• 농업과학연구
• /
• 제41권4호
• /
• pp.455-460
• /
• 2014

In this study, structural behavior of plastic greenhouse foundation was investigated using rational finite element modeling for structures which have different material properties each other. Because the concrete foundation of plastic greenhouse and soil which surround and support the concrete foundation have very different material property, the boundary between two structures were modeled by a interface element. The interface element was able to represent sliding, separation, uplift and re-bonding of the boundary between concrete foundation and soil. The results of static and dynamic analysis showed that horizontal and vertical displacement of concrete foundation displayed a decreasing tendency with increasing depth of foundation. The second frequency from modal analysis of structure including foundation and soil was estimate to closely related with wind load.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.338-341
• /
• 1997

According to reports, it is impossible to make Ohmic Contact with high resistivity p type CdTe or CdZnTe semiconductor theoretically. But it is in need of making Ohmic Contact to fabricate semiconductor radiation detector By electroless deposition method using gold chloride solution, we made Ohmic Contact of Au and p-Cd$_{80}$Zn$_{20}$Te which grown by High Presure Bridgman Method in Aurora Technologies Corporation. We investigated the interface with Rutherford Backscattering Spectrometry and Auger electron spectroscopy. And we evaluated the degree of Ohmic Contact for the Au/CdZnTe interface by the I/V characteristic curve. As a result, we concluded that it showed excellent Ohmic Contact property by tunneling mechanism through the interface.e.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.3-6
• /
• 2004

In order to reduce the excessive numerical dissipation which is induced when a grid system is not aligned with a discontinuity, a new spatial treatment of cell-interface fluxes is introduced. The M-AUSMPW+ in this paper has the formula that has an additional procedure of re-defining transferred properties at a cell-interface, based on AUSMPW+. The newly defined transferred property could eliminate numerical dissipation effectively in non-flow aligned grid system of multi-dimensional flows.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.39-44
• /
• 2014

The elemental composition of electro-deposited black Cr solar selective coatings before and after heating in air by using secondary ion mass spectrometry (SIMS) was investigated for optical property analysis. In addition, black Cr selective coating exposed by solar radiation for 5 months was compared with heated sample. SIMS investigation shows that $OH^+$ bearing ions were related to a near surface region of CrOH and CrO compound. The optical degradation of this coating after heating at $500^{\circ}C$ reveals that diffusion of the Cu and Ni elements in substrate material, the chemical interactions adjacent to the interface, and the interface width broadening.

• 한국컴퓨터산업학회논문지
• /
• 제2권6호
• /
• pp.803-816
• /
• 2001

본 논문에서는 결함허용(Fault Tolerant) 시스템에 의해 발생된 2진 신호를 고장안전(Fail-Safe) 신호로 변환하는 SFS(Strongly Fail-Safe) 인터페이스를 설계하였다. SFS 특성은 자체검사(Self-Checking) 기법을 근거로 만족할 수 있었으며, 이러한 인터페이스는 개별 부품에 의한 기존의 고장안전 인터페이스 설계와는 달리 집적화 가능성을 보여 주었다. 또한 고장안전 시스템 설계에 대한 정의를 함으로써 새로운 시스템 구현 방법을 제시하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.379-382
• /
• 2000

We designed a self-timed interface circuit for efficient communication in IP (Intellectual Property)-based system with high-speed self-timed FIFO and a set of self-timed event logic library with 0.25um CMOS technology. Optimized self-timed standard cell layouts and Verilog models are generated for top-down design methodology. A method for mitigating a design bottleneck when it comes to tolerate clock skew is described. With clock control method and FIFO, we implemented high-speed 32bit-interface chip for self-timed system, which generated maximum system clock is 2.2GHz. The size of the core is about 1.1mm x 1.1mm.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.26-30
• /
• 2001

Creep crack growth lift of high temperature pressure equipments was assessed for various crack locations and for various material properties. Surface cracks at the inner and outer surface of the vessel in the axial and circumferential directions were considered. The crack was located in the weld metal, in the parent metal or at the weld interface. Results shored that the crack at the weld interface was the most dangerous one. The crack located outside is weaker than that located inside. Safety factors of the case in which improper material properties were used the to unavailability of the correct material properties were discussed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.409-412
• /
• 2002

본 논문에서는 PC 유저 인터페이스에 관한 것으로 T33521을 기반으로 한 MMC, SSFCD 카드의 인터페이스를 구현하였다. 이는 12Mbit/s의 USB를 활용하고 있으며 윈도우 98등에서 동작 가능하다. 또한 8/16M 그리고 32M SMC 플래쉬 메모리에 대한 읽기/쓰기 모드 및 다양한 유틸리티 프로그램을 구현하였다.

• 한국주거학회논문집
• /
• 제17권1호
• /
• pp.37-45
• /
• 2006

The purpose of this study is to explore the spacial boundary in Kazuyo Sejima's housing architecture, to give attention to contemporary housing architecture that we inhabit, and to escape from existing architectural concepts. This study seeks to the meaning and possibility of the spacial boundary on the basis of contemporary architecture. The spacial boundary can be studied in the aspect of architectural space that molds human experience and perception. As a result of this study, three properties in the spacial boundary are revealed. One property of the spacial boundary is soft that protect privacy from gaze of exterior. Another property is that communication that changes according to material of boundary and its experience of observer. The other property is to have uncertainty by compound of programs and material-mixing senses including its perception. This results means that the spacial boundary as interface which is represent our everyday life in the contemporary housing architecture.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권5호
• /
• pp.206-206
• /
• 2003

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, glass surface was treated by plasma to examine the effect of dry interface treatment without coupling agent. It was identified that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.