• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.199-208
• /
• 2014

Code division multiple access (CDMA) is one of the promising medium access control (MAC) schemes for underwater acoustic sensor networks because of its robustness against frequency-selective fading and high frequency-reuse efficiency. As a way of performance evaluation, sea or lake experiment has been employed along with computer simulation.. In this study, we design the underwater CDMA forward-link transceiver and evaluate the feasibility aginst harsh underwater acoustic channel in water-tank first. Then, based on the water-tank experiment results, we improved the transceiver and showed the improvements in a lake experiment. A pseudo random noise code acquisition process is added for phase error correction before decoding the user data by means of a Walsh code in the receiver. Interleaving and convolutional channel coding scheme are also used for performance improvement. Experimental results show that the multiplexed data is recovered by means of demultiplexing at receivers with error-free in case of two users while with less than 15% bit error rate in case of three and four users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3C
• /
• pp.311-321
• /
• 2009

This paper proposes an efficient frequency offset estimation algorithm for MB-OFDM based UWB systems. The time-frequency interleaving in MB-OFDM extends the time-interval between two transmitted OFDM symbols in the same sub-band. The extended time-interval causes not only the degradation of the system performance by reducing frequency offset estimation range, but also the increase of the hardware complexity by requiring the larger number of storing samples. The proposed estimation algorithm expands the estimation range by applying the proposed sign detection scheme. Simulation results show that the estimation range is increased above 30 ppm compared with a conventional auto-correlation based scheme. The estimation is performed on only one sub-band, and the frequency offsets of the others are calculated by relation to center frequency. This way reduced the number of the storing samples by about l/3. The frequency offset estimator with the proposed algorithm was designed into the architecture which minimizes hardware overhead by time-sharing operators and memory units, and which was synthesized to gate-level circuits using $0.13{\mu}m$ CMOS technology, and the total gates were about 47K.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.420-425
• /
• 2012

A forward error correction (FEC) coding techniques is one of time diversity techniques with which the effect of channel impairments due to noise and fading are spreaded over independently, and thus the performance could be improved. Therefore, the performance of the FEC scheme can be maximized if we minimize the correlation of channel information across over a codeword. In this paper, we propose a block turbo code with the maximized time diversity effect which may be reduced due to utilization of high order modulation schemes and due to transmission over a comparatively fast fading environment. Especially, we propose a very simple formula to calculate the address of coded bit allocation, and thus we do not need any additional outer interleavers, i.e., inter-codeword interleavers. The simulation resuts investigated in this paper reveal that the proposed scheme can provide the performance gain of more than a few decibels compared to the conventional schemes.

• The KIPS Transactions:PartB
• /
• v.10B no.2
• /
• pp.143-150
• /
• 2003

Error concealment plays an important role in combating transmission errors. Methods of error concealment which produce better quality are generally of higher complexity, thus making some of the more sophisticated algorithms is not suitable for real-time applications. In this paper, we develop temporal and spatial error resilient video encoding and data hiding approach to facilitate the error concealment at the decoder. Block interleaving scheme is introduced to isolate erroneous blocks caused by packet losses for spatial area of error resilience. For temporal area of error resilience, data hiding is applied to the transmission of parity bits to protect motion vectors. To do error concealment quickly, a set of edge features extracted from a block is embedded imperceptibly using data hiding into the host media and transmitted to decoder. If some part of the media data is damaged during transmission, the embedded features are used for concealment of lost data at decoder. This method decreases a complexity of error concealment by reducing the estimation process of lost data from neighbor blocks. The proposed data hiding method of parity bits and block features is not influence much to the complexity of standard encoder. Experimental results show that proposed method conceals properly and effectively burst errors occurred on transmission channel like Internet.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.228-237
• /
• 2003

Eureka-147 DAB(Digital Audio Broadcasting) system on which DMB(Digital Multimedia Broadcasting) system is based, was designed for the requirements of CD qualify audio with ${10}^{-4}$ bit error rate. Audio program may be primary service in DAB system, but multimedia program can be primary service in DMB system. Therefore, the bit error rate required must be below ${10}^{-7}$∼${10}^{-8}$ to transmit multimedia data via DMB channel. In order to meet the requirements and keep backward compatibility of DAB system we propose an outer channel coding scheme using Reed-Solomon coding and convolutional interleaving. This paper shows the simulation results for DMB channel performance based on mobile channel model. Also, it describes the needs and the effects of the outer channel coding.

