• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.63-66
• /
• 2003

The effect of punching density and material composition on the tensile properties and optimum condition of manufacturing of carbon needle punched perform was studies. The interlaminar tensile strength were increased but the intralaminar tensile strength were decreased with increasing punching density. In the case of the performs composed of continuous oxi-PAN fabrics, there was a considerable improvement of the interlaminar and intralaminar tensile strength.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.50-53
• /
• 2000

The effect of punching density on the mechanical and thermal properties of nonwoven needle-punched carbon/phenol composite was studied. The carbonized preforms were farmed into composites with phenol resin. The interlaminar shear, tensile and flexural strengths were increased with increasing punching density. However, excessive punching density decreased interlaminar shear and tensile strengths. Erosion rate of carbon/phenol composite was decreased with increasing punching density

• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.95-113
• /
• 2007

Experimental investigations of interlaminar mechanical properties for carbon fiber reinforced plastic (CFRP) laminates were carried out using aramid fiber ($Kevlar^{(R)}$-29 1000d) and carbon fiber (TR40-1K 612d, Mitsubishi Rayon) stitching. Various carbon fiber (CF) stitch densities were used to prepare a number of CF stitched CFRP laminates for double cantilever beam (DCB) tests. An insert tongue-type loading fixture, developed by the Japan Aerospace Exploration Agency (formerly the National Aerospace Laboratory of Japan), was also employed in the DCB test. Interlaminar tension tests were carried out under an out-of-plane directional loading using a single CF stitch thread in the CFRP laminates. The DCB test results clarified that the relationship between the volume fractions of the CF stitch thread ($V_{ft}$) and mode I critical energy release rate ($G_{Ic}$) showed a mostly linear function with a higher gradient than that of the $Kevlar^{(R)}$ stitched CFRP laminates. The CF stitched CFRP tension test results indicated that the consumption energy per unit area ($E_i$) was larger than that of $Kevlar^{(R)}$ stitched CFRP laminates.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.58-67
• /
• 2003

Over the last decade fiber-reinforced polymer (FRP) reinforcement consisting of glass, carbon, or aramid fibers embedded in a resin such as vinyl ester, epoxy, or polyester has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. But reinforcing rebar for concrete made of FRP rebar has linear elastic behavior up to tensile failure. For safety a certain plastic strain and an elongation greater than 3% at maximum load is usually required for steel reinforcement in concrete structures. The same should be required for FRP rebar. Thus, the main object of this study was to develop new type of hybrid FRP rebar Also, this study was evaluated to the mechanical properties of Hybrid FRP rebar. The Manufacture of the hybrid FRP rebar was achieved by pultrusion, and braiding and filament winding techniques. Tensile and interlaminar shear test results of Hybrid FRP rebar can provide its excellent tensile strength-strain behavior and interlaminar stress-strain behavior.

• 대한금속재료학회지
• /
• 제49권10호
• /
• pp.754-759
• /
• 2011

In this study, the interlaminar fracture behaviors of laminated GFRP composites were investigated, and the results could be used for damage tolerance design based on fracture mechanics. Three types of laminated GFRP composites that can be used as high voltage insulating materials in magnet systems were fabricated in order to study the interlaminar fracture behavior according to the molding process. The values of interlaminar fracture toughness for the VPI, prepreg, and HPL laminate were $1.9MPa{\cdot}^{1/2}$, $1.7MPa{\cdot}^{1/2}$, and $2.2MPa{\cdot}^{1/2}$, respectively. HPL laminate showed the best fracture resistance. The failure modes of HPL and VPI were similar to that of an adhesive joint, and prepreg laminates showed partial cohesive failure mode due to internal voids.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.119-126
• /
• 2004

In this study, the influence of silane coupling agents, featuring different organo-functional groups on the interlaminar and thermal properties of woven glass fabric-reinforced nylon 6 composites, has been by means of short-beam shear tests, dynamic mechanical analysis, scanning electron microscopy, and thermogravimetric analysis. The results indicate that the fiber-matrix interfacial characteristics obtained using the different analytical methods agree well with each other. The interlaminar shear strengths (ILSS) of glass fabric/nylon 6 composites sized with various silane coupling agents are significantly improved in comparison with that of the composite sized commercially. ILSS of the composites increases in the order: Z-6076 with chloropropyl groups in the silanes > Z-6030 with methacrylate groups> Z-6020 with diamine groups; this trend is similar to that of results found in an earlier study of interfacial shear strength. The dynamic mechanical properties, the fracture surface observations, and the thermal stability also support the interfacial results. The improvement of the interfacial properties may be ascribed to the different chemical reactivities of the reactive amino end groups of nylon 6 and the organo-functional groups located at the ends of the silane chains, which results from the increased chemical reactivity in order chloropropyl > methacrylate > diamine.

