• 폴리머
• /
• 제39권2호
• /
• pp.219-224
• /
• 2015

본 연구에서는 현무암섬유의 계면을 황산과 과산화수소로 처리하고 섬유 배향각을 $0^{\circ}$, $0^{\circ}/90^{\circ}$, $0^{\circ}/45^{\circ}/-45^{\circ}$로 달리하여 현무암섬유 에폭시 강화 복합재료의 기계적 특성에 미치는 영향에 대해서 살펴보았다. 기계적 특성은 층간 전단강도(ILSS)와 파괴인성 요소 중 임계응력세기인자($K_{IC}$) 측정을 통하여 고찰하였으며, 섬유의 표면미세구조 변화와 복합재료의 파단면은 주사전자현미경(SEM)으로 관찰하였다. 또한 섬유표면에 계면처리의 여부를 확인하기 위하여 적외선 분광법(FTIR)과 X-선 광전자 분광법(XPS)을 분석하였다. 실험결과 계면처리한 섬유 표면의 -OH 기(hydroxyl)가 증가됨을 확인하였다. 계면처리한 후의 기계적 특성이 계면처리 전의 기계적 특성보다 약 ~100% 증가하였다. 이러한 결과는 표면처리에 의해 섬유와 에폭시 수지 매트릭스 사이의 계면결합력을 증가시킨 것으로 판단된다.

• Composites Research
• /
• 제18권3호
• /
• pp.31-37
• /
• 2005

본 연구에서는 나노섬유로 강인화된 복합재료를 만들기 위해 전기방사방법을 이용해서 폴리에틸렌옥사이드 (PEO) 나노섬유를 제조하였고, 제조된 복합재료와의 기계적 계면특성을 비교하기 위해 PEO 입자로 강인화된 복합재료를 제조하였다. PEO 나노섬유의 파이버 직경과 모폴로지는 주사전자현미경을 통해 관찰하였고, 복합재료의 기계적 계면특성은 파괴인성 $(K_{IC})$과 층간 전단 강도실험 (ILSS)을 통하여 알아보았다. 실험결과, 인가전압이 증가될수록 파이버의 직경은 감소하였고. 고전압에서 제트 불안정성의 증가로 인해서 최적의 섬유구조는 15 kV에서 얻을 수 있었다. PEO 나노섬유로 강인화된 에폭시 복합재료는 파괴인성인자 값인 $K_{IC}$와 ILSS가 PEO 입자로 강인화된 복합재료보다 향상된 값을 나타내었다. 이는 나노섬유가 입자에 비해 높은 비표면적과 aspect ratio를 가짐에 따라 복합재료의 기계적 계면특성을 향상시키는데 중요한 역할을 하는 것으로 판단된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.182-185
• /
• 2004

In this work, the effect of chemical treatments on surface properties of SiC was investigated in mechanical interfacial properties of carbon fibers-reinforced composites. The surface properties of the SiC were determined by acid/base values and contact angles. The thermal stabilities of carbon fibers-reinforced composites were investigated by thermogravimetric analysis (TGA). Also, the mechanical interfacial properties of the composites were studied in interlaminar shear strength (ILSS) and critical strain energy release rate mode II $(G_{IIC})$ measurements. As a result, tile acidically treated SiC (A-SiC) had higher acid value than that of untreated SiC (V-SiC) or basically treated SiC (B-SiC). According to the contact angle measurements, it was observed that chemical treatments led to an increase of surface free energy of the SiC surfaces, mainly due to the increase of the specific (polar) component. The mechanical interfacial properties of the composites, including ILSS and $(G_{IIC})$, had been improved in the specimens treated by chemical solutions. These results were explained that good wetting played an important role in improving the degree of adhesion at interfaces between SiC and epoxy resin matrix.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.15-25
• /
• 2018

Post-construction subgrade settlement especially differential settlement, has become a key issue in construction and operation of non-ballasted track on high-speed railway soil subgrade, which may also affect the dynamic performance of passing trains. To estimate the effect of differential subgrade settlement on the mechanical behaviors of the vehicle-slab track system, a detailed model considering nonlinear subgrade support and initial track state due to track self-weight is developed. Accordingly, analysis aiming at a typical high-speed vehicle coupled with a deteriorated slab track owing to differential subgrade settlement is carried out, in terms of two aspects: (i) determination of an initial mapping relationship between subgrade settlement and track deflections as well as contact state between track and subgrade based on a semi-analytical method; (ii) simulation of dynamic performance of the coupled system by employing a time integration approach. The investigation indicates that subgrade settlement results in additional track irregularity, and locally, the contact between the concrete track and the soil subgrade is prone to failure. Moreover, wheel-rail interaction is significantly exacerbated by the track degradation and abnormal responses occur as a result of the unsupported areas. Distributions of interlaminar contact forces in track system vary dramatically due to the combined effect of track deterioration and dynamic load. These may not only intensify the dynamic responses of the coupled system, but also have impacts on the long-term behavior of the track components.