• Journal of Power Electronics
• /
• v.10 no.1
• /
• pp.9-13
• /
• 2010

This paper proposes an input-series-output-parallel connected ZVS full bridge converter with interleaved control for photovoltaic power conditioning systems (PV PCS). The input-series connection enables a fully modular power-system architecture, where low voltage and standard power modules can be connected in any combination at the input and/or at the output, to realize any given specifications. Further, the input-series connection enables the use of low-voltage MOSFETs that are optimized for a very low RDSON, thus, resulting in lower conduction losses. The system costs decrease due to the reduced current, and the volumes of the output filters due to the interleaving technique. A topology for a photovoltaic (PV) dc/dc converter that can dramatically reduce the power rating and increase the efficiency of a PV system by analyzing the PV module characteristics is proposed. The control scheme, consisting of an output voltage loop, a current loop and input voltage balancing loops, is proposed to achieve input voltage sharing and output current sharing. The total PV system is implemented for a 10-kW PV power conditioning system (PCS). This system has a dc/dc converter with a 3.6-kW power rating. It is only one-third of the total PV PCS power. A 3.6-kW prototype PV dc/dc converter is introduced to experimentally verify the proposed topology. In addition, experimental results show that the proposed topology exhibits good performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.21-27
• /
• 2013

In this paper, we propose a low-complexity Turbo coded BICM-ID (bit-interleaved coded modulation with iterative decoding) system. A Turbo code is a powerful error correcting code with a BER (bit error rate) performance very close to the Shannon limit. In order to increase spectral efficiency of the Turbo code, a coded modulation combining Turbo code with high order modulation is used. The BER performance of Turbo-BICM can be improved by Turbo-BICM-ID using iterative demodulation and decoding algorithm. However, compared with Turbo-BICM, the decoding complexity of Turbo-BICM-ID is increased by exchanging information between decoder and demodulator. To reduce the decoding complexity of Turbo-BICM-ID, we propose a low-complexity Turbo-BICM-ID system. When compared with conventional Turbo-BICM-ID, the proposed scheme not only show similar BER performance but also reduce the decoding complexity.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.29-37
• /
• 2008

To transmit video bit stream over low bandwidth such as wireless channel, high compression algorithm like H.264 codec is exploited. In transmitting high compressed video bit-stream over low bandwidth, packet loss causes severe degradation in image quality. In this paper, a new algorithm for recovery of missing or erroneous motion vector is proposed. Considering that the missing or erroneous motion vectors in blocks are closely correlated with those of neighboring blocks. Motion vector of neighboring blocks are clustered according to average linkage algorithm clustering and a representative value for each cluster is determined to obtain the candidate motion vector sets. As a result, simulation results show that the proposed method dramatically improves processing time compared to existing H.264/AVC. Also the proposed method is similar to existing H.264/AVC in terms of visual quality.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.9
• /
• pp.381-392
• /
• 2013

During the last decade, the multitude of advances attained in terminal computers, along with the introduction of mobile hand-held devices, and the deployment of high speed networks have led to a recent surge of interest in Quality of Service (QoS) for video applications. The main difficulty is that mobile devices experience disparate channel conditions, which results in different rates and patterns of packet loss. One way of making more efficient use of network resources in video services over wireless channels with heterogeneous characteristics to heterogeneous types of mobile device is to use a scalable video coding (SVC). An SVC divides a video stream into a base layer and a single or multiple enhancement layers. We have to ensure that the base layer of the video stream is successfully received and decoded by the subscribers, because it provides the basis for the subsequent decoding of the enhancement layer(s). At the same time, a system should be designed so that the enhancement layer(s) can be successfully decoded by as many users as possible, so that the average QoS is as high as possible. To accommodate these characteristics, we propose an efficient transmission scheme which incorporates SVC-aware dual-channel repetition to improve the perceived quality of services. We repeat the base-layer data over two channels, with different characteristics, to exploit transmission diversity. On the other hand, those channels are utilized to increase the data rate of enhancement layer data. This arrangement reduces service disruption under poor channel conditions by protecting the data that is more important to video decoding. Simulations show that our scheme safeguards the important packets and improves perceived video quality at a mobile device.