• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.620-625
• /
• 2011

A simple, rapid potentiometric back titration of Isoniazid (INH) in the presence of Rifampicin (RIF) in tablets and syrups is described. The method is based on the oxidation of INH by a known excess of copper (II) ion and the back titration of unreacted copper (II) ion potentiometrically with ascorbic acid using a lab-made Copper Based Mercury Film Electrode (CBMFE). The titration conditions have been optimized for the determination of 1.0-10.0 mg of INH in pure and dosage forms. The precision and accuracy of the method have been assessed by the application of lack-of-fit test and other statistical methods. Interference was not caused by RIF and other excipients present in dosage forms. Application of the method for INH assay in tablets and syrups was validated by comparison of the results of proposed method with that of the British Pharmacopoeia (BP) method using F- and t- statistical tests of significance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.979-983
• /
• 2007

In this thesis, a strip layout drawing of LCD S/C (shield case) was prepared. In the press die, strip layout drawing is a major factor that decides the mass production of a product. The 3D CAD/CAM system was applied for the easy correction of the interference factor with other parts to be mounted. The material use ratio was enhanced to 60.17% by optimizing the blank layout and strip layout in double width array. Furthermore, the flatness of the product was made to fit the requirements by adding the bidding process intensively on the notching part where the occurrence of the change in shape is expected owing to the thin material. For the 3D CAD/CAM software, Unigraphics NX3.0 was used. The strip layout drawing was prepared in 12 processes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.884-895
• /
• 1997

The finite element analysis for the tubular alumina liner which was shrink-fitted into a heat treated high speed steel (HSS) sleeve and subjected to high inner pressure and high temperature was performed. The parameters for the analysis were the interference between the alumina and the HSS, the temperature, the inner pressure, the coefficient of friction between the alumina and the HSS, and the taper at the sleeve ends. From the analysis, it was found that the tensile hoop stresses were decreased when the end parts of the HSS sleeve were tapered and the tensile stresses were decreased as the coefficient of friction between the alumina and the HSS was decreased. Also it was found that the alumina might be used as the structural liner for high pressure and high temperature when it was shrink-fitted into a heat treated HSS sleeve.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.28-33
• /
• 2022

A pipe is a hollow, long-form part that is primarily used to transport fluids, such as liquids or gases. Pipes are used in a range of applications in different fields from mechanical purposes to architecture and electrical uses. Despite the significance owing to various usability of pipes, few studies have been conducted using the physical property test method. The tensile test is widely used as a method to check the physical properties of the pipe. The existing pipe tension test contains the possibility to cause errors, which are fractures outside the gauge distance and cross-sectional deformation of the pipe. In this study, a novel pipe tension test method using a jig is presented and pipes with various materials are tested. It is expected that the proposed method can reduce errors that occur in conventional pipes and also obtain more accurate values to enable more efficient testing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.246-251
• /
• 2014

In case of prosthesis fabrication by CAD/CAM, location, area and contour of occlusal contacts can be adjusted so more functional occlusion can be acquired. Also, errors in a manufacturing process is reduced compared to cast metal prostheses and porcelain fused metal prostheses fabricated by conventional methods such as casting and porcelain build up. Therefore, prostheses by CAD/CAM show superior occlusion accuracy. Recently, virtual articulator function has been introduced to CAD/CAM system, which reproduces mandibular movement against maxilla. Thus, it is possible to consider occlusal interference in anterior/lateral movement as well as closing movement. There have been many studies on the marginal and internal fit of prostheses using zirconia but the occlusal fit of zirconia crown fabricated by CAD/CAM has not been researched as much. In this case report, 7 zirconia crowns were designed and fabricated by CAD/CAM for total 5 patients. The models of zirconia crowns before and after occlusal adjustment during intraoral try-in were scanned for occlusal contacts, which were compared to evaluate accuracy of prostheses and understand patterns of occlusal adjustment. Most of the occlusal adjustments were done on functional cusps and slopes of zirconia crown, and the magnitude of occlusal adjustment ranged from $15{\mu}m$ to $60{\mu}m$. In the zirconia crown fabricated with CAD/CAM systems, the occlusal adjustment is a necessary procedure, so additional procedures will be needed for compensating reduced mechanical properties.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.303-312
• /
• 2022

Bridges across waterways act as interference factors, that reduce the navigable water area from the perspective of navigation safety. To analyze the safety navigational width of ships navigating bridges across waterways, the optimal traffic distribution based on AIS data was investigated, and ships were classified according to size through k-means clustering. As a result of the goodness-of-fit analysis of the clustered data, the lognormal distribution was found to be close to the optimal distribution for Incheon Bridge and Busan Harbor Bridge. Also, the normal distributions for Mokpo Bridge and Machang Bridge were analyzed. Based on the lognormal and normal distribution, the analysis results assumed that the safe passage range of the vessel was 95% of the confidence interval, As a result, regarding the Incheon Bridge, the difference between the normal distribution and the lognormal distribution was the largest, at 64m to 98m. The minimum difference was 10m, which was revealed for Machang Bridge. Accordingly, regarding Incheon Bridge, it was analyzed that it is more appropriate to present a safety width of traffic by assuming a lognormal distribution, rather than suggesting a safety navigation width by assuming a normal distribution. Regarding other bridges, it was analyzed that similar results could be obtained using any of the two distributions, because of the similarity in width between the normal and lognormal distributions. Based on the above results, it is judged that if a safe navigational range is presented, it will contribute to the safe operation of ships as well as the prevention of accidents.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.133-140
• /
• 1999

