• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.129-134
• /
• 2009

This study is on the development of photogrammetric methode for measuring the size of object without control points. The model is composed of interior orientation parameters, which are consist of specifications of CCD camera and lens distortion parameters, and exterior orientation parameters, which are calculated through relative orientation and scale adjustment. We evaluated the accuracy of the model to find that it is possible to measure the size of object using the model.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.17 no.1
• /
• pp.1-15
• /
• 2004

The different growth steps of human show the different energetic phenomenon such as the strength of triple energizer, the sale of extra meridian, and the stability of 12 meridians. So we have to understand the physiological and pathological phenomena on this point of view. Especially atopic dermatitis means the loss of adaptability under the lack of genuine energy. If you approach to this disease not with any perception of excess or deficiency of the human genuine energy but with simple symptom enumeration or partial diagnosis, it will be dangerous. So we must approach to this disease with more concrete and objective body-centered standard. Thus when we cure and diagnose infants with this disease, we should focus on stablizing the "Energy of Earth(土)" digestive ability, under the consideration of inducement to the enough "Byun-Jeung-Hu(變蒸候)" and the function of Triple Energizer. Through this process we can lead infants to the beginning equipment state(始全). Until 7 years old, we should stabilize the Link Vessel(維脈) by clarifying interior and exterior classification of Nutritive Element and Defensive Energy to control the child's energy of metal(金), water(水), wood(木) and fire(火) in the basis of the energy of earth(土). And also we should stabilize the Heel Vessel(？脈) through the Water and Fire complement each other to control the movements and to control sleep and awakening. Through this process, we can lead children to the basal equipment state(本全). After then, until adolescent phase, we should control 12 meridian and 8 extra meridian by leading vital function to be harmonized and prosperous on the basis of the meridian to reach the mature equipment state(旣全). Adult atopic dermatitis should be controlled through conciliation between meridian and internal organs by differentiating male from female.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2067-2072
• /
• 2016

Recently, due to the development of attack techniques that can circumvent existing information protection systems, continuous threats in a form unrecognized by the user have threatened information assets. Therefore, it is necessary to support the prompt responses to anticipated attempts of APT attacks, bypass access attacks, and encryption packet attacks, which the existing systems have difficulty defending against through a single response, and to continuously monitor information protection systems with a defense strategy based on Indicators of Attack (IOA). In this paper, I suggest a centralized intelligent information protection system to support the intelligent response to a violation by discerning important assets through prevention control in a performance impact assessment about information properties in order to block the attack routes of APT; establishing information control policies through weakness/risk analyses in order to remove the risks in advance; establishing detection control by restricting interior/exterior bypass networks to server access and monitoring encrypted communications; and lastly, performing related corrective control through backup/restoration.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.85-92
• /
• 2015

This study examined the settlement of a 1-2W type greenhouse using a timber pile, which was recently established on Gyehwa-do reclaimed land, in order to obtain base data for the construction of a greenhouse on reclaimed land. The results of this study are as follows. foundation and timber pile increased over time, irrespective of the interior and exterior of the upon investigation of the ground, it was confirmed that there was no soft rock stratum (bedrock), and that a sedimentary stratum existed under the fill deposit, which is estimated to have been reclaimed during the site renovation. It was also found that a weathered zone was located under the fill deposit and sedimentary stratum, and that the soil texture of the entire ground floor consisted of clay mixed with sand, silty clay, and granite gneiss, in that order, regardless of boreholes. In addition, the underground water level was 0.3m below ground, regardless of boreholes. Despite a slight difference, the settlement of the greenhouse or measurement sites (channels). With regard to the pillar inside the greenhouse, except in the case of CH-2, the data at a site located on the side wall of the greenhouse (wind barrier side) indicated vibrations of relatively larger amplitude. Moreover, the settlement showed a significant increase during a certain period, which was subsequently somewhat reversed. Based on these phenomena, it was verified that the settlement range of each site in the interior and exterior of the greenhouse was between 1.0 and 7.5mm at this time, except in the case of CH-1. The results of the regression analysis indicated good correlation, with the coefficient of determination by site ranging between 0.6362 and 0.9340. Furthermore, the coefficient of determination ranged between 0.6046 and 0.8822 on the exterior of the greenhouse, which is lower than inside the greenhouse, but still indicates significant correlation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.247-258
• /
• 2017

Since 2016 when the regulations related to vehicle structure and device modification were drastically revised, the car tuning market has been growing rapidly. Particularly, many drivers are showing interest in changing the interior and exterior according to their preference, or improving the specifications of their cars by changing the engine and powertrain, among others. Also, as the initial engine settings such as horse power and torque of the vehicle are made for stable driving of the vehicle, it is possible to change the engine performance, via Engine Control Unit (ECU) mapping, to the driver's preference. However, traditionally, ECU mapping could be only performed by professional car engineers and the settings were also decided by them. Therefore, this study proposed a system that collects data related to the driver's driving habits for a certain period and sends them to a cloud server in order to analyze them and recommend ECU mapping values. The traditional mapping method only aimed to improve the car's performance and, therefore, if the changes were not compatible with the driver's driving habits, could cause problems such as incomplete combustion or low fuel efficiency. However, the proposed system allows drivers to set legally permitted ECU mapping based on analysis of their driving habits, and, therefore, different drivers can set it differently according to the vehicle specifications and driving habits. As a result, the system can optimize the car performance by improving output, fuel efficiency, etc. within the range that is legally permitted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6673-6678
• /
• 2015

