• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.140-155
• /
• 2020

The purpose of this study is to examine historical wall repair details through analysis of repair data and administrative documents of the Paradise Conservation of Gangjin Muwisa Temple. In addition, the purpose of the project is to examine the differences and commonalities between the materials and construction technology used in the building's walls. The data for repair work conducted in 1935, 1956, and 1982~3 was analyzed and the results of the research were as follows. First, data for the wall construction conducted in 1935 during the dismantling repair showed that the interior structure of the wall was found to follow that of the original, but the first, second, and final layers used different materials. The composition material of the wall consisted of clay, lime and sand, the second layer used sand and plaster, and the last layer used plaster and seaweed paste. Second, the structure of the wall interior, which was found during the 1956 repairs, consisted of wood woven horizontally and vertically. It was confirmed that this had been installed diagonally using a rope. Third, the 1982~3 repair work confirmed that the wall's interior construction conformed to the original method. The lime-sand wall was formed by mixing slacked lime, sand, soil, fodder, and seaweed grass. Fourth, when the various repairs are considered as a whole, it is clear that the interior structure of the wall was made more than 1900 years ago, and the material used in the wall changed in 1935. Fifth, the materials used for each repair differed, but each project had a common view of cultural heritage repair principles in sections that stated the significance of each project.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.21-25
• /
• 2004

This study deals with the characteristics of wire-cut EDM(Electrical Discharge Machining)process in aluminum alloys. Besides 2 series and 7 series of aluminum alloys for aerospace applications, porous aluminum is tested, which is used for sound absorbing matherial and interior and exterior material of building. Jinyoung JW-30 wire cutting machine was used in this experiment. Tap wate passed a filter and ionization was used as the discharging solution. An immerision method was applied as a cooling method because it separates chips effectively and machinability is good even with low value of electric current. The speed of fabrication was estimated by measuring the travel distance of the work piece and time spent for the movement. As pulse-on-time increased the fabrication speed decreased. On the other hand, as peak voltage of peak current increased the fabrication speed increased. In general 7075 aluminum alloy resulted in higher fabrication speed.

• Journal of the Korean housing association
• /
• v.15 no.4
• /
• pp.75-86
• /
• 2004

This research is about the Korean private residence as the actual housing published in Kuchie, 'Chosun and Architecture'. Research about the Korean private residence during the Japanese colonial period is important to find out the influence of foreign culture on Korean housing during that period. This research is necessary to reveal the tendency of modernization of Korean housing and how the foreign cultural relationship transformed and applied to the Korean housing. This research was carried out mainly on the 16 Korean private residences published in 'Chosun and Architecture'. The main subject of this research is to analyze the architectural floor plan, building material and heating facilities etc. Other important themes of the research are the practical side of actual housing plan, interior furnitures and fittings, electrical fittings and the classification of life style.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.898-902
• /
• 1999

During summer season, the weather condition of Korea is hot and humid. So humidity elements are very important relating to building envelope condition. The purpose of this investigation is to measure and analyze characteristics of summer's environmental elements such as relative humidity, dry bulb temperature and air velocity in the clay/cement envelope materials using a granite dome model. According to the variation of exterior humidity, the state of interior relative humidity for clay model has an equal tendency, although a little range of variation is shown in comparison to the cement model.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.9-14
• /
• 2020

In order to realize high strength and light weight for various industrial facilities and structural materials, various new materials are applied to product design. Among them, CFRP has excellent specific strength and non-rigidity, and the scope of use is expanding throughout the industry, such as mobility products and building materials. GFRP is cheaper than CFRP, and has excellent specific strength and non-rigidity, and has excellent heat resistance and sound insulation, so it has been adopted as a core material for flooring and interior flooring. CFRP of twill weave structure has better resistance to deformation of fiber than plain weave structure, so the outermost layer is applied as twill weave structure in product design. After fabrication with DCB specimens, Mode I fracture toughness was evaluated according to the crack length. As the crack length increases, the energy release rate and stress intensity factor values tended to decrease overall.

