• Ocean Systems Engineering
• /
• v.1 no.2
• /
• pp.157-169
• /
• 2011

To provide more rational design solutions at conceptual design level, axiomatic design method has been applied to solve critical part of a new engineering problem called Mobile Harbor. In the implementation, the Mobile Harbor, a functional harbor system that consists of a vessel with container crane approaches to a container ship anchored in the open sea and establishes a secure mooring between the two vessels to carry out loading and unloading of containers. For this moving harbor system to be able to operate successfully, a reliable and safe strategy to moor and maintain constant distance between the two vessels in winds and waves is required. The design process of automatic ship-to-ship mooring system to satisfy the requirements of establishing and maintaining secure mooring has been managed using axiomatic design principles. Properly defining and disseminating Functional Requirements, clarifying interface requirements between its subsystems, and identifying potential conflict, i.e. functional coupling, at the earliest stage of design as much as possible are all part of what need to be managed in a system design project. In this paper, we discuss the automatic docking system design project under the umbrella of KAIST mobile harbor project to illustrate how the Axiomatic Design process can facilitate design projects for a large and complex engineering system. The solidified design is presented as a result.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.833-844
• /
• 2015

Recently, new network systems have begun to emerge (for instance, 5G, IoT, and ICN) that require capabilities beyond that provided by existing IP networking. To fulfill the requirements, some new networking technologies are being proposed. The promising approach of the new networking technology is to try to overcome the architectural limitations of IP networking by adopting an identifier (ID)-based networking concept in which communication objects are identified independently from a specific location and mechanism. However, we note that existing ID-based networking proposals only partially meet the requirements of emerging and future networks. This paper proposes a new ID-based networking architecture and mechanisms, named IDNet, to meet all of the requirements of emerging and future networks. IDNet is designed with four major functional blocks-routing, forwarding, mapping system, and application interface. For the proof of concept, we develop numeric models for IDNet and implement a prototype of IDNet.

• Electronics and Telecommunications Trends
• /
• v.32 no.5
• /
• pp.97-106
• /
• 2017

The introduction of new access technologies in 5G radio networks has had a considerable impact on the design of transport networks. Research activities are underway on new transport technologies in both the wireless and optical domains to support 5G transport. This paper provides an overview of the concept and requirements of a fronthaul. We also discuss the research activities of a new fronthaul interface for future 5G networks, a 5G integrated fronthaul/backhaul transport network (5G-Crosshaul), a next-generation fronthaul interface (NGFI), a mobile xhaul network (MXN), and a next-generation mobile fronthaul architecture with multi-IF carrier transmission scheme.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.3
• /
• pp.133-140
• /
• 2015

Neural stimulating implantable medical devices (IMDs) have been widely used to treat neurological diseases or interface with sensory feedback for amputees or patients suffering from severe paralysis. More recent IMDs, such as retinal implants or brain-computer interfaces, demand higher performance to enable sophisticated therapies, while consuming power at higher orders of magnitude to handle more functions on a larger scale at higher rates, which limits the ability to supply the IMDs with primary batteries. Inductive power transmission across the skin is a viable solution to power up an IMD, while it demands high power efficiencies at every power delivery stage for safe and effective stimulation without increasing the surrounding tissue's temperature. This paper reviews various wireless neural stimulating systems and their power management techniques to maximize IMD power efficiency. We also explore both wireless electrical and optical stimulation mechanisms and their power requirements in implantable neural interface applications.

