• Transactions of Materials Processing
• /
• v.24 no.1
• /
• pp.37-43
• /
• 2015

The purpose of the current study is to improve the clinching joint strength of aluminum and fiber metal laminates (FMLs) comprised of three layers. The joining of FML and Al 5052 by a conventional clinching joint has some disadvantages such as necking of the upper sheet, lack of interlocking, defects caused by the vertical load, and especially loss of strength of the composite material due to the low ductility. In the current study, a tapered-hole clinching method is proposed as an alternative for the joining of Al 5052 and FMLs. A hole with a tapered shape is formed before the joining process. The design parameters were evaluated using the Taguchi method for the geometry of the tapered hole in order to determine the maximum separation load. The diameter of the punch corner, clearance, punch stroke and the tapered length were used as the main variables in the Taguchi method. In conclusion, the contribution ratio for each of the fours variable examined was 35.07%, 22.44%, 21.32% and 14.11%, respectively. In addition, the appropriate combination of the design parameters can make a 5% improvement in the vertical direction joint strength.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.47-55
• /
• 2012

This paper investigates the shear properties of crumb rubber-bottom ash mixture reinforced by waste fishing net (WFN). Mixtures used in this experiment consist of crumb rubber and bottom ash (2mm~10mm) with the same weight ratio. In this study several series of direct shear tests were carried out on the five different specimens : unreinforced mixture, reinforced mixtures with 1 or 2 single-layered WFN, reinforced mixtures with 1 or 2 double-layered WFN. The experimental results indicated that the shear properties of reinforced crumb rubber-bottom ash mixture were strongly influenced by reinforcing layer of WFN. It was found that the shear strength and internal friction angle of the mixtures increased with an increase in reinforcing layer of WFN due to interlocking effect and friction between mixture and WFN.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.9
• /
• pp.81-91
• /
• 2013

This paper investigates the shear properties of bottom ash-crumb rubber mixture reinforced with waste fishing net. Mixtures used in this experiment were prepared at 2 different percentages of crumb rubber (2 mm~10 mm) content (i.e., 0%, 50% by weight of the dry bottom ash). In this study several series of triaxial tests were carried out on the six different specimens : unreinforced bottom ash, reinforced bottom ash with 1 or 2 layers, unreinforced mixture, reinforced mixture with 1 or 2 layers. The experimental results indicated that the shear properties of bottom ash-crumb rubber mixture were strongly influenced by reinforcing layer of waste fishing net and crumb rubber addition. It is shown that the internal friction angle of bottom ash-crumb rubber mixture decrease with addition of crumb rubber due to the compression properties of crumb rubber. However, the internal friction angle of the mixture increased with an increase in reinforcing layer due to interlocking effect and friction between mixture and waste fishing net.

• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.13-22
• /
• 2010

The unique features of spark plasma sintering process are the possibilities of a very fast heating rate and a short holding time to obtain fully dense materials. $\beta$-SiC powder with 0, 2, 6, 10 wt% of $\alpha$-SiC particles (seeds) and 4 wt% of Al-B-C (sintering aids) were spark plasma sintered at $1700-1850^{\circ}C$ for 10 min. The heating rate, applied pressure and sintering atmosphere were kept at $100^{\circ}C/min$, 40 MPa and a flowing Ar gas (500 CC/min). Microstructural development of SiC as function of seed content and temperature during spark plasma sintering was investigated quantitatively and statistically using image analysis. Quantitative image analyses on the sintered SiC ceramics were conducted on the grain size, aspect ratio and grain size distribution of SiC. The microstructure of SiC sintered up to $1700^{\circ}C$ consisted of equiaxed grains. In contrast, the growth of large elongated SiC grains in small matrix grains was shown in sintered bodies at $1750^{\circ}C$ and the plate-like grains interlocking microstructure had been developed by increasing sintering temperature. The introduction of $\alpha$-SiC seeds into $\beta$-SiC accelerated the grain growth of elongated grains during sintering, resulting in the plate-like grains interlocking microstructure. In the $\alpha$-SiC seeds added in $\beta$-SiC, the rate of grain growth decreased with $\alpha$-SiC seed content, however, bulk density and aspect ratio of grains in sintered body increased.

• Journal of Adhesion and Interface
• /
• v.15 no.2
• /
• pp.49-56
• /
• 2014

In this study, properties of adhesion between adhesion promoter-containing rubber compound and zinc coated steel cord was investigated. Cobalt salt, resorcinol formaldehyde resin (RF resin) and hexamethoxymethylmelamine (HMMM) were used to adhesion promoter. Since cobalt salts accelerate sulphidation rate of zinc at zinc coated steel cord surface, pullout force of rubber compound applying cobalt salts was increased compared to that of rubber compound without applying cobalt salts. Pullout force and rubber coverage of rubber compounds applying all adhesion promoters were superior because strong interlocking between rubber matrix increased modulus due to applying RF resin and HMMM and grown zinc sulfides at zinc coated steel cord surface.