• Geomechanics and Engineering
• /
• v.33 no.4
• /
• pp.415-425
• /
• 2023

Pile-supported wharves, port structures that support the upper deck, are installed on sloping ground. The sloping ground should be covered with a rubble mound or artificial blocks to protect the interior material from erosion caused by wave force. The behavior of the pile may vary during an earthquake if a rubble mound is installed on the slope. However, studies evaluating the effect of rubble mound on the pile during an earthquake are limited. Here, we performed dynamic centrifuge model tests to evaluate the dynamic behavior of piles installed in a slope reinforced with rubble mound. In the structure, some sections (single-pile, 2×2 group-pile) were selected for the experiment. The moment of the group-pile decreased by up to 26% upon installation of the rubble mound, whereas the moment of the single-pile increased by up to 41%, thus demonstrating conflicting results.

• KSBB Journal
• /
• v.32 no.3
• /
• pp.174-178
• /
• 2017

Fungal mycelium-based composite materials (FMBC) are a new biomaterial to replace the existing composite materials. To compete with lightweight, high-performance composite materials represented by fiber-reinforced plastic (FRP), various physical and chemical properties and functionality must be secured. Especially, the composite materials made by using mycelium of mushroom is called mushroom plastic. Currently, Ecovative, Grado Zero Espace and MycoWorks in USA and Europe are launching new products. Products utilizing FMBC can be launched in the market for construction materials, automobile interior materials and artificial leather substitutes. In spite of this high possibility, mass production using FMBC has not yet been reported. This review introduces the FMBC, a material that can replace existing plastics, inorganic building materials and animal skins in an environmentally and economically viable way, and looks at the possibility of future biomaterials by summarizing recent research contents.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.3
• /
• pp.227-234
• /
• 2017

This research analyzes the properties of mortar following the rise in water-cement ratio and applicability as an eco-friendly construction supply by using the mudflats of a dredged arena as a substitute for aggregate. The results of a experiment of the flow showed that the flow value decreases as the amount of mudflats increases. A test for chloride content showed that the chloride content increases with the amount of mudflats. In the compression of specimen mixed with mudflat and the testing of tensile strength, the strength weakened as the addition ratio of mudflats rose. However, with 14-day strength as the standard, most specimen showed more strength than the plain, and 14-day strength was higher than 28-day strength. It appears to be experimental error in the mixing process from the viscosity and cohesion of mudflats, and it is considered that there will be a need for an experiment on mixing methods of mudflats in the future. The compressive strength of this research was the strongest with 70% in water-cement ratio, and the tensile strength was strongest with 80% in water-cement ratio. In the evaluation of surface analysis, 70% water-cement ratio, which is finest in strength, mixing, and compactness, was selected to analyze the roughness of the surface, and the results showed that the surface became smoother as the addition ratio of mudflats increases. In conclusion, it appears that 70% water-cement ratio is the optimal mixing ratio for mortar and 10 to 30% addition ratio of mudflats the optimal ratio. It also appears that the application of interior finishing material like bricks and tiles and interior plastering material using the mudflats are possible.

• Journal of the Korean housing association
• /
• v.18 no.1
• /
• pp.61-72
• /
• 2007

The purposes of this study were to summarize the concept of well-being and well-being apartment, to grasp the present condition of apartments which were introduced with well-being elements, and to find out the consumer preferences on well-being elements for apartment planning. Library and internet surveys were performed to summarize the concept of well-being and well-being apartment and to grasp the present condition of apartments which were introduced with well-being elements. Questionnaire survey was carried out from 2nd to 22nd of June 2005, to investigate the preferences on well-being elements for apartment planning. The respondents were 250 residents who are from thirties to fifties and living in urban area. As results, respondents think that 'living for health of body and mind' about concept of well-being and 'certificated apartments by green building rating system' or 'apartments introduced ecological factor' about concept of well-being apartment. They answered that 'yes' about 'Do you have intention to buy well-being apartment?'. The elements in aspect of complex planning having the preference were revealed that promenade for complex design, ecological garden or walking space for landscape design, outdoor exercise space for outdoor design, and security system for foundation equipment. The elements having the preference in aspect of public facilities were fitness room for sports & health facility and study room for cultural facility. The preferred elements in aspect of building and unit design were roof garden for building design, multi-functional room for unit floor plan, natural surface material for interior surface, ventilation system for indoor environment, control system for home automation, and food waste machine for home electronics.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2002

As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.