• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.45-47
• /
• 2001

Jeju island is composed mainly of volcanic rocks such as basalts, trachytic andesites, tracytes, and sedimentary rocks. About 80% of Jeju soils are classified as Andisols. The amount of annual precipitation in Jeju island is about 1872mm, which is 1.5 times the annual precipitation of south Korea. There is a significant difference In amount of precipitation with regions even within Jeju island. In study area, the annual amount of rainfall is about 1280mm, the lowest in Jeju island while south part of the island has the annual precipitation of 2056mm, though they are only tens of kilometers apart. The parent materials of soils in study area are pyroclastic rocks and tuffs. The soils of non-andic properties have developed in this area since pedogenic process of pyroclastic materials is strongly influenced by climatic factor, especially precipitation. In order to investigate the mineralogical characteristics of soils, X-ray analysis for <0.2 and 2-0.2$\mu\textrm{m}$ size fractions was performed with ethylene glycol solvation, K-, Mg-saturation, heat treatment(110, 330, 550$^{\circ}C$). Acid-oxalate and DCB(sodium hydrosulfite, sodium citrate, sodium bicarbonate) dissolution method was used to assess tile total amounts or Al, si, and hydroxy interlayer or 2:1 layer silicates. XRD was also applied for samples treated with DCB only and DCB-oxalate sequentially. XRD patterns showed that 2:1 and 1:1 layer silicates were found, which are different from soils of Andisols. Vermiculite, chlorite, hydroxy interlayered minreals, and interstratified minerals(vermiculite/chlorite) were observed in 2-0.2$\mu\textrm{m}$ size fractions. After DCB treatments, ethylene glycolated samples with Mg-saturation showed expanded d-spacing, suggesting the possibility of hydroxy interlayered minerals. The amounts of hydroxy interlayered minerals increased in surface soil. Unlike Andisols, short range ordered minerals such as allophane, imogolite and gibbsite were hardly found. Mica and kaolinte existed in small amounts. Results are summarized in Fig 1 and Fig. 2.

• Carbon letters
• /
• v.24
• /
• pp.97-102
• /
• 2017

Graphite fibers are materials with a high specific modulus that have attracted much interest in the aerospace industry, but their high manufacturing cost and low yield are still problems that prevent their wide applications in practice. This paper presents a laser-based process for graphitization of carbon fiber (CF) and explores the effect of laser radiation on the microstructure of CF. The obtained Raman spectra indicate that the outer surface of CF evolves from turbostratic structures into a three-dimensional ordered state after being irradiated by a laser. The X-ray diffraction data revealed that the growth of crystallite was parallel to the fiber axis, and the interlayer spacing $d_{002}$ decreased from 0.353 to 0.345 nm. The results of scanning electron microscopy revealed that the surface of irradiated CFs was rougher than that of the unirradiated ones and there were scale-like small fragments that had peeled off from the fibers. The tensile modulus increased by 17.51% and the Weibull average tensile strength decreased by 30.53% after being irradiated by a laser. These results demonstrate that the laser irradiation was able to increase the graphitization degree of the CFs, which showed some properties comparable to graphite fibers.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.360-366
• /
• 2006

We have performed density functional theory calculations for the surface structure of O/Pd(100)-p($2{\times}2$), formed by the adsorption of oxygen atoms of 0.25 ML. The oxygen atoms adsorb preferentially at the fourfold hollow site, and the calculated O-Pd bond length is $2,15{\AA}$, The first interlayer spacing ($d_{12}$) of Pd(100) expands by +0.8% due to the oxygen adsorption, which differs from the experimental value of +3.6% reported by a previous LEED study. Assuming that the LEED sample was possibly contaminated by hydrogen atoms, we also examined the effect of hydrogen impurities on the surface structure. Hydrogen atoms adsorbed on O/Pd(100)-p($2{\times}2$) are found to result in large expansions of $d_{12}$ of Pd(100). Our analysis estimates the amount of hydrogen atoms remaining on the LEED sample as -0.3 ML.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.61-65
• /
• 1999

A new treatment of $LiV_3O_8$ has been proposed for improving its electrochemical behavior as a cathode material for secondary lithium batteries. Lithium trivanadate, $LiV_3O_8$, can be prepared in a finely dispersed form by dehydration of aqueous lithium trivanadate gels. The ultrasonic treatment method for Liv30s has been examined in comparison with $LiV_3O_8$ prepared by solutionmethod. The ultrasonically treated products in water were characterized by XRD (X-ray diffractometry), TGA (thermogravimetric analysis) and SEM (scanning electron microscopy). These measurements showed that the ultrasonic treatment process of aqueous $LiV_3O_8$ caused a decrease in crytallinity and considerable increased in specific surface area and interlayer spacing. The product, ultrasonically treated in water for 2 h, showed a high initial discharge capacity and was charge-discharge cycled without large capacity loss. The ultrasonic treated Liv30s can improve not only the specific capacity, but also the cycling behavior

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.34-39
• /
• 2009

In this study, a needle coke was oxidized in a mixture of dilute nitric acid and sodium chlorate ($NaClO_3$) solutions and followed by heat treatment. The samples were analyzed with using XRD, FESEM, elemental analyzer, BET, and Raman spectroscopy. Double layer capacitance was measured with the charge and discharge measurements. The consisting layers of the needle coke were expanded to single phase showing only (001) diffraction peak by the acid treatment for 24 hours. The oxidized coke returned to a graphite structure appearing (002) peak after heat treatment above $200^{\circ}C$. The structure returned could be more easily accessible to the ions by the first charge, and improve the double layer capacitance at the second charge. The two-electorde cell from acid treated coke and $300^{\circ}C$ heat treatment exhibited the maximum capacitances of 32.1 F/g and 29.5 F/ml at the potential of $0{\sim}2.5\;V$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1712-1716
• /
• 2004

