• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.54-54
• /
• 2009

Ag thick film has been used for electrode materials with the excellent conductivity. Ag electrode is used in screen-printed silicon solar cells as a electrode material. Compared to photolithography and buried-contact technology, screen-printing technology has the merit of fabricating low-priced cells and enormous cells in a few hours. Ag paste consists of Ag powders, vehicles and additives such as frits, metal powders (Pb, Bi, Zn). Frits accelerate the sintering of Ag powders and induce the connection between Ag electrode and Si wafer. Thermophysical properties of frits and reactions among Ag, frits and Si influence on cell performance. In this study, Ag pastes were fabricated with adding different kinds of frits. After Ag pastes were printed on silicon wafer by screen-printing technology, the cells were fired using a belt furnace. The cell parameters were measured by light I-V to determine the short-circuit current, open-circuit voltage, FF and cell efficiency. In order to study the relationship between the reactivity of Ag, frit, Si and the electrical properties of cells, the reaction of frits and Si wafer on was studied with thermal properties of frits. The interface structure between Ag electrode and Si wafer were also measured for understanding the reactivity of Ag, frit and Si wafer. The excessive reactivity of Ag, frit and Si wafer certainly degraded the electrical properties of cells. These preliminary studies suggest that reactions among Ag, frits and Si wafer should optimally be controlled for cell performances.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권6호
• /
• pp.63-67
• /
• 2005

불포화 토양내에서 가스상 오존의 이동특성에 대한 토양수분과 Light non-aqueous phase liquid (LNAPL)의 영향을 알아보기 토양칼럼실험을 실시하였다 토양수분은 토양입자에 수막을 형성하여 가스상 오존과 토양입자의 직접적인 접촉을 방해하여 오존의 이동을 증가시키는 역할을 하였다. 토양수분이 증가할수록 불포화 토양내의 기-액 접촉면적 감소와 오존의 평균선형유속증가로 인해 오존의 이동속도가 증가하였다. LNAPL로 사용된 디젤유의 경우도 토양 표면에 막(Film)을 형성하여 가스상 오존의 이동을 증가시키는 역할을 하였다. 하지만, 토양 수분과는 반대로 디젤유 농도가 증가할수록 오존의 이동속도는 감소하였다. 토양수분과 LNAPL성분이 동시에 존재할 경우에는 토양입자에 Non-wetting유체로 작용하는 LNAPL에 의해 오존의 이동이 영향을 받는다는 것을 알 수 있었다

• 한국수산과학회지
• /
• 제42권1호
• /
• pp.15-19
• /
• 2009

A simple and sensitive method for erythromycin quantification by liquid chromatography electrospray mass spectrometry (LC-MS/MS) in fishery products was developed. Samples were extracted by liquid-liquid extraction using 70% acetonitrile. Lipids were removed by acetonitrile saturated hexane. LC separation was performed on a Shiseido UG C-18 column ($150\;mm{\times}2.0\;mm$ internal diameter.) with a gradient system of 0.2% acetic acid-acetonitrile containing 0.2% acetic acid as a mobile phase at flow rate of 0.2 mL/min. The mass spectrometer was operated in selected reaction monitoring with positive electro-spray interface. Transitions were monitored a m/z $734{\to}577$ and $734{\to}158$, with m/z $734{\to}577$ chosen for quantification. Recovery of erythromycin from fish and shrimp fortified at the 10 ng/mL, 50 ng/mL and 100 ng/mL were 91.6-109.4%, 84.4-111.2% and 98.8-109.6% with high precision, respectively. Limits of quantification and limits of detection of erythromycin in both fish and shrimp were 10.0 ng/mL and 1.0 ng/mL, respectively. This analysis method for erythromycin has been proposed for registration in the Korean Official Methods of Food Analysis and has been utilized for fishery products analysis by the Korea Food and Drug Adminstration and the National Fisheries Products Quality Inspection Service.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.97-105
• /
• 1998

