• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.167-175
• /
• 2019

To effectively deal with the fire in tunnel which is mostly the vehicle fire, it's more important to suppress the fire at early stage. In urban tunnel, however, accessibility to the scene of fire by the fire fighter is very limited due to severe traffic congestion which causes the difficulty with firefighting activity in timely manner and such a problem would be further worsened in underground road (double-deck tunnel) which has been increasingly extended and deepened. In preparation for the disaster in Korea, the range of life safety facilities for installation is defined based on category of the extension and fire protection referring to risk hazard index which is determined depending on tunnel length and conditions, and particularly to directly deal with the tunnel fire, fire extinguisher, indoor hydrant and sprinkler are designated as the mandatory facilities depending on category. But such fire extinguishing installations are found inappropriate functionally and technically and thus the measure to improve the system needs to be taken. Particularly in a double-deck tunnel which accommodates the traffic in both directions within a single tunnel of which section is divided by intermediate slab, the facility or the system which functions more rapidly and effectively is more than important. This study, thus, is intended to supplement the problems with existing tunnel life safety system (fire extinguishing) and develop the remote-controlled automatic fire extinguishing system which is optimized for a double-deck tunnel. Consequently, the system considering low floor height and extended length as well as indoor hydrant for a wide range of use have been developed together with the performance verification and the process for commercialization before applying to the tunnel is underway now.

• Korean Journal of Plant Resources
• /
• v.32 no.2
• /
• pp.124-143
• /
• 2019

This study was carried out to build a database system for amylose and protein contents of rice germplasm based on NIRS (Near-Infrared Reflectance Spectroscopy) analysis data. The average waxy type amylose contents was 8.7% in landrace, variety and weed type, whereas 10.3% in breeding line. In common rice, the average amylose contents was 22.3% for landrace, 22.7% for variety, 23.6% for weed type and 24.2% for breeding line. Waxy type resources comprised of 5% of the total germplasm collections, whereas low, intermediate and high amylose content resources share 5.5%, 20.5% and 69.0% of total germplasm collections, respectively. The average percent of protein contents was 8.2 for landrace, 8.0 for variety, and 7.9 for weed type and breeding line. The average Variability Index Value was 0.62 in waxy rice, 0.80 in common rice, and 0.51 in protein contents. The accession ratio in arbitrary ranges of landrace was 0.45 in amylose contents ranging from 6.4 to 8.7%, and 0.26 in protein ranging from 7.3 to 8.2%. In the variety, it was 0.32 in amylose ranging from 20.1 to 22.7%, and 0.51 in protein ranging from 6.1 to 8.3%. And also, weed type was 0.67 in amylose ranging from 6.6 to 9.7%, and 0.33 in protein ranging from 7.0 to 7.9%, whereas, in breeding line it was 0.47 in amylose ranging from 10.0 to 12.0%, and 0.26 in protein ranging from 7.0 to 7.9%. These results could be helpful to build database programming system for germplasm management.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• Clean Technology
• /
• v.16 no.3
• /
• pp.198-205
• /
• 2010

Two sets of thermal reaction experiment for chlorinated hydrocarbons were performed using an isothermal tubular-flow reactor in order to investigate thermal decomposition, including product distribution of chlorinated hydrocarbons. The effects of $H_2$ or Ar as the reaction atmosphere on the thermal decomposition and product distribution for dichloromethane($CH_2Cl_2$) was examined. The experimental results showed that higher conversion of $CH_2Cl_2$ was obtained under $H_2$ atmosphere than under Ar atmosphere. This phenomenon indicates that reactive-gas $H_2$ reaction atmosphere was found to accelerate $CH_2Cl_2$ decomposition. The $H_2$ plays a key role in acceleration of $CH_2Cl_2$ decomposition and formation of dechlorinated light hydrocarbons, while reducing PAH and soot formation through hydrodechlorination process. It was also observed that $CH_3Cl,\;CH_4,\;C_2H_6,\;C_2H_4$ and HCl in $CH_2Cl_2/H_2$ reaction system were the major products with some minor products including chloroethylenes. The $CH_2Cl_2$/Ar reaction system gives poor carbon material balance above reaction temperature of $750^{\circ}C$. Chloroethylenes and soot were found to be the major products and small amounts of $CH_3Cl$ and $C_2H_2$ were formed above $750^{\circ}C$ in $CH_2Cl_2$/Ar. The thermal decomposition reactions of chloroform($CHCl_3$) with argon reaction atmosphere in the absence or the presence of $CH_4$ were carried out using the same tubular flow reactor. The slower $CH_3Cl$ decay occurred when $CH_4$ was added to $CH_3Cl$/Ar reaction system. This is because :$CCl_2$ diradicals that had been produced from $CHCl_3$ unimolecular dissociation reacted with $CH_4$. It appears that the added $CH_4$ worked as the :$CCl_2$ scavenger in the $CHCl_3$ decomposition process. The product distributions for $CHCl_3$ pyrolysis under argon bath gas were distinctly different for the two cases: one with $CH_4$ and the other without $CH_4$. The important pyrolytic reaction pathways to describe the important features of reagent decay and intermediate product distributions, based upon thermochemistry and kinetic principles, were proposed in this study.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.137-159
• /
• 2017

