• Journal of Advanced Marine Engineering and Technology
• /
• 제31권7호
• /
• pp.833-841
• /
• 2007

The aim of this paper is to analyze the conjugate problems of heat conduction in solid walls coupled with laminar free convection flow adjacent to a vertical flat plate under boundary layer approximation. Using the similarity transformations the governing boundary layer equations for momentum and energy are reduced to a system of partial differential equations and then solved numerically using Finite Difference Method(FDM) known as the Keller-box scheme. Computed solutions to the governing equations are obtained for a wide range of non-dimensional parameters that are present in this problem, namely the coupling parameter P. the Prandtl number Pr and the heat generation parameter Q. The variations of the local heat transfer rate as well as the interface temperature and the friction along the plate and typical velocity and temperature profiles in the boundary layer are shown graphically. Numerical solutions have been consider for the Prandtl number Pr=0.70

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.70-75
• /
• 2003

Spot welding is a process that sheet metals are joined in one or more spot by heating at the faying interface. In this process, the spatter is dispersed from melted area. It has been reported that spatter generation has adverse effects on weld quality. However, no systematic study has been carried out to find out its effect on weld quality in resistance spot welding processes. In this study, specially designed specimen are used to perform experimental investigation of spatter generation and its effect. Major finding of this study show trends in tensile-shear strength for various amounts of spatter generated during spot welding process. Thus, optimum welding conditions are proposed in view of spatter generation and tensile-shear strength. (Received December 11, 2002)

• 대한전기학회논문지:전력기술부문A
• /
• 제53권11호
• /
• pp.589-595
• /
• 2004

This paper presents a modeling and simulation of a grid-connected wind turbine generation system with respect to wind variations, starting of large induction motor and three-phase fault in the system, and investigates voltage variations of the system for disturbances. It describes the modeling of the wind turbine system including the drive train model, induction generator model, and grid-interface model on MATLAB/Simulink. The simulation results show the variation of the generator torque, the generator rotor speed, the pitch angle, terminal voltage, system voltage, fault current, and real/reactive power output, etc. Case studies demonstrate that the pitch angle control is carried out to achieve maximum power extraction for wind speed variations, starting of a large induction motor causes a voltage sag due to a large starting current, and a fault on the system influences on the output of the wind turbine generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.52-54
• /
• 2000

In PV power generation system study, huge system apparatuses are needed in order to verify the effect of system efficiency and stability considering the size of solar panels, the sort of converter types, and the load conditions and so on. And also, under the same weather and load conditions it is impossible to compare a certain MPPT control scheme to others. In this paper, in order to obtain effective solutions for the above mentioned topics, the solar cell array is simulated with it's VI characteristic equations, and the real field data of weather conditions is interfaced to EMTDC using Fortran program interface method. Consequently the simulation of PV power generation system using field data is realized in this paper, and acceptable results, which show close match between the real data of PV panel and the simulated data, were obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1070-1072
• /
• 1999

Automatic Generation Control(AGC) is a control system whose objectives are to hold system frequency close to a specified nominal value and to maintain each unit's generation at the most economic value. It has been used to control the output of a generator by the control signal of the generator, but it is not appropriate to apply to generators which adopt the distributed control system. In this paper a method for improving the AGC operation is proposed, and the different response of each generator and various types of control systems of generators are considered. The interface among Remote Terminal Detector(RTU) and control systems and the direct delivery of the data between EMS and DCS also are proposed in the paper.

• Journal of the Optical Society of Korea
• /
• 제10권4호
• /
• pp.188-195
• /
• 2006

Third harmonic generation microscopy is described in the frame work of the theory of harmonic generation with Gaussian focused beams inside a bulk material as well as at the vicinity of an interface. This model is then applied to characterize different types of materials in terms of electronic third-order susceptibility. Examples of bulk glasses, poled glasses, laser-induced modifications in glasses and nanoparticles in solution are given in order to give a survey of the broad application field of THG microscopy in material characterization.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.61-69
• /
• 2010

