• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.546-552
• /
• 2012

This paper is a study on squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material. For this, data of pressure and temperature dependent material properties of lining is achieved by using lining data base and exponential curve fit. Complex eigenvalue analysis is performed for predicting squeal noise frequency and instability and chassis dynamo test is performed for achieving squeal noise frequency, sound pressure level, occurrence temperature & pressure. Initial multi models are composed for considering complex interface conditions such as pad ear-clip, piston-housing and guide pin-torque member. The simulation result of base models is compared with the test result. Squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material is performed and analyzed using multi models. And additional condition is disc material property variation. Entire simulation conditions are combined and analyzed. Finally, this paper proposes direction of the warm squeal noise model.

• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.7-16
• /
• 1987

This study was carried out to develop a microcomputer-based data acquisition and control system which was able to collect the data of engine performance test automatically and control the speed and load of the engine. The results of the study are summarized as follows: 1. The signal processing devices, which were able to measure cylinder pressure, coolant temperature, compositions of exhaust gas, fuel consumption, engine rpm and torque etc., were developed. The results of calibration showed that all of devices had high accuracy ranging from 0.3% to 0.69% respectively. 2. The PIA (peripheral interface adapter) for interfacing digital signal and PTM (programmable timer module) for displaying real time every 0.0408 sec were designed and developed. 3. An engine-speed control system using a stepping motor and driver was developed. The control system had the stability, and faster settling time than the manual control system. 4. The automatic control system of electrical dynamometer, which was able to control the speed and load of dynamometer, was developed with a SSD (shackleton system driver) and D/A converter. 5. The computer programs, which were able to collect and process the data of engine tests, were developed using both the machine language and BASIC.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.157-166
• /
• 2008

There has been a renewal of interest in management of underground facility in recent years. As several research have been made on management for underground facility of waterworks pipe. In this paper smart-tag is defined and applied to requiring ubiquitous environment. Also, GPS is essential technology for the implementation of proposed program, which has GPS and RFID mixed business model. And it manages data of underground facility with RFID system effectively and provides the high quality practical effectiveness of entire system through GPS receiving module and network communication on GIS. In conclusion, this paper proposed applications management system with location mixed database. Proposed database and interface skill is tested and evaluated through the simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1751-1767
• /
• 2016

Home security has become the prime concern for everyone in present scenario. In this work an attempt has been made to develop a home security system which is accessible, affordable and yet effective.The proposed system is based on 'Remote Embedded Control System' (RECS) which works both on the web and gsm platform for authentication and monitoring. This system is therefore cost effective as it relies on existing network infrastructure. As PCA is most popular and efficient algorithm for face recognition, it has been usedin this work. Next to it an interface has been developed for communication purpose in the embedded security system through the ZigBee module. Based on this embedded system, automated control of door movement has been implemented through electromagnetic door lock technology. This helps the users to monitor the real-time activities through web services/SMS. The web service consists of either web browser command or e-mail provision. The system establishes the communication between the system and authenticated user. The e-mail received by the system from the authorized person will monitor and control the real-time operation and door lock. The entire control system is reinforced using ARM1176JZF-S microcontroller and tested for actual use in the home environment. The result shows the experimental verification of the proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.873-892
• /
• 1998

In this paper, we propose an architecture of multimedia communication terminal that can e used in broadband ISDN environments. To design and implement the multimedia communication terminal, we analyzed the structure of multimedia terminals and the types of services which is recommended by public and private standard or ganization, such as ITU-T, Digital Audio-Visual Council(davic) and ATM Forum. The multifunctional communication terminal designed in this paper could allow inter-working between existing communication terminals on the heterogeneousnetwork and accept current and advanced multimedia communication application flexible. An implemented terminal is consisted of the multimedia processing board and the ATm interface board that is installed in PCI bus on personal computer. The integrated service multimedia communication terminal that is implemented supports retrieval, distributive and conversational communication service simultaneously. And then we performaned functional module test according to the individual communication services.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.6
• /
• pp.249-255
• /
• 2005

In recent years, a novel tiny piezoelectric linear motor converting a radial mode vibration to a longitudinal mode vibration driven by the impact force has been developed for a camera optical module. The tiny piezoelectric motor is consisted of a shaft, mobile element, and piezoelectric transducer. In this work, the frictional coefficient and static friction force of the interface between the shaft and the mobile element have been investigated according to their respective materials. It was found that two combinations, namely Pyrex glass or stainless steel for the shaft and stainless steel (SUS) for the mobile element, exhibited good dynamic behaviors in the tiny ultrasonic linear motor, which was newly developed based on operating concepts based on Newton's law.