• Convergence Security Journal
• /
• v.19 no.2
• /
• pp.83-89
• /
• 2019

In accordance with information security compliance and security regulations, there is a need to develop regular and real-time concepts for cyber-infringement attacks against network system vulnerabilities in branch and periodic forms. Vulnerability Analysis Analysis It is judged that it will be a countermeasure against new hacking attack in case of concept validation by interworking with TOOL. Vulnerability check module is standardized in event attribute management and ease of operation. Opening in terms of global sharing of vulnerability data, owasp zap / Angry ip Etc. were investigated in the SIEM system with interlocking design implementation method. As a result, it was proved that the inspection events were monitored and transmitted to the SIEM console by the vulnerability module of web and network target. In consideration of this, ESM And SIEM system In this paper, we propose a new vulnerability analysis method based on the existing information security consultation and the results of applying this study. Refer to the integrated interrelationship analysis and reference Vulnerability target Goal Hacking It is judged to be a new active concept against invasion attack.

• Journal of Veterinary Clinics
• /
• v.39 no.6
• /
• pp.353-359
• /
• 2022

Several suture patterns can be used for cystotomy closure, and a continuous suture pattern is the most commonly used. In this study, the fluid-tight ability and other suitabilities of continuous appositional sutures, such as the simple continuous suture pattern (SC), running suture pattern (RN), and Ford interlocking suture pattern (FI), were compared for cystotomy closure. Cystotomy closure was performed using each suture method in 10 cases of ex vivo swine bladders in each group. Suture time, leakage site, suture length, bursting pressure (BP), bursting volume (BV), and circular bursting wall tension (CBWT) were measured. Suture time and suture length were the shortest in RN and the longest in FI. Leakage occurred in two places: the incision line directly and the hole made by the suture. Leakage occurred through the incision line in 4 bladders of the RN group and 2 bladders of the FI group, but not in the SC group, and in the rest of the bladders, leakage occurred through the suture hole. The values of BP, BV, and CBWT increased in the order of FI, SC, and RN. Suture time and suture length can be considered as factors related to healing and side effects. In this study, leakage through the incision was found in a less appositional area; therefore, leakage through the hole could be considered an indicator of better apposition. Good apposition is one of the conditions required for ideal cystotomy closure. The bursting strength representing the fluid-tight ability can be expressed as the CBWT. RN is expected to be efficient and cause a small degree of foreign body reaction; however, it is expected to be less stable. FI has the greatest fluid-tightness ability, but it has been proposed that side effects due to foreign body reactions most frequently occur in FI. In conclusion, SC, which is expected to have a sufficient degree of fluid-tightness and appropriate recovery, is preferable to other continuous appositional suturing methods for cystotomy closure.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.2
• /
• pp.55-62
• /
• 2010

This paper investigates the shear properties of waste tire-bottom ash mixture with various particle size of waste tire powder. Test specimens were prepared at 5 different percentages of waste tire powder content (i.e., 0%, 25%, 50%, 75%, 100% by weight of the dry bottom ash), and with three different particle sizes of waste tire powder (i.e., 0.1 mm~2.0 mm, 0.9 mm~5 mm and 2 mm~10 mm). In this study several series of direct shear tests were carried out. The experimental results indicate that the mechanical characteristics of waste tire-bottom ash mixture are strongly influenced by the particle size as well as waste tire powder content. It is shown that the shear strength and internal friction angle of waste tire-bottom ash mixture decrease with an increase in waste tire powder content. However, the shear strength and internal friction angle of the mixture increase due to interlocking effect between waste tire powder and bottom ash as the particle size of waste tire powder increases.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1272-1274
• /
• 2002

It is very important to ensure system safety during the process of developing a system, Railway system is also devoting a great portion for the safety. Nowadays many countries leading railway industry have their own system assessment process according to the situation of their train control system. In this paper, a preprocess to establish system safety requirement is represented in the railway signalling system. We also adopt electronic interlocking system for an example.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.71-87
• /
• 2015

Mobile users want to be provided with undisrupted network services when they navigate on the Next-Generation (NG) wireless networks. For that, interlocking with a heterogeneous network is important, but there have been few studies on the method for guaranteeing global mobility. Thus, this paper proposes the Proxy-LMA technique, the mobile IP-based global inter-networking system, to enhance global mobility and interoperability within the Next-Generation (NG) network environment. The purpose of the proposed Proxy-LMA system is to expand the boundary of the mobility with regards to the existing mobility management protocol (PMIPv6 and MIPv6) in order to guarantee global mobility and interoperability within the heterogeneous network environment. The results of the performance evaluation showed that the proposed Proxy-LMA system was more efficient than other methods from the standpoint of signaling cost and delay in the heterogeneous network environment.