• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2809-2818
• /
• 2022

In this investigation work, liquid-liquid extraction (L.L.E) through three distinctive frameworks have been examined for assurance of slip velocity (S.V), and characteristic velocity (C.V) in a non-center rotating column (N.C.R.C) with a wide extend of factors. Three double frameworks with distinctive interfacial tension comprising of toluene-water (high interfacial tension), n-butyl acetate-water (medium interfacial tension), and n-butanol-water (low interfacial tension) were investigated for tests. Two common relationships for the expectation of S.V and C.V, including phase stream rates, rotor speed, column geometry additionally physical properties, are displayed. The recommended relationships were compared with test information gotten from the writing and the display examination. Findings of this study, the present proposed correlations are more accurate than those previously reported.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.109-115
• /
• 2008

A Plastic Bonded Explosive(PBX) is mainly composed of nitramine explosive and polymer binder. The great number of serious applications of PBX requires the good adhesion between nitramine crystals and binder, which depends on the surface characteristics of a filler and binder. In the pursuit of the better design to achieve the enhanced adhesion, profound knowledge of the surface and interfacial characteristics of explosive and binder should be exploited. In this study, the influences of physicochemical properties between RDX and binders such as interfacial tension($\gamma_{SL}$), latent heat($Q_m$), and density($\rho$) on impact sensitivity of PBX were investigated. As experimental results, the major contribution factor to impact sensitivity of PBX was the interfacial tension, compare with other surface properties. The correlation coefficient of $H_{50}$ versus $\gamma_{SL}$ is 0.9932 when a polynomial regression method was used.

• 폴리머
• /
• 제39권3호
• /
• pp.388-393
• /
• 2015

PC와 SAN 사이의 계면장력 및 친화도에 미치는 저분자량 성분의 영향을 알아보기 위하여 용매 추출법으로 각 고분자에서 저분자량 성분을 추출하였다. GPC(gel permeation chromatography)로 분자량 분포를 확인한 결과, 각 고분자의 저분자량 성분은 용매 추출법에 의해 효과적으로 제거된 것을 확인하였다. 저분자량 성분이 제거된 고분자를 이용하여 계면장력 및 형태학 분석 결과, 저분자량 성분이 제거된 PC와 SAN은 계면장력이 높아졌고 친화도가 떨어진 것을 확인할 수 있었다. 즉 저분자량 성분이 두 고분자 사이에 상용화제와 같은 역할을 하는 것을 알 수 있었다. 두 고분자 중 SAN의 저분자량 성분이 PC의 저분자량 성분보다 상용화 효과에 더 많이 기여하는 것을 확인하였고, 이로서 PC/ABS 제조 시 저분자량 성분이 많이 포함된 SAN을 사용하는 것이 더 유리하다는 것을 알 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제9권1호
• /
• pp.32-38
• /
• 1999

A biosurfactant produced by Tsukamurella sp. 26A was purified by procedures including acid precipitation, ethylacetate extraction, and adsorption chromatography. The purified biosurfactant reduced the surface tension of water from 72 mN/m to 30 mN/m at a concentration of 250 mg/l, whereas the minimum interfacial tension against n-hexadecane was lowered to 1.5 mN/m at a concentration of 40 mg/i. The compound stabilized oil-in-water emulsions with a variety of commercial oils and had strong emulsification and stabilization activities when compared to those of commercial emulsifiers and stabilizers. Surface tension was stable over a broad range of pH (2-12) and temperature ($100^{\circ}C$, 3h). The biosurfactant was identified as glycolipid having a hydrophilic moiety of trehalose.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.269-277
• /
• 1995

A topological theory has been introduced to extend the theory of Balsara and Nauman to evaluate the entropy of in homogeneous polymer solutions. Previous theories have considered only the terms about the displacement of junction points, while the present theory has obtained a more complete expression for the entropy by adding the topological interaction terms between strands. There have been predicted the characteristics of the spinodal decomposition and the interfacial tension of polymer solutions from the resultant expression. It is exposed that the theoretically predictive values show good agreement with the experimental data for polymer solutions.

• 한국재료학회지
• /
• 제19권2호
• /
• pp.111-114
• /
• 2009

For the fabrication of core-shell structure bimetallic lead-free solder balls, both the critical temperature ($T_{cr}$) for the phase separation of two immiscible liquid phases and the temperature coefficient of the interfacial tension between the two separated liquid phases are required. In order to obtain this information, the temperature dependence of the surface tension of 60%Bi-24%Cu-16%Sn(-REM) alloys was measured using the constrained drop method. The slope of the temperature dependence of the surface tension changed clearly at a critical temperature for the separation of two immiscible liquid phases. The critical temperature of the 60%Bi-24%Cu-16%Sn alloy was estimated to be 1097K. An addition of 0.05% Ce decreased the critical temperature to 1085K, whereas that of 0.05% La increased it to 1117K. It was found that the surface tension and its temperature coefficient of the 60%Bi-24%Cu-16%Sn alloy were slightly increased by the addition of 0.05% Ce and 0.05% La. In addition, additions of Ce and La increased the temperature coefficient of the interfacial tension.

