• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.103-108
• /
• 2011

This paper is related radio interference from inductive system to radio device in home and industrial environment according to increasing the usage of inductive system. In order to analyze interference from magnetic field strength of inductive system, interference model was suggested and explain the method to calculate separation distance by using conversion that from magnetic field strength to magnetic dipole moment based on suggested interference model. Also, scenario that interference occur between inductive system and radio device was shown and the separation distance between inductive system and radio device was calculate with that scenario. The suggested method in this paper will be used to secure the compatibility between inductive system and radio device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1242-1250
• /
• 2008

In this paper, we predicted the radiation field strength from the low power radio devices to force the radio interference on the AMPS receiver. The predicted value of 79.13[$dB{\mu}V/m$] is the upper value of radiation against the intermodulation interference emanated from the low power radio devices. To show the validity of the suggested values theoretical analysis on intermodulation and modeling of the AMPS receiver are performed, and also measurements on the AMPS receiver IC are carried out. The resultant numerals show the good match between them within the allowable tolerances.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.873-882
• /
• 2013

The effective way of estimation and analysis of EMI(Electromagnetic Interference) in Wireless Power Transfer System operating at 13.56 MHz is proposed. In this paper methodology of driving magnetic field strength and electric loop current of two antennas which are in free space and on PEC plane using image theory and duality is proposed. Perfect electric conductor(PEC) is planar, infinite in extent, and perfectly conducting plane. And we will refer it as PEC plane. A equivalent circuit model is used to analyze. Using this theoretical analysis, we can derive maximum magnetic field strength of the far-field region numerically using measured data of near-field maximum magnetic field strength. The experimental results using commercial numerical simulation tool are in agreement with the theoretical results. Also, using the derivation of maximum magnetic field strength in the far-field region, we can easily estimate the maximum allowable power dissipation that meets EMI regulations.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.333-340
• /
• 1999

A reflective interference type optical modulator to compose the electric field sensor is proposed, and the performance and characteristics are theoretically analyzed. For the high sensitivity of the sensor, a method to improve the modulation index of the modulator is presented. The electric field sensor using $Ti:LiNbO_3$ waveguide was fabricated and qualitatively investigated the characteristics by measuring the low frequency electric field. Even though the sensor showed very low modulation index of 5%, the electric filed strength of 5 V/cm was measured. The experimental results revealed the utilities of this type electric field sensor.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.162-165
• /
• 2006

This paper describes a measurement method for electromagnetic field strength of power-line communications(PLC) modem. First it outlines the technology used in PLC modems, and the technical regulation being offered to the technology, from the point of view of its effect on electromagnetic compatibility (EMC). The radio spectrum needs protection from other interferers, and there is a regime in place to provide this protection. Difficulties in achieving compatibility between the requirements for radio protection and the requirements for operation of the PLC modem mean that there is no consensus as yet as to how PLC modem components can be made compliant with EMC requirements globally. It is concluded that there is a measurement method according to CISPR standards which satisfy requirements in domestic regulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.630-639
• /
• 2008

In this paper, we investigate the cause of throughput degradation on the wireless local area network(WLAN) and the reason of interference level change attributed to the spanned frequency in the presence of electromagnetic interference. We also measured and quantified the electric field strength of interference which yields the abrupt change of the throughput. Two units of WLAN and one unit of AP(Access Point) are configured to maintain the radio link. As the sources of interference, both the co-channel and adjacent-channel interference are considered and the critical values of electric field are provided for each case. Our experimental observations show that the signal strength generated from these interference sources is at most less than 54 dBuV/m @3 m in order to coexist between WLANs and other low power radio devices without any noticeable throughput decreases. Based on our empirical results, as far as 802.11b WLAN is concerned, we believe that the current domestic limit of the signal strength for an extremely low power radio device, 30.9 dBuV/m @3 m, can be increased as much as 23.1 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1059-1065
• /
• 2010

Recently, analog broadcasting are being converted into digital radio broadcasts, Among the various ways that HD Radio is a candidate for the U.S. approach, Digital Radio will transmit a digital signal to existing analog FM/AM. It provides clear sound quality, traffic information, weather information and various value-added services. In addition, the converted digital radio will be able to meet demand to growing demand for analog FM. In this paper, Digital FM Radio system in the same frequency band using electric field strength of the received digital radio broadcasting interference effects were analyzed. And Digital FM Radio Receiver interference effects were analyzed by interference signal power and signal power. Results were confirmed by applying equation at minimum field strength and SNR.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.40-47
• /
• 2013

By virtue of Rec. ITU-R P.1546 and geography information system, interference analysis for the fixed wireless system and radar has been presented based upon the frequency-distance rules with minimum coupling loss, and a comprehensive methodology for assessing interoperability between systems was examined in terms of received signal, protection ratio, frequency dependent rejection. Also to find the antenna gain from a discrimination angle, a useful S-I plane was introduced based on signal and interference vectors derived from the real map with geographic information. To show some computational results, geography information on the map was taken for the given area, and field strength and path profile were illustrated for the radar and fixed wireless system operating at 2.7 GHz, for convenience. In addition the interference effect of receiver was also checked as a function of radar beam direction including protection ratio and frequency dependent rejection. The developed interference analysis can be actually applied to evaluate interoperability for wireless systems in the VHF and UHF bands.

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.263-271
• /
• 2002

In this paper, we propose a new smoothing method for removing moire patterns using analysis of halftone patterns interference. The proposed method can determine a strength of moire patterns by using gray values of pixels and the size of smoothing mask for moire region is adjusted adaptively according to the strength of moire patterns. Therefore it can remove moire patterns effectively and preserve meaningful high frequencies well, such as edges and textures. The proposed method only refer to predefined lookup table to determine the strength of moire patterns, so it is more efficient than a previous work based on FFT of subblock. It could be applied to field of various multimedia applications that deal with color prints.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.10
• /
• pp.471-476
• /
• 2005

We proposed an optical modulator of reflective type to compose the electric field sensor, and theoretically analyzed the performance and characteristics. For the high sensitivity of the sensor, a method to improve the modulation index of the modulator was presented. The electric field sensor using Ti:LiNbO$_{3}$ waveguide was fabricated and qualitatively investigated the characteristics by measuring the low frequency electric field. Even though the sensor showed relatively low modulation index, the electric filed strength of 10$^{-2}$V/m was measured. The experimental results revealed the utilities of this type electric field sensor.