This study divides manufacturing in 18 countries including Korea, China, Japan and OECD countries into 11 areas and estimates and compares the technological efficiency of each industry. The traditional view of productivity is to increase production capacity through technological innovation or process innovation, but it is also influenced by the technological efficiency of production process. A Stochastic Frontier Production Model (SFM) is a representative method for estimating the technical efficiency of such production. First, as a result of estimating the production function by setting the output variable as total output or value-added, in both cases, the output increased significantly in all manufacturing sectors as inputs of labor, capital, and intermediate increased. On the other hand, R&D investment has a large impact on output in chemical, electronics, and machinery industries. Next, as a result of estimating the technological efficiency through the production function, when the total output is set as the output variable, the overall average of each sector is 0.8 or more, showing mostly high efficiency. However, when value-added was set, Japan had the highest level in most manufacturing sectors, while other countries were lower than the efficiency of the total output. Comparing the three countries of Korea, China and Japan, Japan showed the highest efficiency in most manufacturing sectors, and Korea was about half or one third of Japan and China was lower than Korea. However, in the food and electronics sectors, China is higher than Korea, indicating that China's production efficiency has greatly improved. As such, Korea is not able to narrow its gap with Japan relatively faster than China's rapid growth. Therefore, various policy supports are needed to promote technology development. In addition, in order to improve manufacturing productivity, it is necessary to shift to an economic structure that can raise technological efficiency as well as technology development.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.297-306
• /
• 2023

Saemangeum Lake is the largest artificial lake in Korea. The continuous deterioration of lake water quality necessitates the introduction of novel water quality management strategies. Therefore, this study aims to identify the spatiotemporal water quality characteristics of Saemangeum Lake using data from the National Water Quality Measurement Network and provide basic information for water quality management. In the water quality parameters of Saemangeum Lake, water temperature and total phosphorous content were correlated, and salt, total nitrogen content, pH, and chemical oxygen demand were significantly correlated. Other parameters showed a low correlation. The spatial principal component analysis of Saemangeum Lake showed the characteristics of its four zones. The mid-to-downstream section of the river affected by freshwater inflow showed a high nutrient salt concentration, and the deep-water section of the drainage gate and the lake affected by seawater showed a high salt concentration. Two types of water qualities were observed in the intermediate water area where river water and outer sea water were mixed: waters with relatively low salt and high chemical oxygen demand, and waters with relatively low salt and high pH concentration. In the principal component analysis by time, the water quality was divided into four groups based on the observation month. Group I occurred during May and June in late spring and early summer, Group II was in early spring (March-April) and late autumn (November-December), Group III was in winter (January-February), and Group IV was in summer (July-October) during high temperatures. The water quality characteristics of Saemangeum Lake were found to be affected by the inflow of the upper Mangyeong and Dongjin rivers, and the seawater through the Garuk and Shinshi gates installed in the Saemangeum Embankment. In order to achieve the target water quality of Saemangeum Lake, it is necessary to establish water quality management measures for Saemangeum Lake along with pollution source management measures in the upper basin.