• 한국의류학회지
• /
• 제21권3호
• /
• pp.632-640
• /
• 1997

Changes in surface properties and detergency of sunactant mixtures were investigated in order to study the optimum mixing ratio of anionic and nonionic surfactants by measuring surface tension, interfacial tension, suspendability, and emulsification as a Amction of mixing ratio. Also, surface tension and detergency of the surfactant mixtures were determined with the increase of water-hardness or temperature. The results were as follows: the addition of NPE to anionic surfactant solutions (LAS or SDS) by 0.1 mole fraction remarkably decreased surface tension. NPE (n=15)/anionic surfactant mixtures showed a synergistic effect in lowering interfacial tension and emulsification, but NPE (n=7.5)/anionic surfactant mixtures did not. In suspension stability, however, synergism appeared when LAS or 505 was mixed with both of NPE's. With respect to the hydrophile of NPE, NPE (n=15) was more effective than NPE (n=i.5) in improving suspension stability. Detergency of LAS/NPE mixture changed almost linearly with mixing ratio, but that of SDS/NPE mixture increased remarkably by the addition of 0.1 or 0.2 mole fraction of NPE at all temperatures. As the temperature increased, surface tension of surfactant mixtures decreased and detergency was improved, but their synergistic effect decreased. In hard water, the mixtures showed better detergency than single surfactuant solutions.

• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.91-96
• /
• 2002

Three different kinds of substrate used in this study : bare Cu, electroless Ni/Cu substrate with a Nilayer thickness of $5\mu\textrm{m}$, immersion Au/electroless Ni/Cu substrate with the Au and Ni layer of $0.15\mu\textrm{m}$ and $5\mu\textrm{m}$ thickness, respectively. The wettability and interfacial tension between various substrate and Sn-3.5Ag solder were examined as a function of soldering temperature, types of flux. The wettability of Sn-3.5Ag solder increased with soldering temperature and solid content of flux. The wettability of Sn-3.5Ag solder was affected by the substrate metal finish used, i.e., nickel, gold and copper. Intermetallic compound formation between liquid solder and substrate reduced the interfacial energy and decreased wettability.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.444-449
• /
• 2010

본 연구에서는 정유회사 등에서 폐기되는 부생유(pyolyzed fuel oil)를 황산화 반응하여 petroleum sulfonate(PS)를 합성하였다. 합성된 PS는 계면활성 성질을 나타내었으며 이는 황산화율과 관계가 있었다. 또한 반응에 있어서 황산화율은 온도 및 시간에 따라 속도에 차이는 있었으나 대부분의 경우 40~50% 정도에서 황산화율이 거의 포화에 이르렀다. 황산화율이 증가함에 따라서 친수성이 증가하여 용액의 표면장력이 낮아졌으나 과도한 황산화율에서는 친수성이 너무 강하여 표면장력 값이 오히려 증가하였다. 황산화율에 따라서 적정한 친수-친유 비율에서는 낮은 표면장력과 시멘트에 대하여 우수한 젖음성을 나타내었다. 황산화율에 따라서 PS는 시멘트 표면에 대한 흡착량에 차이를 보였으며 흡착량이 클수록 시멘트에 대한 젖음성이 증가하여 시멘트 입자의 제타전위를 높였으며 보다 우수한 시멘트 몰타르 유동성을 나타내었다.

• 대한기계학회논문집B
• /
• 제39권8호
• /
• pp.677-682
• /
• 2015

격자 볼츠만 기법(Lattice Boltzmann method)을 사용하여 에멀전의 유변학적 특성을 파악하기 위한 시뮬레이션을 수행하였다. 간단한 전단 유동하에서 온도와 전단속도, 계면장력에 변화를 주어 에멀전(decane-in-water)의 상대점도를 계산하고 이를 분석하였다. 에멀전의 상대점도는 온도가 증가함에 따라 감소하였고, 전단속도가 증가함에 따라 감소하는 전단박하(Shear thinning) 현상을 보여주었다. 이는 크로스 모델(Cross model)을 통해 검증하였고 일치하는 경향을 보여주었다. 계면에 존재하는 계면활성제(Surfactant)를 통해 제어되는 계면장력이 증가할수록 상대점도는 감소하는 경향을 보여주었다. 이것은 큰 계면장력에서는 기름방울의 변형이 억제되고 점도가 상대적으로 높은 기름방울의 표면적이 감소하면서 나타난다고 해석할 수 있다.