• Bulletin of the Korean Chemical Society
• /
• 제26권4호
• /
• pp.569-574
• /
• 2005

A coupled column liquid chromatography system was applied for the separation of the burnup monitors in spent nuclear fuel sample solutions. A reversed phase column was studied for the adsorption behavior of uranyl ions using alpha-hydroxyisobutyric acid as an eluent and used for the separation of plutonium and uranium. A cation exchange column prepared by coating 1-eicosylsulfate onto the reversed phase column was used for the separation of the lanthanides. In addition, retention of Np was checked with the reversed phase column and cation exchange column, respectively, according to the oxidation states to observe the interference effect for the separation of burnup monitors. This chromatography system showed a great reduction in separation time compared to a conventional anion exchange method. A good agreement from the burnup data was obtained between for this method and a conventional anion exchange method to within 1% of a difference for the spent nuclear fuel samples of about 40 GWD/MTU.

• 한국전자파학회논문지
• /
• 제21권10호
• /
• pp.1136-1142
• /
• 2010

본 논문에서는 조명용 LED를 광원으로 사용한 무선 광통신 시스템에서 광전 궤환을 이용한 ASK 변조 방식을 사용하여 잡음 광의 간섭을 소거하였다. 광전 궤환 회로의 발진을 이용하여 70 kHz의 반송파를 자체적으로 생성하였으며, 입력 신호를 사용하여 궤환 회로의 단락과 개방을 반복함으로써 9.6 kbps의 데이터 속도로 출력광을 ASK 변조하였다. 주변의 잡음 광이 존재하는 환경에서 광전 궤환을 이용한 ASK 변조 방식을 사용함으로써 신호대 잡음비가 약 25 dB 개선되었다.

• Human Ecology Research
• /
• 제54권5호
• /
• pp.475-485
• /
• 2016

This study explored mothers' and grandmothers' perception regarding child rearing practices as overprotective behaviors for first to third grade levels of elementary school. The study was conducted on 202 mothers and grandmothers of first to third grade elementary school students. Questionnaires were made with 40 questions on overprotection behaviors selected from the existing questions for preschooler, high grade elementary students, and youth. The questionnaires were distributed to target subjects to answer how they would perceive when each of question is applied to their lower grade elementary students. Based on the collected responses and the factor analysis, it was found out that the overprotective behaviors were classified into four factors such as "reduction in independence," "over-sensitiveness to safety," "interference in daily life," and "health anxiety." There were significant differences in the perception of the overprotective behavior by the subjects depending on the generations, features of children and mothers. This study focused on the lower grade elementary school students who have been removed from studies due to the lack of intervention measures. It has the implication in that the findings of the study can give the basic data for the development of the scale on overprotective behaviors in lower grade elementary school students.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.107-114
• /
• 2014

A friction hinge system which moves without power was designed and developed using the principle of friction force, which is caused by interference between the inner diameter of a silicon cap and the outer diameter of a cylindrical roller bearing with one-way rotation in a counterclockwise direction. The system was applied to the lid of buffet ware, which moved up by external force and moved down by gravitational force. However, design conditions which included a rotation angle of the hinge of more than 80 degrees and a closing time of more than 20 seconds were required when the lid of the buffet ware closed due to gravitational force. The design safety of the friction hinge body connected to the lid of the buffet ware from the hinge system was checked on the basis of structural, fatigue and thermal analyses. The material of the shaft, cap and flange among the hinge elements was changed to polyethylene from steel to reduce the weight of the friction hinge system. An injection molding simulation was performed and injection molds of the shaft, cap and flange were created. The weight of the hinge system was decreased from 805g to 219g.

• 대한기계학회논문집B
• /
• 제29권12호
• /
• pp.1321-1328
• /
• 2005

The burning characteristics of interacting coal particles in a convective flow are numerically investigated at various Reynolds numbers. The transient combustion of 2-dimensionally arranged particles, both the fixed particle distances of 5 radii to 20 radii horizontally and 4 radii to 24 radii vertically, is studied. The results obtained from the present numerical analysis indicate that the transient flame configuration and retardation of particle temperature augmentation with the horizontal or vertical particle spacing substantially influence devolatilization process and carbon conversion ratio of interacting particles. Volatile release and carbon conversion ratio of the second particle with decreasing horizontal and vertical particle spacing decrease gradually, whereas those of the first particle with decreasing vertical particle spacing increase due to flow acceleration. When the vertical particle spacing is smaller than $6R_0$, volatile release and carbon conversion ratio of the second particle decrease due to reduction of flame penetration depth and interference of oxygen diffusion by the first particle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1993년도 춘계학술대회논문집; 한국과학연구소, 21 May 1993
• /
• pp.140-146
• /
• 1993