• Structural Engineering and Mechanics
• /
• v.37 no.2
• /
• pp.197-213
• /
• 2011

Concrete is a heterogeneous material exhibiting quasi-brittle behaviour. While homogenization of concrete is commonly accepted in general engineering applications, a detailed description of the material heterogeneity using a mesoscale model becomes desirable and even necessary for problems where drastic spatial and time variation of the stress and strain is involved, for example in the analysis of local damages under impact, shock or blast load. A mesoscale model can also assist in an investigation into the underlying mechanisms affecting the bulk material behaviour under various stress conditions. Extending from existing mesoscale model studies, where use is often made of specialized codes with limited capability in the material description and numerical solutions, this paper presents a mesoscale computational model developed under a general-purpose finite element environment. The aim is to facilitate the utilization of sophisticated material descriptions (e.g., pressure and rate dependency) and advanced numerical solvers to suit a broad range of applications, including high impulsive dynamic analysis. The whole procedure encompasses a module for the generation of concrete mesoscale structure; a process for the generation of the FE mesh, considering two alternative schemes for the interface transition zone (ITZ); and the nonlinear analysis of the mesoscale FE model with an explicit time integration approach. The development of the model and various associated computational considerations are discussed in this paper (Part 1). Further numerical studies using the mesoscale model for both quasi-static and dynamic loadings will be presented in the companion paper (Part 2).

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.221-224
• /
• 2010

PACS(Picture Archiving Communication System)를 바탕으로 하는 DICOM(Digital Imaging and Communications in Medicine)은 주요 의료영상장비들 사이에 데이터와 영상을 효율적으로 교환하고 전송할 수 있도록 마련한 표준안으로 현재 대부분의 최신형 의료영상장비(CT, MR, DSA, CR(Computed Radiology), 초음파검사, 핵의학검사, 내시경검사, 조직병리검사, 등)들은 의료 영상 분야의 국제 표준인 DICOM 표준방식에 의해 영상을 제공하고 있다. 최근 이러한 의료영상장비들은 독립적으로 사용하기보다는 의료수술 모니터링 장비 등의 비 의학영상장비와 서로 연계하여 사용하는 경우가 많아졌다. 그러나 이러한 의료수술 모니터링 장비들은 DICOM 표준 데이터를 고려하지 못하므로 PACS를 통한 데이터 연계에 어려움이 있다. 따라서 본 논문에서는 표준 DICOM 포맷과 의료수술 모니터링 장비의 데이터 구조를 분석하여 non-DICOM 의료수술 모니터링 장비의 PACS 연동을 위한 방안을 제안하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.174-177
• /
• 2016

Wireless network-on-chip (WNoC) can alleviate critical path problem of existing typical NoCs by integrating radio-frequency module on router. In this paper, core-connection-aware genetic algorithm-based core and WIR mapping methodology at small world WNoC is presented. The methodology could optimize the critical path between cores with heavy communication. The 33% of average latency improvement is achieved compared to random mapping methodology.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.11
• /
• pp.93-101
• /
• 2016

In this paper, we propose a new model, assembled ERP, to analyze the reason why the small and medium sized companies have a low ERP implementation rate and to solve this. As a result of our analysis, the high initial costs and time required for implementing ERP keep such companies from implementing it as they have relatively limited resources. The assembled ERP model, however, reduces the scale of ERP by developing the ERP for the unique business of each and connecting a few 3rd-Party applications as a module to make ERP for common work. Also it enables easier data utilization by drawing up an API list that connects the 3rd-Party applications to the developed ERP when the user lacks knowledge in the master data of the 3rd-Party applications. Therefore it lets the small and medium sized companies introduce the ERP more easily by reducing the costs for ERP implementation and user training.