• 제목/요약/키워드: Intermediate depth

검색결과 262건 처리시간 0.022초

A Method for Surface Reconstruction and Synthesizing Intermediate Images for Multi-viewpoint 3-D Displays

  • Fujii, Mahito;Ito, Takayuki;Miyake, Sei
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 1996년도 Proceedings International Workshop on New Video Media Technology
    • /
    • pp.35-40
    • /
    • 1996
  • In this paper, a method for 3-D surface reconstruction with two real cameras is presented. The method, which combines the extraction of binocular disparity and its interpolation can be applied to the synthesis of images from virtual viewpoints. The synthesized virtual images are as natural as the real images even when we observe the images as stereoscopic images. The method opens up many applications, such as synthesizing input images for multi-viewpoint 3-D displays, enhancing the depth impression in 2-D images and so on. We also have developed a video-rate stereo machine able to obtain binocular disparity in 1/30 sec with two cameras. We show the performance of the machine.

  • PDF

CTD Data Processing for CREAMS Expeditions: Thermal-lag Correction of Sea-Bird CTD

  • Kim, Kuh;Cho, Yang-Ki;Ossi, Hyong;Kim, Young-Gyu
    • Journal of the korean society of oceanography
    • /
    • 제35권4호
    • /
    • pp.192-199
    • /
    • 2000
  • Standard CTD data processing recommended by Sea-Bird Electronics produced thermal-lag corrections larger than 0.1 psu for the data taken during the CREAMS expeditions in the northern part of the East/Japan Sea where a vertical temperature gradient frequently exceeds 1.0$^{\circ}$C/m in the upper 100 m near the sea surface. As the standard processing is based upon a recursive filter which was introduced by Lueck and Pickle (1990), coefficients of the recursive filter have been newly derived for the CREAMS data by minimizing the difference between salinities of downcast and upcast in temperature-salinity domain. The new coefficients are validated by comparison with salinities measured by a salinometer, AUTOSAL 8400B. An accurate correction for the thermal-lag is critical in identifying water masses at intermediate depth in the East/japan Sea.

  • PDF

지오텍스타일로 보강된 농업용 저수지 제체의 붕괴거동 (Behavior of Failure of Agricultural Reservoirs Embankment Reinforced by Geotextile under Overtopping Condition)

  • 이달원;노재진
    • 한국농공학회논문집
    • /
    • 제56권2호
    • /
    • pp.59-64
    • /
    • 2014
  • In this study, the large scale test was performed to investigate the behavior of failure for the embankment and spillway transitional zone by overtopping. The pore water pressure, earth pressure, settlement and failure pattern of covering embankment with geotextile were compared and analyzed. The pore water pressure showed a small change in the spillway transition zone and core, indicating that the geotextile efficiently reinforced the embankment. The earth pressure decreased the infiltration of the pore water only in inclined cores type to secure local stability. The behavior of failure started from the bottom and gradually progressed upwards. After the intermediate overtopping period (100 min), width and depth of the seepage erosion were very small due to the effect of geotextile which delayed failure. Therefore, the reinforced method by geotxtile was a very effective method to respond to the emergency due to overtopping.

p-InP의 저항성 합금 접촉 특성 연구 (The Properties of Alloyed Ohmic Contact to p-InP)

  • 이중기;박경현;한정희;이용탁
    • 대한전자공학회논문지
    • /
    • 제27권4호
    • /
    • pp.555-562
    • /
    • 1990
  • Alloyed ohmic contact properties of Au-Zn/Au, Au-Be/Au,Au-Zn/Cr/Au, and Au-Be/Cr/Au metal system to p-InP were investigated. Optimum alloying conditions were obtained at the annealing temperature of 425\ulcorner for all the metal systems using a rapid thermal annealing system. Surface AES analysis and auger depth profiling were done for each metal system annealed at the optimum conditions. Outdiffusions of In and P from the InP substrate were found in the metal systems without Cr intermediate layer. Also, small amount of In. P and Cr were detected at the surface in the case of Au-Zn/Cr/Au system, while there were occured no outdiffusion of In, P, and Cr for Au-Be/Cr/Au system. The best surface morpholoty and specific contact resistivity of 4.5x 10**-5 \ulcornercm\ulcornerhave been obtained in this Au-Be/Cr/Au material system alloyed at 425\ulcorner for 60 second.

  • PDF

접합모형을 이용한 경년 및 계절안 진동 모사실험 연구 (On the Study of Intraseasonal and Interannual Oscillations Simulation by using Coupled Model)

  • 안중배
    • 한국환경과학회지
    • /
    • 제8권6호
    • /
    • pp.645-652
    • /
    • 1999
  • In order to simulate and investigate the major characteristics of El Nino/Southern Oscillation(ENSO) and Madden Jullian Oscillation(MJO), an intermediate type atmosphere-ocean coupled model is developed and their results are examined. The atmosphere model is a time-dependent non-linear perturbation moist model which can determine the internal heating for itself. The counterpart of the atmosphere model is GCM-type tropical ocean model which has fine horizontal and vertical grid resolutions. In the coupled experiment, warm SST anomaly and increased precipitation and eastward wind and current anomalies associated with ENSO and MJO are properly simulated in Pacific and Indian Oceans. In spite of some discrepancies in simulation MJO, the observed atmospheric and oceanic low-frequency characteristics in the tropics are successfully identified. Among them, positive SST anomalies centered at the 100m-depth of tropical eastern-central Pacific due to the eastward advection of warm water and reduced equatorial upwelling, and negative anomalies in the Indian and western Pacific seem to be the fundamental features of tropical low-frequency oscillations.

