is about $70{\mu}m$. 2) The optimum solution heat-treatment temperature is $500^{\circ}C$ for a Al-Li-Mg alloy, and the recrystallized grain size is the most coarse in all alloys. 3) The tensile property is independent of the solution treatment temperature in a Al-Li-Mg-Zr alloy, and the recrystallized grain size is the finest owing to addition of Zr.

• The Korean Journal of Ecology
• /
• v.21 no.3
• /
• pp.233-241
• /
• 1998

In order to test of intermediate disturbance hypothesis that an intermediate level of disturbance maximize biodiversity and to elucidate the effect of disturbance during the early old-field succession, the response of plant community along an experimental disturbance gradient was investigated in a five-year old-field. Response of plant community along an experimental disturbance gradient was connected with light condition because artificial disturbance gradient had been treat by clipping of plants and removing of litter. Artificial disturbance in five-year old-field plant community retarded rate of succession by increasing invasion and performance of the earlier successional species in the initial and middle stage of disturbance treatment. The species richness in the blocks of intermediate disturbance level showed the peak in early and mid-summer. This result did correspond with the prediction of intermediate disturbance hypothesis.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.909-914
• /
• 2011

An improved convergent and economical method has been developed for the synthesis of erlotinib, a 4-anilinoquinazoline and an EGFR-tyrosine kinase inhibitor for treatment of non-small-cell lung cancer. The final two steps for the formation of this 4-anilinoquinazoline from suitable 2-aminobenzonitrile intermediate and 3-ethynylaniline were modified and were performed in a simple one-pot reaction. The ring-closing mechanism for the formation of erlotinib from the suitable formamidine intermediate and 3-ethynylaniline was investigated and determined to proceed via the formation of phenyl benzamidine intermediate rather than involving Dimroth rearrangement reported earlier. The new benzamidine intermediate was isolated for the first time and characterized.

• Applied Microscopy
• /
• v.21 no.1
• /
• pp.46-62
• /
• 1991

The intermediate filament is one of the most important constituents of the intracytoplasmic cytoskeleton microtubule, actin, myosin and intermediate filament. It is composed of keratin, desmin, vimentin, neurofilament and glial filament, and has important role as a cellular marker, epithelial or mesenchymal origin. So it will be important to differentiated from some poorly or undifferentiated neoplasm to provide adequate therapeutic modalities. This study was performed by using immunohistochemical staining and electron microscopic observation to find out intermediate filaments of epithelial and non-epithelial tumor cells evaluate the degree of differentiation in tumors and therefore to provide some diagnostic and therapeutic modalities. The materials consisted of 83 epithelial and non-epithelial elements bearing 23 normal control, 28 epithelial tumors, and 32 non-epithelial tumors, that are resected for definite treatment at Chosun University Hospital from June, 1988 to June, 1990. Immunohistochemical stain for keratin, desmin and vimentin, and electron microscopic study were performed in all cases. The results obtained were as follows. 1. Immunohistochemical stain for intermediate filament were very useful diagnostic aid for differentiated epithelial tumor to non-epithelial tumor in diagnostic neoplasia. 2. In the electron microscopic finding, the size of intermediate filaments were possible differentiated to cell components of epithelial tumor and non-epithelial tumors.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.4
• /
• pp.9-16
• /
• 2023

In this study, the status and characteristics of fine dust and its impact on neighboring areas were investigated to proactively respond to the government's environmental regulations expected in the future and to minimize the damage by the fine dust generated at construction waste intermediate treatment plants. In addition, since there are no such plants that can affect the surroundings with no houses or other waste treatment sites nearby, an independently located construction waste intermediate treatment plant was selected to compare the characteristics of fine dust with that from the construction waste intermediate treatment sites located in the downtown area. The conclusions of the study are as follows. (1) The measurement results of PM10 at 4 points in the plant showed that the location where the crushing facility was operating had an elevated level of fine dust at 80㎍/m³ on average and a maximum of 124㎍/m³, and the level rose to 110㎍/m³ at points where vehicles frequent. (2) The PM2.5 measurement results inside the plant showed that the average concentration of the reference point was 16㎍/m³ and the maximum value was 20㎍/m³, which was distributed within the management standard. (3) It was found that the average concentration of PM10 in the nearby area ranged from 28 to 38㎍/m³, which was similar to or lower than 36㎍/m³ of the reference point. Therefore, the concentration of the fine dust generated in the plant had a negligible effect on the increase in concentration of fine dust in nearby areas. (4) The heavy metal contents were measured from the filter paper collected from the plant. The PM10 was found to be about 14 to 26ng/m³, and PM 2.5 was 25 to 28ng/m³, which was the average of domestic atmospheric concentrations. (5) The SEM-EDX analysis results showed that the PM10 contained Si and O around 40% similarly for both. The SiO2, a component of silica occupied the most and C was present as CaCO3, which was assumed to be a limestone component. The remaining components included NaO, Al2O3, and CaO as trace oxides. (6) The SEM-EDX analysis results showed that the PM 2.5 contained 5 to 7% of Cl, which is a chlorine ion, and a small amount of K was detected at 2.51% in the sample from the shutdown plant.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.284-289
• /
• 2022

This study was conducted to determine the seed dormancy types of Sambucus racemosa subsp. pendula Nakai and S. williamsii Hance. Low temperature stratification (1, 2, 3, 4 months) and GA3 treatment (1,000 mg/L) were performed on seeds to determine the type of seed dormancy. After the treatment, seeds were placed on a petri dish at 25℃ under light conditions. The germination rate and mean germination time were investigated. Results showed that cold stratification was effective in breaking the dormant state of the seed in both species. In the low temperature stratification treatment, the seed germination performance was improved as the treatment period was prolonged. Gibberellin treatment was effective in breaking the dormant state of S. racemosa subsp. pendula without low temperature stratification. However, S. williamsii did not break the dormant state of the seed by gibberellin treatment without low temperature stratification treatment. In the gibberellin treatment, germination performance was improved according to the low temperature stratification treatment period. As a result of this study, the seeds of S. williamsii have both an intermediate complex and a deep complex morphophysiological dormancy (MPD). In comparison, it was found that the S. racemosa subsp. pendula had intermediate composite MPD.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.357-360
• /
• 1997

Currently, there is a need for the development of an advanced new technology for Low-and Intermediate-Level Radioactive Waste (LILW) treatment from nuclear power plants. The vitrification and melting technology by the use of the electrical equipments such as induction heater and plasma torch based furnace, along with off-gas treatment are considered as the most promising one of the LILW treatment technology since they can produce a very stable waste forms as well as considerably large volume reduction, which is a world-wide trend to apply for radioactive waste treatment. Korea Electric Power Research Institute(KEPRI) has already completed a feasibility study on LILW treatment and conceptual system design of a demonstration plant to be constructed. For this research, KEPRI selected a cold crucible melter(CCM) for the vitrification of combustible waste, and plasma torch based furnace(PT) for the melting of noncombustible waste, along with off-gas treatment for the volatile radioisotopes such as cesium.