• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.06a
• /
• pp.49-51
• /
• 2017

본 논문에서는 ATSC 3.0 시스템의 2x2 MIMO (multiple input multiple output) 방식을 적용한 송수신기 구조에 대해서 살펴본다. ATSC 3.0 시스템의 MIMO 에서 적용된 프리코더 (precoder)는 스트림 결합기(stream combining), IQ 편파 인터리빙 (I/Q polarization interleaving), 위상 홉핑부 (phase hopping)로 구성된다. 또한, ATSC 3.0 의 2x2 MIMO 방식을 사용함으로써 공간 다중화 (spatial multiplexing) 이득과 공간 다이버시티 (spatial diversity) 이득을 얻을 수 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.72-73
• /
• 2003

In volume holographic memory (VHM), two-dimensional data array (i.e. data page) is used for the recording and the retrieving process with the aid of spatial light modulator (SLM) and CCD camera. Due to this two-dimensional parallel data processing, burst errors in this system also have two-dimensional characteristics in a data page domain. In this paper, we present a channel model of the burst noise and burst error for the VHM system using disk type recording media. (omitted)

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.88-92
• /
• 2014

This paper presents an application of a multiphase interleaved converter in tracking maximum power points (MPPs) of a photovoltaic (PV) panel regardless of environmental variations. Maximum power from the panel was extracted by means of the well-known the perturb-and-observe (P&O) method. The switching control technique used an interleaving scheme based on multi-unit synchronization. The converter performed harmonic attenuation without affecting the tracking speed. This approach is straightforward, reliable and inexpensive, and could be applied to any higher number of switching cells without difficulty.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.39-45
• /
• 2012

In this paper the digital control scheme of interleaved PFC for 3-phase modular UPS is presented. The interleaved PFC is composed of two identical PFC connected in parallel and each PFC is controlled by the interleaved switching signals which have the same switching frequency and the $180^{\circ}$ phase difference. As a consequence of the interleaving operation, the Interleaved PFC exhibits both lower current ripple at the input side and lower voltage ripple at the outside. Therefore, the switching and conduction losses as well as EMI levels can be significantly decreased. Simulation and experimental results verify the usefulness of the interleaved PFC.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2470-2472
• /
• 1998

In this paper, we proposed the method to improve the performance of Viterbi decoder by applying Concatenated structure. Proposed decoder for Concatenated Code is designed with inner Viterbi decoder, block deinterleaver and outer Viterbi decoder. Inner Viterbi decoder (K=7, R=1/2) has 8-level soft decision, but outer decoder (K=7, R= 1/2) has 2-level hard decision. Applied interleaving scheme make decoder to have better BER performance in Concatenated code. The designed VLSI shares inner decoder with outer decoder. Because of sharing structure, complexity of decoder can be reduced to half. But it required about twice clock speed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.36-44
• /
• 2014

The conventional central photo voltaic inverters have several problems. First, shadow problem in each solar panel, and high DC voltage problem from each panel because of concentration to one central inverter. Therefore, module integrated inverter is proposed to solve these problems. The inverter should be small and cost effective. The cost and size in the inverter depend on the inductor. So the switching frequency should be increased to reduce the inductor and total size, but there is a problem in efficiency because of the losses in turn-on and turn-off. In the paper, the critical conduction mode(CRM) switching method is adopted to reduce the switching loss and interleaving method is proposed to increase the efficiency in Flyback converter. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype system rated at 200W.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.195-196
• /
• 2012

In recent years, in an effort to improve the efficiency and the power density of the front-end power factor correction(PFC), the interleaving of multiple converter is employed. The conventional interleaved continuous conduction mode(CCM) boost PFC converter requires input and output voltage sensing and three current sensing to obtain current balancing between modules. In this paper, the interleaved CCM PFC converter based on modulated carrier control is proposed. With the proposed method, two phase interleaved PFC can be realized simply without line voltage sensing resistor and can achieve current balancing without additional current sensing resistor on common return path. The simulation studies are carried out to verify the effectiveness of the proposed control scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.197-206
• /
• 1997

The purpose of this paper is to propose an improvement method of BER for coded 16QAM over Rayleigh fading channel. To overcome the BER degradation due to the fading under mobile communication, we apply trellis coded modulation technique which is efficient to get a coding gain without the expansion of bandwidth. Especially, to minimize the burst error which are the main factor of the BER degradation for mobile communication systems, we apply interleaving/deinterleaving method to the studying system. Also we apply asymmetric signal mapping methods to this TCM scheme. From the computer simulation, BER performance of asymmetric case has achieved about 1 dB improvement of about $10^{-4}$, compared to the traditional symmetric case.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.4
• /
• pp.3-38
• /
• 1996

The mobile station shall convolutionally encode the data transmitted on the reverse traffic channel and the access channel prior to interleaving. Code symbols output from the convolutional encoder are repeated before being interleaved except the 9600 bps data rate. All the symbols are then interleaved, 64-ary orthogonal modulation, direct-sequence spreading, quadrature spreading, baseband filtering and QPSK transmission. The sync, paging, and forward traffic channel except the pilot channel in the forward CDMA channel are convolutionally encoded, block interleaved, spread with Walsh function at a fixed chip rate of 1.2288 Mcps to provide orthogonal channelization among all code channels. Following the spreading operation, the I and Q impulses are applied to respective baseband filters. After that, these impulses shall be transmitted by QPSK. Authentication in the CDMA system is the process for confirming the identity of the mobile station by exchanging information between a mobile station and the base station. The authentication scheme is to generate a 18-bit hash code from the 152-bit message length appended with 24-bit or 40-bit padding. Several techniques are proposed for the authentication data computation in this paper. To protect sensitive subscriber information, it shall be required enciphering ceratin fields of selected traffic channel signaling messages. The message encryption can be accomplished in two ways, i.e., external encryption and internal encryption.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.506-509
• /
• 2022

In a secret sharing scheme, secret information must be distributed and stored to users, and confidentiality must be able to be reconstructed only from an authorized subset of users. To do this, secret information among different code words must not be subordinate to each other. The minimal code is a kind of linear block code to distribute these secret information not mutually dependent. In this paper, we present a novel extension technique for minimal codes. The product of an arbitrary vector and a minimal code produces a new minimal code with an extended length and Hamming weight. Accordingly, it is possible to provide minimal codes with parameters not known in the literature.