This paper presents a study of a DFIG wind power generation system for real-time simulations. For real-time simulations, the Real-Time Digital Simulator (RTDS) and its user friendly interface simulation software RSCAD are used. A 2.2MW grid-connected variable speed DFIG wind power generation system is modeled and analyzed in this study. The stator-flux oriented vector control scheme is applied to the stator/rotor side converter control, and the back-to-back PWM converters are implemented for the decoupled control. The real-wind speed signal extracted by an anemometer is used for a realistic, reliable and accurate simulation analysis. Block diagrams, a mathematical presentation of the DFIG and a control scheme of the stator/rotor-side are introduced. Real-time simulation cases are carried out and analyzed for the validity of this work.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.512-513
• /
• 2012

사용자 인터페이스 기술은 사용자가 조작하는 메뉴나 체제로 인해 인터페이스가 변화하는 기술이다. 최근 사용자의 편리를 위한 사용자 인터페이스에 대한 연구가 국내외에서 진행 중에 있다. 이에 본 논문에서는 사용자의 조작에 따른 사용자 인터페이스를 개발하기에 앞서 기본적인 모델 기반의 사용자 인터페이스 기술에 대해 연구한다. 이를 위해, 사용자 인터페이스 요소 기술 분석, 사용자 인터페이스 표준 기술 분석, 모델 기반의 사용자 인터페이스 모델의 요구 사항 도출하는 과정에 대해 연구하였다. 이는 웹 응용 어플리케이션 적용방안 기술 확보 및 차세대 웹 어플리케이션 활용 적용하는데 활용될 것이다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.402-405
• /
• 2009

차세대 출판문인 디지로그 북은 기존 서적과 디지털콘텐츠를 통합하여 사용자에게 아날로그적 감성과 디지털오감을 제공한다. 이러한 디지로그 북을 제작하기 위해 디지로그 북의 저작도구에 대한 연구가 진행 중이며, 본 논문에서는 디지로그 북에 사용될 콘텐츠를 저작하는 활동에서 시각과 청각에만 의존한 작업을 보다 실감 있도록 하기 위해 펜형 햅틱 사용자인터페이스를 개발하고자 하였다. 햅틱 사용자인터페이스는 디지로그 북을 저작하는 작업에서 3차원 작업공간에서 공간상에 배치되는 3차원 객체를 이동, 회전, 크기 변경 및 메뉴선택 버튼의 클릭등과 같은 다양한 작업에서 각 작업을 보다 실감 있게 하기 위한 진동 햅틱 효과를 사용자에게 제공한다. 본 연구에서는 이러한 디지로그 북의 저작 환경에 적합한 사용자인터페이스의 외형, 회로 설계, 진동패턴의 설계/내장 및 저작시스템과의 연동을 위한 프로토콜을 정의하고 이렇게 개발된 햅틱 사용자인터페이스를 사용하여 사용자평가를 간단히 실시하였다. 디지로그 북 저작 작업에서 이렇게 개발된 햅틱 인터페이스의 촉각 효과를 시청각정보와 함께 사용함으로써 디지로그 북 저작 작업을 보다 효과적으로 할 수 있기를 기대한다.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.227-237
• /
• 1999

As the interface bonding phenomenon between the matrix and the reinforcements has a large effect on the mechanical properties of MMCs, a sugestion of the strength analysis technique considering the residual stress and the interface bonding phenomenon is very important for the design of pans and the estimation of fatigue behavior. In this paper the three dimensional finite element anaysis is performed during the elasto-plastic deformation of the particulate reinforced metal matrix composites. It was analyzed with the volume fractions in view of microscale. Bonding strength. interface separation and matrix void growth between the matrix and the reinforcements will be predicted on deformation under tensile loading. An interface seperation is estimated by the fracture criterion which is a critical value of generalized plastic work per unit volume. The shape of the reinforcement is assumed to be a perfect sphere. And the type of the reinforcement distribution is assumed as FCC array. The thermal residual stress in MMCs is induced by the heat treatment. It is included at the simulation as an initial residual stress. The element birth and death method of the ANSYS program is used for the estimation of the interface bonding strength, void generation and propagation. It is assumed that the fracture in the matrix region begin to occur under the external loading when the plastic work per unit volume is equal to the critical value. The fracture strain will be defined. The experimental data of the extruded $SiC_p$>/606l Al composites are compared with the theoretical results.