• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.226-229
• /
• 2004

The temperature difference between die and workpiece has been frequently caused to various surface defects. The distribution and change for the temperature of forged part should be analyzed to prevent the generation of various defects related with the temperature. The surface temperature changes were mainly affected by the interface heat transfer coefficient. Therefore, the coefficient is necessary to predict the temperature changes of die and workpiece. The temperature calculated by FEM result might be well compared with the measured temperature. However, it is impossible to measure directly the temperature distribution of forged part. Therefore, the comparisons between measured temperature and predicted values are preformed by the microstructure in various temperature. Since the differences of microstructure could be obvious, the temperature criteria is set near by the incipient melting temperature. The predicted temperatures are well coincided with the measured values.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.486-488
• /
• 1987

Studine the characteristic or C.T.I affectine on the tracking failure when interface active materials are diffused into the phenolic resin. we conclude as follow: 1) As the density of $NH_4Cl$ increase the quality or sludge increase the value of C.T.I decreases. 2) The materal of ion absorption can make the period of sludge metallic matal generation delay more than times and the value of C.T.I increase. 3) By addition of interface active material that makes forming period delay, the starting voltage of corona blackdown id delayed and the value of C.T.I is increased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.683-686
• /
• 1998

Hot carrier effects as a function of bias stress time and bias stress consitions were syste-matically investigated in p-channel poly-Si TFT s fabricated on the quartz substrate. The device degradation was observed for the negative bias stress, while improvement of electrical characteristic except for subthreshold slope was observed for the positive bias stress. It was found that these results were related to the hot-carrier injection into the gate oxide and interface states at the poly-Si/$SiO_2$interface rather than defects states generation within the poly-Si active layer under bias stress.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.25-31
• /
• 2023

The brain-machine interface(BMI) is a next-generation interface that controls the device by decoding brain waves(also called Electroencephalogram, EEG), EEG is a electrical signal of nerve cell generated when the BMI user thinks of a command. The brain-machine interface can be applied to various smart devices, but complex computational process is required to decode the brain wave signal. Therefore, it is difficult to implement a brain-machine interface in an embedded system implemented in the form of an edge device. In this study, we proposed a new type of brain-machine interface system using IoT technology that only measures EEG at the edge device and stores and analyzes EEG data in the cloud computing. This system successfully performed quantitative EEG analysis for the brain-machine interface, and the whole data transmission time also showed a capable level of real-time processing.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.177-178
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.397-398
• /
• 2011

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.05a
• /
• pp.36-40
• /
• 2003

근래에 들어 질병으로 인하여 의사표현이 곤란한 환자에게 뇌파에 기초한 BCI(Brain Computer Interface)와 같은 새로운 인터페이스를 제공하고자 하는 연구가 활발히 진행되고 있다. BCI를 위한 기초 연구로서 특정 자극에 대해 유발되는 뇌파의 측정과 분석은 BCI를 위한 뇌파의 패턴과 인터페이스의 설계에 중요한 역할을 한다. 이 연구의 목적은 시청각 자극 인가후 피험자의 반응 시간을 측정하는 시스템을 EEG와 같은 생체 신호 계측 시스템과 연동이 가능한 형태로 개발하는 것이다. 제안된 시스템은 기능적으로 자극 신호 발생부, 반응시간 측정부, 유발뇌파 측정부, 동기신호발생부로 나뉘어진다. 자극신호 발생부는 실험에 이용되는 자극신호를 제작하는 부분으로서 Flash를 사용하여 구현하였다. 반응시간 측정부는 문제에 대한 답 선택 요청시각으로부터 피험자의 반응까지의 시간을 측정하는 부분으로서 마이크로 컴퓨터(80C31)를 이용하여 구현하였다. 우발뇌파 측정부는 시판용 하드웨어와 소프트웨어를 그대로 사용하였다. 동기신호 발생부는 전체 시스템의 동기를 맞추기 위한 신호를 발생하는 부분으로서 문제제시, 답요구와 동기한 화면상의 명암 신호와 이를 검출하는 광센서로 구성하였다. 본 논문에서 제시한 방법에서는 기존의 유발진위 측정 및 자극시스템에 특정 모듈(반응시간 측정 장치, 동기신호 발생장치)만을 추가하여 실험자의 의도에 맞는 시스템을 설계할 수 있어 유발 뇌파 및 반응시간 측정을 필요로 하는 연구를 가속화 할 것이 기대된다.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.35-45
• /
• 2000

this paper presents the concept of "mobile ATM', a proposal for third-generation (3G) mobile communication network infrastructure capable of supporting flexible evolution of radio technologies from today's cellular and data services towards future wireless multimedia services. Mobile ATM provides generic mobility management and QoS-based transport capabilities suitable for integration of multiple radio access technologies including cellular voice. wireless data, and future broadband wireless services. The architecture of a mobile ATM network is outlined in terms of the newly-defined "W-UNI" interface at the radio link and "M-UNI"and "M-UNI" interface which supports unified access for WATM and non-ATM mobile terminals through corresponding interworking functions (IWF) is explained. leading to an understanding of how different radio access technologies are supported by the same ATM-based core network infrastructure. Generic mechanisms for handoff and location management within the core mobile network are discussed. and related protocol extensions over the "W-UNI" and "M-UNI/NNI"interfaces are proposed. the issue of "crossover switch (COS)" selection in mobile ATM is considered, and a unified handoff signaling syntax which supports flexibility in COS selection is described. Typical signaling sequences for call connection and handoff using the proposed protocols are outlined. Experimental results form a proof-of-concept mobile ATM network prototype are presented in conclusion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5B
• /
• pp.286-294
• /
• 2007

In ASIP design, compiler is required for performance evaluation of processors being designed. The design of machine specific compiler is time consuming. This paper presents the system which generates C compiler from MDL descriptions. Compiler generation using MDL can support user retargetability and concurrency between compiler design and processor design. However, it must overcome semantics gap between compiler and machine. To handle this problem, the proposed system maps behavioral descriptions to library which contains abstract behavior for each tree pattern. Using mapped instructions and information on register file usage, the proposed system generates back-end interface function of the compiler. Generated compilers, for MIPS R3000, ARM9 cores, have been proved by application programs written in C code.

• Smart Media Journal
• /
• v.2 no.4
• /
• pp.34-40
• /
• 2013

Rapid sequencing of individual genomes with next generation sequencer opens new horizon to biology and personalized medicine. The analyzed sequences help to check several genomic abnormality, genomic expression, epigenomic phenotypes, gene annotation after assembly of their reads. Several trials integrating genomic information and clinical data will assist disease diagnostics and clinical treatments. To have a large step towards individualized medicine, development of smart interface linking specialized sequence data to the public is necessary.