Active noise control uses the intentional superposition of acoustic waves to create a destructive interference pattern such that a reduction of the unwanted sound occurs. In active noise control system the choice of a control structure and design of the controller are the main issues of concern. In real acoustic fields there are a vast number of noise sources with time-varying nature and the characteristics of transducers and the geometric set-up of control system are subject to change. Accordingly the control system should be designed to adapt such circumstances so that required level of performance is maintained. In this paper, the adaptive control algorithm for self-tuning adaptive controller is presented for the application in active noise control system. Self-tuning is a direct integration of identification and controller design algorithm in such a manner that the two processes proceed sequentially. The least mean square algorithm was used for the identification schemes and adaptive weighted minimum variance control algorithm was applied for self-tuning controller. Computer simulation results for self-tuning feedback controller are presented. And simulation results was shown to be useful for the situation in which the periodic noise sources act on the acoustic field.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.185-192
• /
• 2012

The paper presents the development of a cooling circuit design system that automatically creates 3D cooling circuit on a given section plane conforming to design specifications, generates 3D solid model of cooling line segments defined on a 2D sketch plane, and verifies interference of 3D cooling channel with the molding die surface. The system was developed mainly for designing plastic injection molding die of vehicular lamp, which helps the mold designer to rapidly construct cooling circuits but also reduce designer's unintended mistakes by conforming to the dimensional design specifications. It is used by an injection molding die manufacturing company in Korea, and reported approximately 20% reduction of cooling channel design time.

• Wind and Structures
• /
• 제24권4호
• /
• pp.367-384
• /
• 2017

The Maanshan Bridge over Yangtze River in China is a new long-span suspension bridge with double main spans of $2{\times}1080m$ and a closed streamline cross-section of single box deck. The flutter and buffeting performances were investigated via wind tunnel tests of a full bridge aeroelastic model at a geometric scale of 1:211. The tests were conducted in both smooth wind and simulated boundary layer wind fields. Emphasis is placed on studying the interference effect of adjacent span via installing a wind deflector and a wind separating board to shelter one span of the bridge model from incoming flow. Issues related to effects of mid-tower stiffness and deck supporting conditions are also discussed. The testing results show that flutter critical wind velocities in smooth flow, with a wind deflector, are remarkably lower than those without. In turbulent wind, torsional and vertical standard deviations for the deck responses at midspan in testing cases without wind deflector are generally less than those at the midspan exposed to wind in testing cases with wind deflector, respectively. When double main spans are exposed to turbulent wind, the existence of either span is a mass damper to the other. Furthermore, both effects of mid-tower stiffness and deck supporting conditions at the middle tower on the flutter and buffeting performances of the Maanshan Bridge are unremarkable.

• Journal of Yeungnam Medical Science
• /
• 제30권1호
• /
• pp.4-9
• /
• 2013

Leptin, a 16-kDa cytokine, is secreted by adipose tissue in response to the surplus of fat store. Thereby, the brain is informed about the body's energy status. In the hypothalamus, leptin triggers specific neuronal subpopulations (e.g., POMC and NPY neurons) and activates several intracellular signaling events, including the JAK/STAT, MAPK, PI3K, and mTOR pathway, which eventually translates into decreased food intake and increased energy expenditure. Leptin signal is inhibited by a feedback inhibitory pathway mediated by SOCS3. PTP1B involves another inhibitory pathway of leptin. Leptin potently promotes fat mass loss and body weight reduction in lean subjects. However, it is not widely used in the clinical field because of leptin resistance, which is a common feature of obesity characterized by hyperleptinemia and the failure of exogenous leptin administration to provide therapeutic benefit in rodents and humans. The potential mechanisms of leptin resistance include the following: 1) increases in circulating leptin-binding proteins, 2) reduced transport of leptin across the blood-brain barrier, 3) decreased leptin receptor-B (LRB), and/or 4) the provocation of processes that diminish cellular leptin signaling (inflammation, endoplasmic reticulum stress, feedback inhibition, etc.). Thus, interference of the cellular mechanisms that attenuate leptin signaling improves leptin action in cells and animal models, suggesting the potential utility of these processes as points of therapeutic intervention. Various experimental trials and compounds that improve leptin resistance are introduced in this paper.

• 무역상무연구
• /
• 제14권
• /
• pp.349-370
• /
• 2000

The environmental problems such as global climate change, global waming, ozone depletion, environmental pollution have been caused by the rapid economic growth, increasing in use of fossil fuels for industrialization and scientific technology development. Especially human activities are significantly altering the atomosphere's composition and its radiative properties. To Stabilize greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system, the international community adopted the UN Framework Convention on Climate Change in 1992 and Kyoto protocol in 1997. Also to protect ozone layer the international community adopted the Vienna Convention for the Protection of the Ozone Layer in 1985, and the Montreal Protocol on Substances that Deplete the Ozone Layer in 1987. To achieve global environmental objectives, some multilateral environmental agreements includes trade regulation. For example, Montreal Protocol includes the provisions to regulate the world trade of the sudstances which might destroy ozone layer. However Kyoto Protocol has no provisions to regulate trade and is not in force yet. Although there is no trade regulation article in Kyoto Protocol, the international world trade will be influenced by limitation and reduction of CO2 and strengthening the CO2 emission standard for import good. For example Korean car industy agreed with EU to reduce CO2 emission from new passenger car and Korean Semiconductor industry agreed with WSC(World Semiconductor Council) to reduce PFCs in 1999.