• 방사선산업학회지
• /
• 제5권1호
• /
• pp.95-99
• /
• 2011

The electrical and mechanical properties of electrode for radiation detection are very important. In general, Au electrode and CZT crystal are combined to form ohmic contacts, and the best energy resolution is shown at the Au electrode. The metal contacts are fabricated by electroless deposition method, sputtering deposition method and thermal evaporation method. The electrode fabrication is easy with use of the thermal evaporation method, while an adhesive strength is weak. Thus interface materials such as Ag, Al and Ni were investigated to overcome defects generated by the this method. The thickness of the interface material between the Au electrode and the CZT crystal was 100 Angstroms, the Au electrode with thickness of 400 Angstroms was deposited. The Al+Au electrode is shown that the results of current-voltage and radiation response are similar to results of Au electrode.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.453-458
• /
• 2016

CFRP (Carbon Fiber Reinforced Plastic) and CFRP-metal stacks have recently been widely used in the aerospace and automobile industries. When CFRP is machined by a brittle fracture mechanism, defect generation behaviors are different from those associated with metal cutting. The machining quality is strongly dependent on the properties of CFRP materials. Therefore, process control for CFRP machining is necessary to minimize the defects of differently manufactured CFRPs. In this study, defects in drilling of CFRP substrates with a variety of fiber directions and resin types are compared with respect to thrust force. An experimental study on material interface detection is carried out to investigate its benefits in process control.

• 대한의용생체공학회:의공학회지
• /
• 제19권3호
• /
• pp.261-268
• /
• 1998

위전도는 피부전극을 이용하여 위에서 발생하는 전기신호를 측정하여 위운동상태를 측정하는 비관혈적인 검사방법이다. 본 연구에서는 임상적으로 유용한 위전도신호 측정 및 분석시스템을 개발하였으며, 개발시스템은 크게 하드웨어(생체증폭기, 필터)와 소프트웨어(유저인터페이스, 분석알고리듬, 환자데이터베이스)로 구성된다. 개발시스템의 생체신호증폭기는 신호분석에 용이하도록 3채널로 구성되어 있으며, 신호의 저장 및 분석은 PC에서 수행하도록 구성되어 있다. 위수축 정보의 획득을 위해서 분석신호는 16Hz로 샘플링하였으며, 위전도신호분석은 임상이용에 유용한 여러 가지 분석 파라메터를 추출할 수 있도록 하였다. 개발된 시스템은 동물실험을 통하여 성능을 평가하였으며, 현재 환자를 대상으로 임상시험이 진행중이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.341-348
• /
• 2009

Various types of micro cone penetrometers have been developed by using strain gages for the layered soil detection. Strain gages, however, are affected by several factors such as temperature, self heating and lead wire length. In this study, micro cone penetrometers with 3~7mm in diameter, are developed by using FBG sensor to overcome the defects of the strain gage, and compensate the effect of temperature during penetration. In order to verifiy the accuracy and reliability of the developed FBG cone, the cone penetration test is performed on the layered soil. The tip resistance of FBG snesor shows excellent sensitivity, and can detect the interface of the layered soils with higher resolution. In addition, the 3mm micro cone penetrometer which is impossible cone diameter by using strain gages presents much higher sensitivity than the 7mm cone penetrometer. This study suggests that FBG sensor is a useful sensor for manufaturing the ultra small sized cone, and effectively detects the interface of the layered soil.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1499-1502
• /
• 2002

A method for acquiring an environmental map by integrating distance data obtained by sonars of a moving robot with web interface is proposed. Sonar data contains outliers in some cases such as ultrasonic beam is projected onto a corner of an object. Therefore, the influence of the outliers should be reduced by detecting outliers. In our method, the outliers are detected by two ways: (i) a method considering geometrical .elation among the observed surface and the projected ultrasonic beau, and (ii) a method considering consistency with data obtained by other sonars. By measurement by the sonar, the distance from the sonar to the obstacle is obtained. Assuming the two dimensional space we can know that the inside of the sector, whose renter coincide with the sonar and whose radius is equal to the obtained distance, is the free area, and a part of the arc of this sector is the obstacle area. The generation of the environmental map is done by integrating the free area and the obstacle area obtained by each measurement by the sonars. Before the integration, the outliers detection is done by two ways mentioned above. Experimental results show that obtained maps obtained by our methods with outliers defection are much better than those by a method without outliers detection.