$Al_2O_3-C$계 내화물에 Al 금속분말을 첨가하여 $800^{\circ}C$에서 $1400^{\circ}C$의 온도영역에서 탄소의 산화억제 메카니즘을 조사하였다. 탄소의 산화는 Al 금속분말을 5wt% 첨가한 $Al_2O_3-C-Al $ 시편에서 억제되었으며, 시편의 표면과 내부계면에 탄소가 비교적 균일하게 분포되어 있었다. Al-C 시편의 조성에서 중간생성물인 $Al_4C_3$ 및 AlN이 $800-1200^{\circ}C$의 온도범위에서 존재하였으며, $1400^{\circ}C$ 이상의 고온에서 모두 $Al_2O_3$로 전이하였다. $1000^{\circ}C$에서 1시간 가열한 Al-C 시편에서 $Al_4C_3$의 생성과 관계있는 cavity structure가 관찰되었다. 열역학적 고찰을 기초로 하여 산환억제 효과와 관계있는 $Al_4C_3$와 AlN의 생성, $Al_2O_3$로의 전이, C(s)의 형성등이 논하였다.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.223-231
• /
• 2010

The serious issue of tall building is to ensure the fire-resistance of high strength concrete. The fire resistant finishing method is necessarily essential in order to satisfy the fire resistance time of 3 h required by the law. The fire resistant finishing method is installed by applying a fire resistant material as a method of shotcrete or a fire resistant board to high strength concrete surface. This method can reduce the temperature increase of the reinforcement embedded in high strength concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of inorganic alumino-silicate compounds including the inorganic admixture such as fly ash and meta-kaolin as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. The study results show that the fire resistant finishing material composed of fly ash and meta-kaolin has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Inorganic compounds composed of fly ash and meta-kaolin is evaluated to be very effective as the fire resistance material for finishing to protect the concrete substrate by the reason of those simplicity in both application and manufacture. The additional study about the adhesion in the interface with concrete substrate is necessary for the purpose of the practical application.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.59-69
• /
• 1997

이트리움 실리사이드($YSi_2$)는 $400^{\circ}C$ 이상의 진공열처리 중 고상반응에 의하여 (100)Si 기판상에서 $YSi_2$의 (1100)면이 방향성 성장을 하였으며, $YSi_2$ 박막과 (100)Si 기판과의 방위관계는 [0001]$YSi_2$//[011i]Si과 [0001]$YSi_2$//[011]Si이었다. 그러나 방위관계에서도 알 수 있는 바와 같이 $YSi_2$는 [1100]$YSi_2$의 domain이 상호간에 $90^{\circ}$의 방위각을 이루며 성장하는 이른바 double-domain 구조를 나타내었다. 이는(1100)$YSi_2$면과 Si기판과의 계면에서 커다란 격자 불일치의 이방성 때문이라 생각되며, 각각의 domain은 (2201) 비대칭 반사면의 $\omega$-mode rocking curve 측정 결과, 거의 동등한 체적율과 결정성을 나타내었다. 본 연구에서는 이러한 double-domain의 형성기구를 (1100)$YSi_2$면과 (100)Si기판과의 계면에서 정합 모델에 근거한 기하학적 matching 관계로 설명하였다.

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.11-19
• /
• 2015

본 논문에서는 다물질(가연성 기체 혼합물과 금속관) 수치 해석 기법을 활용하여 밀리미터 크기의 얇은 두께의 금속관 내에서의 데토네이션을 모델링하였다. 데토네이션의 해석을 위하여 수소와 에틸렌 혼합물의 실험과 이론적 값을 기반으로 최적화된 1단계 아레니우스 형태의 화학 반응식, 이상기체 상태 방정식을 활용하여 모델링하였다. 또한 금속관의 재료인 구리와 철은 Mie-Gruneisen 상태 방정식과 Johnson-Cook 강성 모델을 활용하여 큰 압력에 의한 관의 소성 변형을 모델링하였다. 다물질 수치 해석을 위한 경계면의 추적 및 경계면 값의 결정은 각각 hybrid particle level-set 기법과 ghost fluid method(GFM)을 통하여 획득하였다. 수치적 해석 결과는 실험값과의 비교를 통하여 검증 하였으며, 관두께(두꺼운 관과 얇은 관)에 따른 내부 유동장의 변화를 확인하였다. 얇은 관의 경우, 데토네이션에 의해 발생하는 높은 내부 압력에 의하여 관의 소성 변형이 일어나고, 이에 따라 발생하는 팽창파에 의해 내부 기체 혼합물의 압력 및 밀도의 감소현상을 확인하였다.

