• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.373-374
• /
• 2020

This paper proposes an optimal control algorithm which determines active damping resistor values considering load variation and grid side current THD. Proposed optimal control algorithm improves grid side current THD of the interlinking converter without passive damping resistor and is verified by simulation under variable load conditions.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.118-120
• /
• 2019

제안하는 논문은 3상 4선식 방식의 Interlinking Converter(ILC)를 사용하여 DC bus와 AC bus를 연계 한다. 역상분 성분은 정상분 성분과 다르게 전압 평형시 발생하지 않다가 전압 불평형시 발생하기 때문에 역상분을 추출하여 제어함으로써 불평형을 개선한다. Psim 시뮬레이션을 통해 본 논문의 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.148-149
• /
• 2019

Voltage unbalance can be occured in AC-DC microgrid systems when AC loads or AC systems are connected. To solve this problem, 3-phase 4-wire interlinking converter is used. This paper proposes in PLL method that can detect accurate phase and voltage magnitude.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.527-528
• /
• 2015

최근 다양한 디지털기기에 따른 DC 부하의 증가와 함께 기존 배전망과 연계하여 운용할 수 있는 AC 그리드와 태양광과 연료전지 같은 DC 전원에 직접적으로 연계하여 운용하는 DC 그리드를 통합하는 AC/DC 마이크로그리드에 대한 연구가 진행되고 있다. 본 논문에서는 AC 그리드와 DC 그리드를 연계 제어하는 연계(interlinking) 컨버터의 제어기를 설계하고 성능을 검토하기 위해 TMS320F28335 DSP(Digital Signal Processor)와 실시간 디지털 시뮬레이터인 eMEGAsim으로 구성된 HILS(Hardware-in-the-Loop Simulation) 시스템을 구축하고 설계된 제어기의 성능을 테스트하였다.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.144-145
• /
• 2019

This paper proposes a design and analysis for a PI-IP hybrid voltage controller with a combination of PI and IP voltage controller for stable voltage control of DC bus voltage, Transient characteristic of DC bus voltage is improved by designed setting variable value and control method in the variable load and power generation conditions.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.106-107
• /
• 2019

This paper propose a new 3D SVM method for three-phase four wire inverter for fault isolation at a single line ground fault. The available switching combination for isolation of a single line ground fault was analyzed. Using this method, voltage vector diagrams according to each switching combination were classified according to various ground fault situations, and 3D SVM method was performed by generating command for fault isolation. The proposed methods are mathematically analyzed and verified by PSIM simulation.