• The Korean Journal of Pain
• /
• 제20권1호
• /
• pp.46-49
• /
• 2007

Background: Cervical epidural injection, performed via the interlaminar approach, represents a useful interventional pain management procedure indicated in patients with a cervical herniated disk. Due to thedecreased epidural space in the cervical region, cervical epidural injections may result in potentially serious complications, especially during a large volume injection. Methods: Thirty-four patients with neck pain due to a cervical herniated disk that were referred to the pain clinic for cervical epidural steroid injection were randomized into two groups. One group received a cervical epidural injection of 4 ml drug and the other group received 2 ml drug. The injected mixture included triamcinolon, ropivacaine and omnipaque. Spread levels of the drug after injection were estimated with the use of C-arm fluoroscopy. Results: Spread levels to the cephalad for patients in the two groups were $4.88{\pm}0.78segments$ and $4.53{\pm}0.49segments$, respectively. Spread levels to the caudad for patients in the two groups were $4.59{\pm}0.93segments$ and $4.47{\pm}0.51segments$, respectively. The results showed no significant difference in the spread level between the two groups. Conclusions: Use of a small volume of drug (2 ml) can provide a sufficient spread level of the injected drug that is desirable for patients with a cervical herniated disk.

• The Korean Journal of Pain
• /
• 제26권1호
• /
• pp.21-26
• /
• 2013

Background: Postherpetic neuralgia (PHN) is a serious complication resulting from herpes zoster infections, and it can impair the quality of life. In order to relieve pain from PHN, various treatments, including pharmacological and interventional methods have been used. However, little information on the recommendations for the interventional treatment of PHN, along with a lack of nation-wide surveys on the current status of PHN treatment exists. This multicenter study is the first survey on the treatment status of PHN in Korea. Methods: Retrospective chart reviews were conducted on the entire patients who visited the pain clinics of 11 teaching hospitals from January to December of 2011. Co-morbid disease, affected site of PHN, routes to pain clinic visits, parenteral/topical medications for treatment, drugs used for nerve block, types and frequency of nerve blocks were investigated. Results: A total of 1,414 patients' medical records were reviewed. The most commonly affected site was the thoracic area. The anticonvulsants and interlaminar epidural blocks were the most frequently used pharmacological and interventional methods for PHN treatment. For the interval of epidural block, intervals of 5 or more-weeks were the most popular. The proportion of PHN patients who get information from the mass media or the internet was only 0.8%.The incidence of suspected zoster sine herpete was only 0.1%. Conclusions: The treatment methods for PHN vary among hospitals. The establishment of treatment recommendation for PHN treatment is necessary. In addition, public relations activities are required in order to inform the patients of PHN treatments by pain clinicians.

• Journal of Korean Neurosurgical Society
• /
• 제60권5호
• /
• pp.485-497
• /
• 2017

Surgical treatment of the degenerative disc disease has evolved from traditional open spine surgery to minimally invasive spine surgery including endoscopic spine surgery. Constant improvement in the imaging modality especially with introduction of the magnetic resonance imaging, it is possible to identify culprit degenerated disc segment and again with the discography it is possible to diagnose the pain generator and pathological degenerated disc very precisely and its treatment with minimally invasive approach. With improvements in the optics, high resolution camera, light source, high speed burr, irrigation pump etc, minimally invasive spine surgeries can be performed with various endoscopic techniques for lumbar, cervical and thoracic regions. Advantages of endoscopic spine surgeries are less tissue dissection and muscle trauma, reduced blood loss, less damage to the epidural blood supply and consequent epidural fibrosis and scarring, reduced hospital stay, early functional recovery and improvement in the quality of life & better cosmesis. With precise indication, proper diagnosis and good training, the endoscopic spine surgery can give equally good result as open spine surgery. Initially, endoscopic technique was restricted to the lumbar region but now it also can be used for cervical and thoracic disc herniations. Previously endoscopy was used for disc herniations which were contained without migration but now days it is used for highly up and down migrated disc herniations as well. Use of endoscopic technique in lumbar region was restricted to disc herniations but gradually it is also used for spinal canal stenosis and endoscopic assisted fusion surgeries. Endoscopic spine surgery can play important role in the treatment of adolescent disc herniations especially for the persons who engage in the competitive sports and the athletes where less tissue trauma, cosmesis and early functional recovery is desirable. From simple chemonucleolysis to current day endoscopic procedures the history of minimally invasive spine surgery is interesting. Appropriate indications, clear imaging prior to surgery and preplanning are keys to successful outcome. In this article basic procedures of percutaneous endoscopic lumbar discectomy through transforaminal and interlaminar routes, percutaneous endoscopic cervical discectomy, percutaneous endoscopic posterior cervical foraminotomy and percutaneous endoscopic thoracic discectomy are discussed.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.81-88
• /
• 2018