• Journal of Aerospace System Engineering
• /
• v.6 no.4
• /
• pp.34-39
• /
• 2012

CubeSats classified as pico-class satellite require a ground station to track the satellite, transmit a command, and receive an on-orbit data such as SOH (State-of-Health) and mission data according to the operation plan. For this, ground station system has to be properly designed to perform a communication to with the satellite with enough up- and down-link budgets. In this study, a conceptual design of the ground station has been performed for the CubeSat named as STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project). The paper includes a ground station hardware interface design, link budget analysis and a ground station software realization. In addition, the operation plan of the ground station has been established considering the STEP Cube Lab. mission requirements.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.41-47
• /
• 1984

Increase of the requirements on quality of welded structures necessitates the improvement of known inspection methods and the introduction of progressive new techniques. Non-destructive methods are the most advanced, but there are considerable difficulties in using the methods of radiography with electromagnetic rays and ultrasonic testing in the inspection of dissimilar metal friction welds, because their physical and mechanical properties are changed very rapidly at the interface. The values of simple mechanical test for dissimilar metal friction welds have always been dubious, as the strength of the bond is often greater than that of the softer materials being jointed. Thus, in this paper some conventional mechanical testing methods are examined in an attempt to determine a technique for dissimilar metal friction welds, which will give a reliable quantitative indication of the weld quality. From the considered static and dynamic testing methods the impact bending test on unnotched and notched specimens are the most sensitive to find out the small joining defects in the interface.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.241-247
• /
• 2009

It is important to satisfy the requirements and standards for the protections of passengers in a car accident. There are lots of studies on the crushing energy absorption of a structure members in automobiles. We have studied to investigate collapse characteristics and moisture absorption movements of CFRP(Carbon Fiber Reinforced Plastics) hat shaped sectional members when CFRP laminates are under the hygrothermal environment. In particular, the absorbed energy, mean collapse load and deformation mode were analyzed for side members which absorbed most of the collision energy. Variation of CFRP interlaminar numbers is important to increase the energy absorption capability. Therefore we have made a static collapse experiment to research into the difference of absorbed energy and deformation mode between moisture absorbed specimen and non-moisture absorbed.

• IE interfaces
• /
• v.13 no.3
• /
• pp.528-538
• /
• 2000

HLA is a general-purpose software architecture for distributed simulation designed to support a wide range of simulation approaches and application. The US DoD's HLA for modeling and simulation can certainly be regarded as the state of the art in distributed simulation. It is a mandatory standard for military simulation. The purpose of this paper is to describe applications of HLA/RTI in multiple domains across the manufacturing systems society. In many and large scale industrial systems, enormous data is generated, and is to be managed in an effective way. It needs a high performance common network library. Furthermore, it must satisfy the real function of system facilities as much as possible. The RTI is an implementation of the interface specification, provided as a set of services. Some applications focusing on the area of a small manufacturing system were demonstrated. The integration could be achieved using the HLA, together with interface modules for each of the subsystems. We have found that HLA/RTI are cable of meeting the functional requirements for a given system environment.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.100-103
• /
• 1996

Presented in this study is an algorithmic procedure to obtain polyhedral model from a compound surface. The compound surface in this study denotes a collection of trimmed surfaces without topological relations. The procedure consists of two main modules: CAD data interface, and surface conversion to polyhedral model. The interface module gets geometric information from CAD databases, and makes topological information by scanning the geometric information. We are investigating CATIA system as a data source system. In the surface conversion module, a shell(compound surface with topological information) is approximated to a triangular-faceted polyhedral surface model through node sampling and triangulation steps. The obtained polyhedral model should obey the vertex-to-vertex rule and meet tolerance requirements. Since the polyhedral model has a simple data structure and geometry processing for it is very efficient and robust, the polyhedral model can be used in various applications, such as surface rendering in computer graphics, FEM model for engineering analysis, CAPP for surface machining, data generation for SLA, and NC tool path generation.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.53-59
• /
• 2006

The paper highlights technical advances and introduces recent innovations such as smart curing laminating adhesives for flexible packaging with low migration rates of aromatic isocyanates and amines. Latent reactive one-part systems on the basis of surface deactivated solid isocyanates open up new dimensions for heat setting adhesives and waterborne PU dispersions. The new generation of Purmelt Micro Emission adhesives contains less than 0.1% of MDI monomer, thereby drastically reducing the emission of hazardous isocyanate vapors during processing and setting a significantly improved technical standard in occupational safety. Once again, polyurethane adhesives have demonstrated their unique ability to adapt to new process, product, safety and environmental requirements.