• Journal of Chest Surgery
• /
• v.41 no.3
• /
• pp.320-328
• /
• 2008

Background: Numerous surgical devices for mitral repair have been used in the past with good results. In this study we describe a simple annuloplasty technique with using a new device ($Mitracon^{(R)}$). The aim of this study was to assess its efficacy and surgical results with using $Mitracon^{(R)}$. Material and Method: From May 2003 to October 2005, 46 patients (21 women and 25 men (mean age of $51.4{\pm}17.8$ years) with mitral regurgitation from various causes were treated with either the $Mitracon^{(R)}$ (the $Mitracon^{(R)}$ group) or the Capentier Edward rigid ring (the CE group). The median follow-up duration was 18.9 months. Result: The mean grade of mitral regurgitation before and immediately after surgery in the $Mitracon^{(R)}$ group and the CE group decreased from $3.2{\pm}0.8$ to $0.6{\pm}0.7$ and $3.4{\pm}0.7$ to $0.3{\pm}0.5$, respectively. There were no significant changes in the ejection fraction either between the two groups or before and immediately after surgery. No deaths were seen in either group. Early postoperative echocardiography of all 46 patients showed only trivial mitral regurgitation or none at all. Echocardiography at a median of 18.9 months also showed no progression in mitral regurgitation. The mean grade of mitral regurgitation in the $Mitracon^{(R)}$ group at this time point decreased from $3.2{\pm}0.8$ to $0.8{\pm}0.7$ (p<0.05). The CE group also showed a similar degree of decrease from $3.4{\pm}0.7$ to $0.3{\pm}0.6$ (p<0.05). The mitral valve area in the $Mitracon^{(R)}$ group at 1 year follow-up was $3.3{\pm}0.9cm^2$. The mitral valve area in the CE group was $2.7{\pm}0.6cm^2$. The mean mitral pressure gradient in the $Mitracon^{(R)}$ group at 1 year follow-up was $3.1{\pm}1.3$ mmHg. The mean pressure gradient in the CE group was $4.5{\pm}2.1$ mmHg, although any statistical significant difference for this between the groups was not reached. Conclusion: The present study showed the described technique to be safe and effective in the intermediate term. Because long term results are unavailable, a more extensive prospective randomized multicenter trial may be warranted to determine whether this procedure should be generally applied for repair of mitral valve disease.

• Cartoon and Animation Studies
• /
• s.37
• /
• pp.361-392
• /
• 2014

Regarding works that express objects realistically in painting, Gustave Courbet advocated realism in the mid-19th century, France, resisting the then academist style of painting, and works in realist style were produced in earnest by painters such as H. Daumier or Jean F. Millet, who went along with him. Later, realism has expanded into the realm of general literature, including fine art, which has had profound impacts on works of art and literary works. In comics, too, in the same historical context as a form of painting, realistic comics began to be produced by painters or cartoonists at the time. These realism comics are those dealing with stories based on facts, and in terms of contents, objective description and representation of the social realities of the times is one of the most important objectives, but it could not be concluded that in their visual aspect, that is, that of expressing the objects, they were realistic. In the meantime, a graphic novel was born, which was the intermediate form between comics and novels around the United States and Europe since the 1980s. Graphic novels appeared in forms and styles with strong literary and artistic values in the comics market in the U.S. which was full of the superhero genre (comics around heroes), and their major characteristics are very realistic expressions in terms of contents and visual aspect. They are complex and delicate and even have artistic, literary values as if readers read a fiction or literary work of which its narrative structures or pictures are produced with graphics. The characteristics of realistic expressions shown in graphic novels are very different from the previous works of comics. It is noteworthy that they began to be acknowledged as works of art like painting or illustration, thanks to their features of strongly individual auteurist painting style, a fairly high degree of completion of the works, and creative and experimental expression techniques or methods, instead of following the fashion of the times. In recent years, in South Korea, Hollywood blockbuster films have been released one after another and become box office hits, there are increasing interest and demand for the original graphic novels. Accordingly, many original graphic novels have been translated and started to be sold, and keeping pace with this global flow of fashion, some writers in Korea began to produce works of graphic novels. However, to look into the domestic works produced claiming to be graphic novels, there are various opinions on their format and authenticity. In this sense, this study focused on Ga-ya Kwon's Namhansanseong, one the representative works of Korean style graphic novels, and in particular, it attempted to analyze their characteristics and commonalities focusing on the visual aspect of realistic expressions of objects. It is expected that there would be an opportunity to seek for ways so that Korean style graphic novel can be further developed as a genre of comics, with competitiveness by looking back on the identity and present state of domestic graphic novels and developing and applying Korea's original subject matters differentiated from those of graphic novels in the U.S., Europe or Japan through this study. In addition, it is desired that they will be a new energizer for the stagnant domestic comics market.