Copper-bearing montmorillonite (Cu-MMT) was produced by $Cu^{2+}$ cation exchange reaction. X-ray diffraction analysis showed that that the (001) basal spacing of the MMT crystal lattice increased from 1.544 to 1.588 nm after $Cu^{2+}$ exchange. This indicated that $Cu^{2+}$ entered into interlayer position of MMT as a hydrated cation or composite cation. In vitro results indicated that Cu-MMT had antibacterial activity on Escherichia coli $K_{88}$. Cu-MMT had unbalanced positive charge after cation exchange. Its antibacterial activity resulted from two aspects, one was electrostatic attraction which made E. coli $K_{88}$ being adhered on the montmorillonite surface, the other was the $Cu^{2+}$ slowly released, which could kill bacteria. In an in vivo study, four replicates of eight weanling pigs were assigned to each of two dietary treatments to study the effects of Cu-MMT on diarrhea, E. coli in the lumen of the jejunum and morphology of jejunal mucosa. As compared to the control, supplementation of the diet with 0.2% Cu-MMT improved average daily gain by 12.50% (p<0.05) and decreased F/G by 9.42% (p<0.05). The mean diarrhrea incidence was decreased by 71.80% (p<0.05). The viable counts of Escherichia coli in jejunal contents were significantly reduced (p<0.05). Villus height and the villus height to crypt depth ratio at the jejunal mucosa were increased by 19.09% (p<0.05) and 37.10% (p<0.05), respectively.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.260-266
• /
• 2003

Ethylene vinyl acetate (EVA)/clay nanocomposites were synthesized by blending a solution of ethylene vinyl acetate copolymer containing 12% vinyl acetate abbreviated as EVA-12 in toluene and dispersion of dodecyl ammonium ion intercalated montmorillonite (l2Me-MMT) in N,N-dimethyl acetamide (DMAc). X-ray patterns of sodium montmorillonite ($Na^+$-MMT) and 12Me-MMT exhibited $d_{001}$ peak at $2{\theta}=7.4^{\circ}$ and $2{\theta}=5.6^{\circ}$ respectively; that is, the interlayer spacing of MMT increased by about 0.39 nm due to intercalation of dodecyl ammonium ions. The XRD trace of EVA showed no peak in the angular range of $3-10^{\circ}(2{\theta})$. In the XRD patterns of EVA/clay hybrids with clay content up to 6 wt% the basal reflection peak of 12Me-MMT was absent. leading to the formation of delaminated configuration of the composites. When the 12Me-MMT content was 8 wt% in the EVA-12 matrix, the hybrid revealed a peak at about $2{\theta}=5.6^{\circ}$, owing to the aggregation of aluminosilicate layers. Transmission electron microscopic photograph exhibited that an average size of 12-15 nm clay layers were randomly and homogeneously dispersed in the polymer matrix, which led to the formation of nanocomposite with delaminated configuration. The formation of delaminated nanocomposites was manifested through the enhancement of mechanical properties and thermal stability, e.g. tensile strength of an hybrid containing only 2 wt% 12Me-MMT was enhanced by about 36% as compared with neat EVA-12.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.297-302
• /
• 2016

In this study, we prepared liquid crystal emulsions composed of $C_{12-20}$ alkyl glucoside, $C_{14-22}$ alcohol, and behenyl alcohol and performed structure analysis using various analytical equipment. First, as an important characteristic of liquid crystal emulsions, maltese cross patterns and multi-layer structure were observed by a polarized microscope and cryo-SEM. Also, formation of liquid crystal phase was confirmed by DSC and multi-layer lamellar structure having an interlayer spacing approximately $305{\AA}$ was confirmed by small angle x-ray scattering (SAXS). The alkyl chain arrangement formed orthorhombic structure of a lamellar structure of the liquid crystal emulsion was confirmed by wide angle x-ray scattering (WAXS). These results suggest that information on the various physical properties obtained through the research of liquid crystal emulsion structure is expected to be widely used in cosmetics development in the future.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.268-273
• /
• 2016

To improve mechanical strength of carbon foams, the carbon black (CB) added carbon foams were fabricated by impregnating different contents of carbon black (CB) and mesophase pitch using polyvinyl alcohol (PVA) solution into polyurethane foam and being followed by heat treatment. The cell wall-thicknesses of carbon foams were controlled by adding amounts of CB, and it was confirmed that the compressive strength of carbon foams was increased as increasing cell wall-thickness. The compressive strength had the highest value of $0.22{\pm}0.05MPa$ with the highest bulk density of $0.44g/cm^3$ when adding 5 wt% CB in carbon foam. However, the thermal conductivity was decreased by adding CB in carbon foam. The results indicated that the thermal conductivities of carbon foams were reduced by increased interlayer spacing ($d_{002}$) with the addition of CB in carbon foams.

• Membrane Journal
• /
• v.29 no.3
• /
• pp.130-139
• /
• 2019

Various two-dimensional nano materials such as graphene, zeolite, and metal-organic framework have been utilized to develop an ultra-thin high-performance membrane for water purification, gas separation, and so on. Particularly, in the case of graphene oxide, synthesis methods and thin film coating techniques have been accumulated and established since early 2000s, therefore graphene oxide has been rapidly applied to membrane field. The multi-layered graphene oxide thin film can filter molecules separately by the molecular sieving of interlayer spacing between adjacent layers, and it is also possible to separate various materials depending on the surface functional groups or the degree of interaction to intercalated materials. This review mainly focuses on the nanofiltration application of graphene oxide. The major factors affecting the separation performance of graphene oxide membrane in solvent are summarized and other technical elements required for the commercialization of graphene oxide membranes will be discussed including stability issue and fabrication method.