• Composites Research
• /
• 제24권5호
• /
• pp.34-38
• /
• 2011

탄소나노튜브가 발견된 이후로, 고분자 수지의 기계적, 전기적 물성을 증대시키는 보강재로서 많은 연구가 수행되어 왔다. 더 나아가, 탄소나뉴튜브를 탄소섬유복합재 (CFRP)의 기지가 되는 수지를 보강시키는 데 이용하는 연구도 최근 활발해지고 있는 추세이다. 단일벽탄소나노튜브가 각각 0.2 %, 0.5 %의 중량비로 에폭시 수지에 먼저 분산, 혼합되었다. 이 혼합액을 CFRP를 제작하는데 주로 쓰이는 방법 중 하나인 진공 수지 충전 공정법 (vacuum assisted resin transfer molding, VARTM)으로 탄소섬유 프리폼에 주입하는 방법과 습식 현장 적층법 (wet lay-up)의 두가지 다른 방법으로 복합재를 제작 하였다. 각각의 제작된 시편에 대하여, 층간전단강도 (interlaminar shear strength, ILSS)를 측정하여, 층간전단강도와 공정의 상관관계, 탄소나노튜브의 보강효과에 대하여 조사했다. 탄소나노튜브/에폭시 복합재의 경우 기계적 물성의 향상을 가져왔으나 이를 기지재로 사용한 탄소섬유복합재의 층간전단강도는 특히 VARTM 공정의 경우, 탄소나노튜브의 첨가에 따른 수지의 점도 증가로 인한 공정상의 문제로 기대만큼의 물성향상을 가져오지는 못한 것을 확인하였다.

• Composites Research
• /
• 제21권2호
• /
• pp.1-7
• /
• 2008

복합재료는 현재 항공-우주산업, 스포츠와 레저 산업에서 널리 사용되고 있으나, 흡습에 의해 기계적 성질이 저하하는 문제점을 가지고 있다. 본 연구에서는 이러한 문제점에 대한 규명을 위해 $80^{\circ}C$의 수 환경(담수/해수)에서 $100{\sim}200일$ 동안 침지/침지 - 건조한 시편으로 전단강도를 평가하였다. 그 결과, 전단강도의 하락은 초기에는 수지부의 흡습과 실란부의 흡습에 의한 물성저하 그리고 나중에는 실란부와 섬유와의 기계적 결합의 파괴가 주요원인으로 판단되었다. 결론적으로, 복합재료 내의 수분으로 인해 비가역구간을 넘어서게 되면 수분으로 인한 계면 파괴가 일어나 전단강도 회복이 어려워지는 것으로 판단된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.245-248
• /
• 2005

During manufacturing thick composite cylinders, large thermal residual stresses are developed and induce catastrophic interlaminar failures. Since the residual stresses are dependent on many process parameters, such as temperature distribution during cure, cure shrinkage, winding tension, and migration of fibers, calculation of the residual stresses is very difficult. Therefore a radial-cut method have been used to measure the residual stresses in the composite cylinders. But the conventional radial-cut method needs to know numerous material properties which are not only troublesome to obtain but also vary with change of fiber arrangement during consolidation. In this paper, a new radial-cut method with cut-cylinder-bending test was proposed and the measured residual stresses were compared with calculated thermal residual stresses. It was found that the new radial-cut method which does not need to know any of material properties gave better estimation of residual stresses regardless of radial variation of material properties. Additionally, interlaminar tensile strength could be obtained by the cut-cylinder-bending test.

• 접착 및 계면
• /
• 제10권2호
• /
• pp.106-112
• /
• 2009

본 연구에서 처음으로 생분해성 라이오셀 직물과 poly(butylene succinate) (PBS)로 이루어진 바이오복합재료가 성공적으로 제조되었다. 0, 30, 40, 50 그리고 60 wt%의 서로 다른 함량의 라이오셀직물을 포함하는 라이오셀/poly(butylene succinate) 바이오복합재료는 sheet interleaving 방식으로 압축성형에 의해 제조되었다. 바이오복합재료의 층간전단강도, 인장 및 굴곡 특성, 열변형 온도, 열팽창 거동 및 열안정성에 미치는 라이오셀직물 함량의 영향을 조사하였다. 특성들은 직물함량에 크게 의존하였으며, 그 결과들은 서로 일치하였다. 라이오셀직물을 수지에 도입하는 것이 poly(butylene succinate)의 여러 가지 특성 향상에 두드러진 역할을 하는 것으로 확인되었다. 라이오셀직물이 중량비로 50%일 때, 바이오복합재료의 가장 우수한 층간전단강도, 인장, 굴곡 및 열적 특성이 얻어졌다.