Seismic isolation systems have typically been used in the form of base seams in mid-rise and low-rise buildings. In the case of high-rise buildings, it is difficult to apply the base isolation. In this study, the seismic response was analyzed by changing the installation position of the seismic isolation device in 3D high - rise model. To do this, we used 30-story and 40-story 3D buildings as example structures. Historic earthquakes such as Mexico (1985), Northridge (1994) and Rome Frieta (1989) were applied as earthquake loads. The installation position of the isolation device was changed from floor to floor to floor. The maximum deformation of the seismic isolation system was analyzed and the maximum interlaminar strain and maximum absolute acceleration were analyzed by comparing the LB model with seismic isolation device and the Fixed model, which is the base model without seismic isolation device. If an isolation device is installed on the lower layer, it is most effective in response reduction, but since the structure may become unstable, it is effective to apply it to an effective high-level part. Therefore, engineers must consider both structural efficiency and safety when designing a mid-level isolation system for high-rise buildings.

• The Korean Journal of Pain
• /
• 제32권4호
• /
• pp.264-270
• /
• 2019

Background: To develop a rabbit epidural steroid injection (ESI) model for analyzing steroid retention in the tissue, and to assess the difference in steroid retention in the model according to the location and time elapsed after ESI. Methods: Fluoroscopy-guided ESI was performed using the interlaminar approach between the lowest two lumbar segments in 13 female New Zealand white rabbits. Four rabbits were allocated to each of three different groups according to the time of sacrifice: 3, 7, and 15 days post-ESI; the remaining rabbit was sacrificed immediately post-ESI to obtain baseline data. After sacrifice, two segments were harvested: the lowest two lumbar vertebrae and another two lumbar vertebrae immediately above these. The residual steroid amount (RSA) and residual steroid concentration (RSC) in the collected spinal columns were analyzed. A linear mixed model was used to compare RSAs and RSCs between the injected and adjacent segments, and among the number of days until sacrifice; P < 0.05 was considered statistically significant. Results: Both RSA and RSC of the injected segment were significantly higher than those of the adjacent segment (P < 0.001, both). The RSA and RSC significantly decreased over time (P = 0.009 and P = 0.016, respectively). Conclusions: The developed rabbit ESI model verified that significantly more steroid was retained at the injected segment than at the adjacent segment and the residual steroid decreased over time. This model could be useful not only for comparing current steroid medications, but also for developing new, better steroid formulations.

• Composites Research
• /
• 제31권6호
• /
• pp.304-310
• /
• 2018

오토클레이브 (Autoclave) 성형 공정은 항공산업분야의 복합재 부품 제작에 있어서 매우 안정적이고 중요한 제조방법으로서 자리매김 해왔었지만 오토클레이브가 가진 많은 장점과 함께 단점 또는 제약 사항들을 보여주고 있다. 최근에는 이러한 한계를 극복하기 위하여 다양한 탈 오토클레이브 (OoA, Out-of-Autoclave) 공정들이 연구 개발되고 있는데, 본 연구에서는 탈 오토클레이브 공정 중 하나로서 많은 관심을 받고 있는 액상성형공정 (Liquid Composite Molding)을 사용하여 시편들을 제작하고 이를 오토클레이브 공정으로 제작된 시편과 실험적으로 비교평가하였다. 액상성형공정 중 DB (Double Bagging), CAPRI (Controlled Atmospheric Pressure Resin Infusion) 및 VAP (Vacuum Assisted Process) 공정을 사용하여 시편 제작을 수행하고 내부 기공 함유량, 두께, 유리전이온도, 층간전단강도 및 굽힘강도 시험 평가를 통하여 각 제작 공정에 따른 차이를 확인할 수 있었다. 전체적으로 오토클레이브 성형 시편이 우수한 두께 균일도, 낮은 기공 함유량 및 양호한 기계적 강도 특성을 보였으며, 액상성형공정 중에서는 CAPRI 성형 시편이 DB 및 VAP 성형 시편에 비하여 상대적으로 우수한 특성을 가짐을 확인하였다.