• Conservation Science in Museum
• /
• v.20
• /
• pp.1-12
• /
• 2018

In February 1986, a high-school student reported the discovery of fragments of gilt-bronze burial goods on a mountainside behind a village in Ipjeom-ri, Ungpo-myeon in Iksan. The National Research Institute of Cultural Heritage immediately undertook an excavation. Unfortunately, gilt-bronze relics including a band and vertical decorations for a crown, a hat, and shoes had already been collected from Ipjeom-ri Tomb 1 by the student who found them before they could be properly excavated. Also, the interior of the stone chamber of the tomb had been severely disturbed by the time of excavation, making it difficult to identify the precise original locations of the relics within the tomb and hindering the reassembly of the fragments of the gilt-bronze crown. After conservation treatment, the gilt-bronze hat, shoes, and other relics were restored to their original forms and researchers were able to identify incised designs of a three-legged bonghwang(鳳凰), fish scales, lotus flowers, and other motifs. This study presents the major features of the fragments of gilt-bronze relics from Ipjeom-ri Tomb 1 and the methods of their production in order to provide basic material for their restoration and allow the eventual restoration of the giltbronze crown to its original condition.

• KIEAE Journal
• /
• v.15 no.5
• /
• pp.107-112
• /
• 2015

Purpose: This study desires to investigate an effect of indoor temperature, humidity, and illuminance targeting a planting system of double-skin facade and cavity space adjacent to the outside within a certain period of winter. Through this, the study suggests a basic material about an energy conservation effect of double window system using planting to reduce heating load of a building in winter, so desires to contribute to indoor thermal comfort effect and illuminance correction study of double window and indoor plant. Method: Considering effects such as day and night climatic elements and air conditions in winter, illuminance measurement was conducted through a double-skin facade of space, a subject of the measurement, on the basis of practical residence time of a resident, and this study analyzed characteristics of indoor illuminance about this. The study measured and compared a change of insolation, dry-bulb temperature, and relative humidity at each indoor-outdoor measuring point, so measured and compared characteristics of an indoor temperature effect by elements of double-skin facade and indoor plant. Result: Through this study, the researcher could determine that indoor plant within double window in winter not only blocks solar radiation but also photosynthesizes, so is somewhat disadvantageous to winter thermal comfort reducing heating load. In addition, solar radiation going through interior plays a role to bring down somewhat high humidity to about 50% of reasonable humidity, so plays a direct role of maintenance of comfortable indoor space. Although there are effects such as blocking of solar radiation and temperature reduction, this has a positive influence on humidity control and proper illuminance distribution. The researcher could determine that illuminance, temperature, and humidity by solar radiation penetration for the whole measuring time play a role to supplement indoor environment mutually.

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.110-116
• /
• 2016

The rapid expansion of buildings and paved roads increases the risk of flood disaster in an urban area. One of the solutions can be the use of permeable pavements. This study evaluated the permeability of permeable blocks used for the roadway pavement. Joint fillers and mat sands of the investigated blocks met the corresponding standards. The flexural strength of the blocks was 5.29 MPa to meet these standards. Based on interior permeability test results after pollution, the four products evaluated were categorized into the following three levels: One for the $1^{st}$ level, one for the $2^{nd}$ level and two for the $3^{rd}$ level. From the field permeability test and pervious concrete infiltration test results nine months after their construction, all the products except one passed the quality standards of 0.1 mm/s.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1585-1590
• /
• 2012

Engineering plastics are used in instrument panels, interior trim, and other vehicle applications, and the thermomechanical behaviors of plastic materials are strongly influenced by many environmental factors such as temperature, sunlight, and rain. As the material properties change, the mechanical parts create unexpected noise. In this study, the dynamic mechanical property changes of plastics used in automobiles are measured to investigate the temperature effects. Viscoelastic properties such as the glass transition temperature and storage modulus and loss factor under temperature and frequency sweeps were measured. The data were compared with the original ones before aging to analyze the behavior changes. It was found that as the temperature increased, the storage modulus decreased and the loss factor increased slightly.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.457-462
• /
• 2010

Sound absorption capability and bending strength of laminated ship-building plywood waste of maple and melanti wood were estimated. Sound absorption coefficients of wood had been measured by the two microphone transfer function method and bending strength examined by three point loading. The maximum strength in bending of laminated ship-building plywood waste of maple and melanti wood were 534 and 414 kgf/$cm^2$, respectively. The sound absorption coefficients of laminated ship-building plywood waste were higher than mongolian oak and fiber board, well used construction material. Especially, in the case of laminated ship-building plywood waste of melanti wood, average sound absorption coefficient was about 0.25. It was surmised that the laminated ship-building plywood waste can be used as interior materials because of its good mechanical and sound absorption properties.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.29-36
• /
• 2009