• 한국주조공학회지
• /
• 제31권2호
• /
• pp.66-70
• /
• 2011

Hot dip aluminizing (HDA) is widely used in industry for improving corrosion resistance of material. The formation of intermetallic compound layers during the contact between dissimilar materials at high temperature is common phenomenon. Generally, intermetallic compound layers of $Fe_2Al_5$ and $FeAl_3$ are formed at the Al alloy and Fe substrate interface. In case of cast iron, high contact angle of graphite existed in the matrix inhibits the formation of intermetallic compound layer, which carry with it the disadvantage of a reduced reaction area and mechanical properties. In present work, the process for the removal of graphite existed on the surface of specimen has been investigated. And also HDA was proceeded at $800^{\circ}C$ for 3 minutes in aluminum alloy melt. The efficiency of graphite removal was increased with the reduction of particle size in sanding process. Graphite appears to be present both in the region of melting followed by re-solidification and in the intermetallic compound layer, which could be attributed to the fact that the surface of cast iron is melted down by the formation of low melting point phase with the diffusion of Al and Si to the cast iron. Intermetallic compound layer consisted of $Fe(Al,Si)_3$ and $Fe_2Al_5Si$, the layer formed at cast iron side contained lower amount of Si.

• Restorative Dentistry and Endodontics
• /
• 제9권1호
• /
• pp.101-106
• /
• 1983

It was the purpose of this study to investigate the fracture mode of dental amalgam by observing the crack propagation, and to relate this to the microstructure of the amalgam. Caulk 20th Century Regular, Caulk Spherical, Dispersalloy, and Tytin amalgam alloys were used for this study. After each amalgam alloy and Hg measured exactly by the balance was triturated by the mechanical amalgamator (Capmaster, S.S. White), the triturated mass was inserted into the cylindrical metal mold which was 4 mm in diameter and 12 mm in height and was pressed by the Instron Universal Testing Machine at the speed of 1mm/min with 120Kg. The specimen removed from the mold was stored in the room temperature for a week. This specimen was polished with the emery papers from #100 to #200 and finally on the polishing cloth with 0.06${\mu}Al_2O_3$ powder suspended in water. The specimen was placed on the Instron testing machine in the method similar to the diametral tensile test and loaded at the crosshead speed of 0.05mm/min. The load was stopped short of fracture. The cracks on the polished surface of specimen was examined with scanning electron microscope (JSM-35) and analyzed by EPMA (Electron probe microanalyzer). The following results were obtained. 1. In low copper lathe-cut amalgam, the crack went through the voids and ${\gamma}_2$ phase, through the ${\gamma}_1$ phase around the ${\gamma}$ particles. 2. In low copper spherical amalgam, it was observed that the crack passed through the ${\gamma}_2$ and ${\gamma}_1$ phase, and through the boundary between the ${\gamma}_1$ and ${\gamma}$ phase. 3. In high copper dispersant (Dispersalloy) amalgam, the crack was found to propagate at the interface between the ${\gamma}_1$ matrix and reaction ring around the dispersant (Ag-Cu) particles, and to pass through the Ag-Sn particles. 4. In high copper single composition (Tytin) amalgam, the crack went through the ${\gamma}_1$ matrix between ${\eta}$ crystals, and through the unreacted alloy particle (core).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.138-138
• /
• 2003

Low temperature co-fired ceramic (LTCC) technology offers significant benefits over the other established packaging technologies for high density, high microwave frequency, and fast signal application. Most conventional electroceraramics do not meet the basic requirements in respect of sinterability for LTCC technology. Attention is, therefore, focused on the role of glasses because of the capability they supply with lower sintering temperatures. In this study, commercial ceramic (MBRT-90) in the system BaO-N $d_2$ $O_3$-Ti $O_2$ (BNT: 40 ~ 80 wt%) and L $a_2$ $O_3$- $B_2$ $O_3$-Ti $O_2$ glass (LBT;60 ~ 20 wt%) were prepared. These glass/ceramic composites were evaluated for sintering behavior, phase evaluation, densities, interface reaction, crystallinity, microstructure and microwave dielectric properties. It was found that the addition LBT glass frits significantly lowered the sintering temperature to below 90$0^{\circ}C$ and as temperature increased (750~90$0^{\circ}C$) densification developed dynamically which was meant to be as over 95% of relative density. It is supposed that in the microstructure, the grain size was increased accompanying with the formation of different phases such as LaB $O_3$ and Ti $O_2$ under the condition of increasing sintering temperature. The sintered bodies represented applicable dielectric properties, namely 20 ~ 40 for $\varepsilon_{{\gamma}}$, ~ 10000 GHz for Q* $f_{0}$ and 10~80 ppm/$^{\circ}C$ for $\tau$$_{f}$. The results suggest that the composite is one of feasible candidates for the microwave use in LTCC technology.y.e use in LTCC technology.y.