  • PDF

A comparison study of approximate and Monte Carlo radiative transfer methods for late type galaxy models

  • Lee, Dukhang;Baes, Maarten;Seon, Kwang-il
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.49.3-50
    • /
    • 2016
  • Two major radiative transfer (RT) techniques have been developted to model late-type galaxies: approximate RT and Monte Carlo (MC) RT. In the approximate RT, first proposed by Kylafis & Bahcall, only two terms of unscattered (direct) and single-scattered intensities are computed and higher-order multiple scattering components are approximated, saving computing time and cost compared to MC RT. However, the approximate RT can yield errors in regions where multiple scattering effect is significant. In order to examine how significant the errors of the approximate RT are, we compare results of the approximate RT with those of SKIRT, a state-of-the-art MC RT code, which is basically free from the approximation errors by fully incorporating all the multiple scattered intensities. In this study, we present quantitative errors in the approximate RT for late type galaxy models with various optical depths and inclination angles. We report that the approximate RT is not reliable if the central face-on optical depth is intermediate or high (${\tau}_V$ > 3).

  • PDF

A Viterbi Decoder with Efficient Memory Management

  • Lee, Chan-Ho
    • ETRI Journal
    • /
    • 제26권1호
    • /
    • pp.21-26
    • /
    • 2004
  • This paper proposes a new architecture for a Viterbi decoder with an efficient memory management scheme. The trace-back operation is eliminated in the architecture and the memory storing intermediate decision information can be removed. The elimination of the trace-back operation also reduces the number of operation cycles needed to determine decision bits. The memory size of the proposed scheme is reduced to 1/($5{\times}$ constraint length) of that of the register exchange scheme, and the throughput is increased up to twice that of the trace-back scheme. A Viterbi decoder complying with the IS-95 reverse link specification is designed to verify the proposed architecture. The decoder has a code rate of 1/3, a constraint length of 9, and a trace-forward depth of 45.

  • PDF

Prediction of engineering demand parameters for RC wall structures

  • Pavel, Florin;Pricopie, Andrei
    • Structural Engineering and Mechanics
    • /
    • 제54권4호
    • /
    • pp.741-754
    • /
    • 2015
  • This study evaluates prediction models for three EDPs (engineering demand parameters) using data from three symmetrical structures with RC walls designed according to the currently enforced Romanian seismic design code P100-1/2013. The three analyzed EDPs are: the maximum interstorey drift, the maximum top displacement and the maximum shear force at the base of the RC walls. The strong ground motions used in this study consist of three pairs of recordings from the Vrancea intermediate-depth earthquakes of 1977, 1986 and 1990, as well as two other pairs of recordings from significant earthquakes in Turkey and Greece (Erzincan and Aigion). The five pairs of recordings are rotated in a clockwise direction and the values of the EDPs are recorded. Finally, the relation between various IMs (intensity measures) of the strong ground motion records and the EDPs is studied and two prediction models for EDPs are also evaluated using the analysis of residuals.

Comparison of morphological characteristics of the river puffer, Takifugu obscurus, the tiger puffer, T. rubripes, their hybrids, and their triploid hybrids

  • Park, In-Seok;Oh, Ji Su
    • 환경생물
    • /
    • 제39권1호
    • /
    • pp.6-15
    • /
    • 2021
  • Various biometric and geometric measures were used to discriminate between the morphologically similar river puffer, Takifugu obscurus, tiger puffer, T. rubripes, their hybrids, and their triploid hybrids. The hybrids and triploid hybrids had greater anal fin width, nostril width, and snout length than the parental species (p<0.05). However, they had less caudal peduncle depth, inter-orbital width, head length, and head width(p<0.05). The morphometric and meristic characteristics of the hybrids and triploid hybrids were either intermediate between the parental species or more similar to those of one parental species. However, the external morphology of the hybrids and triploid hybrids was predominantly maternal. The triploid hybrids had asymmetry in the fin rays and gill raker numbers. This study identified phenotypic characteristics by distinguishing the morphological variables of river puffer, tiger puffer, their hybrids, and their triploid hybrids.

물이끼섬을 포함하는 제주도 오미 습원의 군락생태 (A Synecological Description of Ohmi Moor with Sphagnum Islet in Jeju, Korea)

  • 김종원;이경연;김윤하;엄병철
    • 생태와환경
    • /
    • 제51권2호
    • /
    • pp.174-183
    • /
    • 2018
  • 제주도 숨은물벵뒤 습지보호지역 내에는 야생 동물과 탈출 가축을 부양하는 작고 얕은 못, 이른바 오미가 있다. 본 연구는 숨은물벵뒤 오미 식물군락의 다양성과 그 분포를 밝힌다. 오미의 크기는 매우 작지만, 미소서식처 환경조건에 대응하는 여섯 가지 식물사회를 정교하게 기재하였다: 이탄소도-보그식생형의 물이끼류군락, 원수대 부엽식생형의 좀어리연꽃군락, 연안대 정수식생형의 송이고랭이군락과 좀올챙이골군락, 연안대 순간식생형의 바늘골-진땅고추풀군락과 검은곡정초-개수염군락. 이들 식물군락은 수심에 따라 대상분포하였다. 고층습원의 전형요소 물이끼섬이 오미 중앙에 발달하고 있음이 국내에서 처음으로 밝혀졌다. 오미습원은 '빗물의존 약한 빈영양 환경'을 갖는 하나의 독특한 중간습원으로 숨은물벵뒤 습지보호지역 속에서 높은 자연성을 갖는 핵심서식처로 평가되었다.