Recycling of wood wastes or residues is a good solution for a shortage of wood resources and a rise in the price. Shipbuilding wood wastes were almost used to produce the boards by milling. However, considering the economic value and insufficient resource, recycling with milling is dissatisfied method. This study has been carried out to investigate the recycling possibility of shipbuilding wood waste. There are two kinds of shipbuilding wastes: plywood waste and solid waste. From the results of this study, the following conclusions have been made: 1. Bending properties of plywood and laminated plywood lumber were tested by Korean Standard. 2. The main fracture mode of plywood waste and laminated plywood lumber is that of simple tension. 3. The recommended application for the recycling of shipbuilding wood waste are outdoor wood furnishings, indoor wood furnishings and some wooden building construction materials: interior raw material, wooden pallet, siding, paneling, flooring. picnic table, deck components, porch swing, landscaping timbers, residential fencing, patios, and boardwalks etc.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.152-162
• /
• 2005

Coolant rubber hoses for automobile radiators can be degraded and thus failed due to the influence of contacting stresses of air and coolant liquid under the thermal and mechanical loadings. In this study, test analysis was carried out for evaluating the degradation and failure mechanisms of coolant hose materials. Two kinds of EPDM rubber materials applicable to the hoses were adopted: commonly-used ethylene-propylene diene monomer(EPDM) rubbers and EPDM rubbers with high resistance against electro-chemical degradation (ECD). An increase of surface hardness and a large reduction of failure strain were shown due to the formation of oxidation layer for the specimens which had been kept in a high temperature air chamber. Coolant ageing effects took place only by an amount of pure thermal degradation. The specimens degraded by ECD test showed a swelling behavior and a considerable increase in weight on account of the penetration of coolant liquid into the skin and interior of the rubber specimens. The ECD induced material softening as well as drastic reduction in strength and failure strain. However EPDM rubbers designed for high resistance against ECD revealed a large improvement in reduction of failure strain and weight. This study finally established a procedure for reliability analysis and evaluation of the degradation and failure mechanisms of EPDM rubbers used in coolant hoses for automobile radiators.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5721-5727
• /
• 2015

Paint must be resistant to the wear and tear of the atmosphere and should maintain its color and finish for a long time. The solvents of paints were organic solvent and water, common artificial source of VOCs(Volatile organic Solvent) include organic solvent. Using of organic solvent paint was decreased in the interior parts of automotive, exterior parts were still used organic solvent paint. Adhesive strength of water-paint was poor to compare with organic solvent paint and peeled off from the base materials, it was big quality problem. In this study, adhesive characteristics of water-paint and silane mixture was investigated. To improve adhesive strength of water-paint, it was necessary to mixing of adhesive material. Adhesive strength was measured using UTM(Universal Test Instrument) by ASTM D1002 and Peeling off condition was by ASTM D3359. Optimal mixing condition of water-paint and silane adhesive were $25^{\circ}C$, 500rpm, 20min., concentration of silane adhesive was 5 wt%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3280-3286
• /
• 2009

In this paper, we designed and manufactured HD Switch Panel parts with micro-etched pattern. By using CAE analysis, we could predict weld-line positions and the amount of shrinkage during injection molding process. We measured the temperature distribution of the mold surface so that we could optimize the processing conditions such as mold temperature. In order to increase the transcription of micro-etched pattern, we applied the E-Mold technology and evaluated the effect of mold temperature on the surface quality. We concluded that the etched pattern was improved(more than 2.5$\to$1.5~1.7) through the measurement of surface gloss and the observation of both SEM and SPM images.

• Archives of design research
• /
• v.4 no.1
• /
• pp.61-73
• /
• 1991

The exhibition activity that a company is rendering to their consumers for the purpose of advertisement, sales promotion and enhancement of company inage get more and more internationalized and specialized. A company is changing from mass production system to small quantity production of various kinds to meet consumer's individualization and differentiation. Also, a company is experiencing a major change in their marketing strategy. As the society is entering on Information Age, the contents that a company intends to give consumer may be different individually. If a consumer is informed wrong information of the goods, a company needs a place to meet consumer face to face where the consumer feels and understands the substance of the goods. This is the current characteristics of Exhibition Media. Based on the result of the current Special Exhibition home and abroad along with background and characteristics of special Exhibition, this study sets a following task reflecting the general trend of social, cultural and economic atmosphere. First, Current Exhibition Industry will be diversified into more Specialized Exhibition, while our Exhibition Industry is very shaky under severe international competition. Also, Exhibition Plan that involves with architecture, interior, graphic, industrial design and advertisement, etc., needs international competitiveness while enhancing identity of Exhibition Plan along with comprehensive marketing strategy in the future. Second, Among most of the local special Exhibitions which invite the general public are normally invited for company public relation contrary to those of U.S.A. and Europe. This signifies of our industrial and social structure's by-product. As the future exhibition become Information Com$$\mu$ication Exhibition which requires specialized technical explanation, the correct description of the goods should be set as a Judgement basis of Exhibition Plan. Third, In parallel with increase of the Exhibition, the equipment expenses of a company goes up continuously. In view of this, a study $$\mu$t be oriented for re-use and curtailment of expenditure of those equipment. Also, as the use of Assembly System B on the rise as a result of diversification of special Exhibition, a study on the development of new material & design for Exhibition Equipment only B required.