• 대한전자공학회논문지TC
• /
• 제45권2호
• /
• pp.6-12
• /
• 2008

본 논문에서는 상향 링크 케이블 모뎀 시스템에 대한 동기화 방법에 대하여 제안하였다. 상향 링크의 케이블 모뎀 시스템은 DOCSIS(data over cable service interface specification) 규격에 의해 정해져 있으며, 이에 맞는 동기화 방법에 관하여 연구하였다. 케이블 모뎀은 버스트 모드로 동작하며 시 분할 다중 접속(time division multiple access, TDMA) 버스트 포맷을 사용한다. 버스트 포맷은 프리앰블과 데이터 구간으로 나뉜다. 본 논문에서는 프리앰블을 이용한 프레임 동기, coarse 타이밍 동기, 반송파 주파수 동기, 반송파 각 동기 방법을 연구하였으며, 프리앰블로 이용할 시퀀스로 correlation 특성이 우수한 CAZAC(constant envelope zero-autocorrelation) 시퀀스를 이용하였다. 또한 타이밍 드리프트가 존재하는 경우와 나머지 주파수 오프셋이 주는 영향을 고려하여 데이터 구간에서 심벌 타이밍 동기방식과 주파수 각 오프셋 추정박식을 채택하여 시스템을 구성하였고, 이를 컴퓨터 실험 결과를 이용하여 성능을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1534-1535
• /
• 2007

This paper describes a novel microfluidic device with a microfabricated electrospray source for a sheathless electrospray ionization interface to a mass spectrometer. This electrospray ionization-mass spectrometry (ESI-MS) device consists of a triangular-shaped metal emitter, allowing the generation of an efficient electrospray for peptide detection, and microfluidic channels monolithically in a glass microchip. The performance of the proposed interface was evaluated by opimizing its experimental condition and spraying standard peptides. The spraying has high signal strength and stability, with a relative standard deviation of 2.9% and singly-charged and doubly-charged peaks of the peptides were successfully detected. The metal emitter source showed a good performance to be comparable to commercially available emitters in signal strength and stability.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2197-2204
• /
• 2005

The combination of Gas chromatography (GC) for separation and Flame Ionization Detection (FID) for detection and identification of the components of a mixture of compounds is a fast and strongly proved method of analytic chemistry. The objective of this research was to design a combined High-speed miniature screening Gas chromatograph along with a Flame Ionization Detector for quick, quantitative and qualitative analysis of gas components. This combined GC-FID system is suitable to detect the volatile and semi-volatile hydrocarbons present in a gas mixture. The construction made it less expensive, easy to use and movable. The complete gas path was developed. On/off valves, temperature and flow sensors and their interface electronics were used for controlling purpose. A Microcontroller was programmed to measure the temperature and gas flow using the sensors and to control and regulate them using the electronics and valves. A pocket PC with its touch screen served as a user interface for the system. Software was developed for the pocket PC, which makes the communication possible with the Microcontroller. The system parameters can be indicated in the Pocket PC as simple text and also the analysis result can be displayed.

• 인터넷정보학회논문지
• /
• 제7권3호
• /
• pp.143-153
• /
• 2006

얼굴 특징 검출은 HCI, 얼굴 인식, 얼굴 추적, 표정 인식 및 이미지 데이터 검색등과 같은 응용분야의 근간 기술이다. 실시간 환경에서 얼굴 특징 검출을 처리하기 위해서는 검출 알고리즘의 속도가 중요한 관건으로 작용하고 있다. 또한 빛의 변화, 대상의 위치, 각도, 복잡한 배경등과 같은 요인들은 얼굴 특징 검출 알고리즘의 검출율을 낮추는데 영향을 미치므로 이를 개선한 방법이 필요하다. 본 연구에서는 검출율과 검출 속도를 동시에 개선한 알고리즘을 제안한다. 제안 알고리즘은 얼굴 이미지에 빛 보상 알고리즘인 CLAHE를 이용하여 빛의 변화에 강건하도록 이미지를 개선한 다음 얼굴 피부 영역을 검출한다. 검출한 피부 영역에서 얼굴 특징 포인트를 추출하기 위해 얼굴 특징의 외형기반 기하학적 성질을 이용한다. 제안 알고리즘은 얼굴 특징 검출의 정확도를 높일 뿐 아니라 빠른 검출 속도를 보임으로써 얼굴 추적, 인식 등과 같은 실시간 응용분야에 적용할 수 있다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (B)
• /
• pp.193-195
• /
• 2003

The analysis of EEG data is an important task in the domain of Brain Computer Interface (BCI). In general, this task is extremely difficult because EEG data is very noisy and contains many artifacts and consists of mixtures of several brain waves. The P300 component of the evoked potential is a relatively evident signal which has a large positive wave that occurs around 300 msec after a task-relevant stimulus. Thus automatic detection of P300 is useful in BCI. To this end, in this paper we employ a method of reference-based independent component analysis (ICA) which overcomes the ordering ambiguity in the conventional ICA. We show here. that ICA incorporating with prior knowledge is useful in the task of automatic P300 detection.