Recently, the free form buildings are constructed frequently. Exterior and interior components of these buildings have the free cross-section and a curved shape. So, There are many usages of classical finite element having tapered section and free-style shape. Some general commercial applications like ETABS, SAP2000, MIDAS are usually used for the safety evaluation of the free form structures. However, there are some limits in the accuracy of structural analysis and the length of analysis time because a very complicated finite element mesh have to be used. Therefore, In this study, a pre and post program module was developed to take advantage of general 3-D curved beam element which has a free-style curved shape and mathematical backgrounds. Pre-post processing module has been developed in this study was developed to control the curvature of the curved members by the NURBS control points. As a result, fast geometric modeling than was possible commercial applications. In addition, realistic depiction of the shape and behavior patterns were possible because of the free-form building allows visual check of the free form.

• Journal of Korea Water Resources Association
• /
• v.56 no.7
• /
• pp.461-470
• /
• 2023

The purpose of this research is to derive the optimal temperature, location, and heating control system for a tipping bucket rain gauge heating system used for observing snowfall during winter. We conducted indoor and outdoor experiments by manufacturing a tipping bucket rain gauge that can be variably controlled for heating at the funnel, exterior, and interior, and indoor and outdoor. The indoor experiments involved using a temperature and humidity chamber to compare the performance and derive the appropriate temperature of the precipitation gauge heating system. Subsequently, the outdoor experiments were carried out at the Cloud Physics Observation Center located in Daeguallyeong, heavy snowfall region, to validate the findings. The analysis result was derived that the heating temperature of the funnel should be set at the 10 to 30℃, while the internal heating temperature should be 70℃. Furthermore, the optimal locations for the heating devices, which aim to minimize measurement delay, were identified as the exterior of the rain gauge, the rim of the funnel, and the vertical surface of the funnel. Our result shows that used as the basis for the operating conditions of precipitation gauge heating systems for solid precipitation measurement in winter.

• Fashion & Textile Research Journal
• /
• v.19 no.2
• /
• pp.109-120
• /
• 2017

In the textile industry located in Gyeonggi-do, 85% of small-sized firms have less than 10 employees; in addition, the most of them are characterized by a vendor relying specialization system that conducts foundry from the vendor that managed marketing, textile design development, and quality checks according to unit stream. The breakaway of these vendors accelerated over the last 7 years; however, industry survival is at stake because the specialization system and orders have collapsed. The following four main policies must be implemented to overcome industry hardship. Policies have been derived from survey and analysis (present condition and trends) from industrial statistics and related policies in advanced and developing countries. First, a policy to promote cooperation between small-sized foundry unit-streams. Second, unification of the marketing support function with a textile design and development support system. Third, the introduction of policy support-management system customized according to developmental stages (tall process${\rightarrow}$fabric production${\rightarrow}$sales${\rightarrow}$clothing production sales). Fourth, foundation of a control tower that puts these tasks in a vehicle and runs them and the division of roles with the central government. We must propel main tasks to manifest the developmental potential (develop eco-friend dyeing and processing technologies, change to the young next CEO in business environment, and grow the of knit market) of the Gyeonggi Textile Industry in a short period to present a condition where these four main policies are running.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.555-562
• /
• 2019

This paper presents soil deformation measurement in model chamber based on photogrammetry. We created an aluminum framed acrylic model chamber with soil inside and applied photogrammetry to measure soil deformation caused by loading tests. The soil consists of 40% black and 60% regular sand to create image contrast in soil images. In preprocessing, the self camera calibration was carried out for IOPs (Interior Orientation Parameters), followed by the space resection to estimate EOPs (Exterior Orientation Parameters) using control points located along the aluminum frame. Image matching was applied to measure the soil displacement. We tested different matching window sizes and the effect of image smoothing. Experimental results showed that 65x65 pixels of window size produced better soil deformation map and the image smoothing was useful to suppress the matching outliers. In conclusion, photogrammetry was able to efficiently generated soil deformation map.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.4
• /
• pp.232-241
• /
• 2003

The interaction of incident monochromiatic waves with N bottom-mounted porous circular cylinders is investigated in the frame of three-dimensional linear potential theory. The fluid domain is divided into N+l regions i.e. a single exterior region and N interior regions, and the diffraction potential in each fluid region is expressed by an eigenfunction expansion method (Williams and Li,2000). The analytic results show that the porous structure reduces both the wave forces and the run-up wave around the cylinder. To verify the developed model, the systematic model test with a line array of porous cylinders is conducted at the wave tank (30m$\times$7m$\times$1.5m). The analytic results are in good agreement with the experimental results within measured frequency range. It is concluded that the breakwater constructed with an array of porous circular cylinders shows the performance of an effective wave barrier together with the seawater-exchange effect and is considered to have vast potentials for the use of seawater-exchanging breakwater in the future.