• Pediatric Infection and Vaccine
• /
• v.10 no.2
• /
• pp.167-177
• /
• 2003

Purpose : To know the trends of antimicrobial susceptibility is critical for antimicrobial treatment. We studied the organisms isolated from blood, urine, stool, and cerebrospinal fluid from 1997 to 2001 to reveal the trends of their antimicrobial susceptibility. Methods : We conducted a retrospective study with isolates obtained from 0~18 year old outpatients and inpatients from 1997 to 2001 at Department of Pediatrics, Hanil general hospital. We gathered the data through the laboratory test files and the origin of microorganisms cultured from blood, urine, stool and cerebrospinal fluid and their antimicrobial susceptibility. Results : Microorganisms were isolated from 226(3.3%) out of 6,974 blood cultures, 365 (8.0%) out of 4,549 urine cultures, 50(1.9%) out of 2,593 stool cultures and 9(1.4%) in 655 cerebrospinal fluid cultures. The most frequently isolated organisms from blood cultures was Staphylococcus epidermidis(33.5%) which was followed by Staphylococcus aureus(19.7%), Escherichia coli(13.8%), and Burkholderia cepacia(9.0%). Among the urine cultures, E. coli was the most common(74.7%) which was followed by Group D Enterococcus(11.3%), Klebsiella pneumoniae(7.1%) and Proteus mirabilis(2.5%). The positive stool cultures all yield Salmonella species. Group D Salmonella was obtained most frequently. Among the positive cerebrospinal fluid cultures, Group B Streptococcus was isolated most frequently. Among the 40 cases of S. aureus in blood cultures, 27 cases were methicillin-resistant. The rates of susceptibility for amikacin, ceftizoxime and ceftriaxone of E. coli isolated from blood cultures were 80%, 100% and 60% in 1997 and 60%, 80% and 60% in 2001. The rates of susceptibility for amikacin, ceftizoxime and ceftriaxone of K. pnumoniae isolated from urine cultures. were 80%, 100% and 80% in 1997 and 50%, 83% and 50% in 2001 Enterococcus was isolated from 6.7% to 15.8% and vancomycin-resistant Enterococcus was observed in 17% of Group D Enterococcus isolated from urine cultures. The rates of susceptibility for amikacin, ceftizoxime and ceftriaxone of Group D Salmonella were 96%, 96% and 92% during the study period. Conclusion : Among the blood cultures S. epidermidis, S. aureus, E. coli and B. cepacia were isolated in order of frequency and among the urine cultures E. coli, Group D Enterococcus, K. pneumoniae and P. mirabilis were isolated in order of frequency. During the study period there was no big difference in major organisms isolated from blood and urine. The methicillin-resistant S. aureus was observed in 67% of S. aureus isolated from blood cultures but vancomycin-reistant S. aureus or vancomycin intermediate resistant S. aureus was not observed. The rates of susceptibility to amikacin and the third generation cephalosporin of E. coli isolated from blood cultures and K. pneumoniae from urine cultures have decreased. The isolation rates of Group D Enterococcus and vancomycin resistant Enterococcus have increased.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.2
• /
• pp.81-94
• /
• 1971

This research is conducted to study the effect to rebbuding, death atop, yielding and occurrence of twig blight disease with the interemediate cutting periods of mulberry branch and at the picking levels of leaf remains in autumn. The results obtained are as follows: 1. Re-budding branches are decreased with delaying of interval cutting period, and that more leaves remained lesser both re-budding branches and buds are observed. Therefore, it is better that leaves remained are placed on the upper part of branch, practically with 3-5 leaf remains. It has decreased re-budding branches, in case cutting is conducted in Sept. 20 with picking leaving 3-5 leaf on. 2. With regard that all picking increases the percentage of death atop of the branch and upper half part picking increases slightly over the other treats. Although it seems unlikely to be different in the other treats with cutting period, exception of all picking, it is elucidated better that the all picking after cutting in Sept. 15 represents unusually high, seemingly effected by the temperature contition preferable to the life of twig blight disease along with the lack of branch nutrition caused by the all picking. 3. In view of yielding, it has no difference in autumn yielding with cutting period, but more picking levels of leaf remains, more yielding. In spring yield, both no picking and all picking is the lowest, in spite of cutting period. Each treat produces high yielding except the no picking if rutting is done in Sept. 15 and Sept. 20, respectively; otherwise it is done earlier or later, each treat produces low yielding. It is suggested that yielding ability in following spring affected by the autumn picking because all picking treats represent lower yielding ability than no picking ones except of cutting in Sept. 15 and Sept. 20. With respect to total yield in spring and autumn, it is represented that other treats, among which cutting in Sept. 15 and Sept. 20 is especially high, produce higher yielding than both no picking and all picking. But no difference seemed in leaf remained treats. In these respects, it may be concluded that 3-5 leaf remains after the interval cutting in Sept. 15 to Sept. 20 increases the yielding throughout two seasons and it is suggested that 3-5 leaf remains after cutting in Sept. 5 to Sept. 10 has no difference with no picking and cutting after that day. 4. Diseases in the branch remained are twig blight, massaria-bye, and Die-back, of which twig blight attacks tremendously and slight ouurence in messaria-byo and Die-back. In ouurence of twig blight, it is appeared much in all picking and seasonal occurence high in Sept. 15 with 92.9, and in Sept. 30 with 100 as index, respectively. Also it occurs ,considerably in upper part picking but little occurrence in no picing. 5. It is considered that negative correlation among re-budding percentage. No. of re-budding leaf, and spring yielding is found, seemingly without heavy correlation at -0.42, and -0.27, respectively. However, death atop of branch and occurence of twig blight has little correlation with spring yield. On the other hand, positive correlation highly appeared with the correlation coefficient at 0.8 between occurence of twig blight and death atop of branch.