When the current optical communication system is used for the DWDM, it raise the serious interference because an interval between the adjacent channels is narrow. The FBG filter for the DWDM is able to reduce the interferences between the adjacent channels. In this paper, therefore, we find the reflection spectrums for the three types of induced index changes, that is, uniform, Gaussian apodized, and raised-cosine apodized. From the obtained results in this paper, we can see that uniform FBG does not fit, and that the smaller the maximum induced index change ${\sigma}$ is and the larger the value of parameter C in the raised-cosine apodized FBG and G in the Gaussian apodized FBG are, the fitter they are on the narrow filter for DWDM. But, we can also see that the raised-cosine apodized FBG has more excellent property than the Gaussian apodized FBG because it has the narrower maximum reflection spectrum band and the lower sidelobes than the other.

• The KIPS Transactions:PartA
• /
• v.18A no.3
• /
• pp.115-122
• /
• 2011

It is very hard to obtain a general algorithm for solution of all the constraint satisfaction optimization problems. However, if the whole problem is separated into subproblems by characteristics of decision variables, we can assume that an algorithm to obtain solutions of these subproblems is easier. Under the assumption, we propose a problem classifying rule which subdivide the whole problem, and develop backtracking algorithms fit for these subproblems. One of the methods of finding a quick solution is efficiently arrange for any order of the search tree nodes. We choose the cluster head positioning problem in wireless sensor networks in which static characteristics is dominant and interference minimization problem of RFID readers that has hybrid mixture of static and dynamic characteristics. For these problems, we develop optimal variable ordering algorithms, and compare with the conventional methods. As a result of classifying the problem into subproblems, we can realize a backtracking framework for systematic search. We also have shown that developed backtracking algorithms have good performance in their quality.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.56-63
• /
• 2004

We consider design factors for a SQUID sensor array to construct a 52-channel magnetocardiogram (MCG) system that can be used to measure tangential components of the cardiac magnetic fields. Nowadays, full-size multichannel MCG systems, which cover the whole signal area of a heart, are developed to improve the clinical analysis with high accuracy and to provide patients with comfort in the course of measurement. To design the full-size MCG system, we have to make a compromise between cost and performance. The cost is involved with the number of sensors, the number of the electronics, the size of a cooling dewar, the consumption of refrigerants for maintenance, and etc. The performance is the capability of covering the whole heart volume at once and of localizing current sources with a small error. In this study, we design the cost-effective arrangement of sensors for MCG by considering an adequate sensor interval and the confidence region of a tolerable localization error, which covers the heart. In order to fit the detector array on the cylindrical dewar economically, we removed the detectors that were located at the corners of the array square. Through simulations using the confidence region method, we verified that our design of the detector array was good enough to obtain whole information from the heart at a time. A result of the simulation also suggested that tangential-component MCG measurement could localize deeper current dipoles than normal-component MCG measurement with the same confidence volume; therefore, we conclude that measurement of the tangential component is more suitable to an MCG system than measurement of the normal component.

• Journal of Families and Better Life
• /
• v.30 no.2
• /
• pp.101-120
• /
• 2012

This research was conducted in order to find out the effects of boys' self-control, their parents' behaviors and marital conflict on boys' aggression. Subtypes of aggression in the present research consist of dimensions of the functions and forms (proactive-overt, proactive-relational, reactive-overt, reactive-relational). The participants of this study were 237 boys in the fifth and sixth grades in elementary schools located in Seoul and Gyeonggi province. The questionnaires were derived and modified from Lee Hong (2009) for boys' aggression, from Ju So Young and Lee Yang Hee (2008) for boys' self-control, from Jun Joo Ram (2008) and Heo Seung Yeon (2009) for maternal behaviors and from Kang Na Jung (2008) for marital conflict. In order to grasp the general characteristics of the participants, frequency and descriptive statistics were used. Also, Pearson's correlation was applied to the relationships amomg boys' self-control, marital behaviors and marital conflict on boys' aggression. Lastly, the variables that can predict boys' aggression were analyzed through multiple regression analysis by SPSS 19.0. The major results of this study were as follows. This research showed that this model fit well for boys. To summarize the important results, what is interesting in the present study is the effect of the mother's role in rearing their sons. It was found that mothers' criticism, negative behaviors, and excessive interference can cause boys' high level of aggressiveness. Also, having parents who fight frequently was strongly associated with boys' relational aggression. An interesting finding is that the mother's support influenced boys' reactive-overt aggression. Lastly, boys' self-control was highly associated with boys' proactive-relational aggression. This research may contribute to understanding boys' aggression' subtypes. To that end, the current results suggest that the dimensions of the functions and forms may be a useful tool in an effort to inform developmental theory and intervention. Also, this research may provide guidance for the resolution of problems caused by boys' aggression. Lastly, it was found that self- control training and parental education programs might prove beneficial for helping aggressive boys to overcome their aggressive impulses.