• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.280-283
• /
• 2000

여러 대의 컴퓨터를 사용하는 경우 프린터의 공유 방법에 관한 문제가 제기된다. LAN에 의한 프린터공유는 보편적이나, LAN이 설치되지 않은 환경에서는 프린터 공유기를 이용하거나 프린터를 이동시켜 인쇄를 하여야 한다. 본 연구에서는 컴퓨터와 프린터 사이에 무선으로 데이터를 송수신 한 수 있는 무선 인터페이스 프린터 공유기를 개발하였다. 이 장치를 이용함으로써 프린터의 이동 없이 최대 50미터 반경내의 다수의 컴퓨터와 시분할 방식의 공유가 가능하다. 본 장치는 프린터와 컴퓨터에 UHF 송수신 인터페이스 모듈을 각각 설치하여 데이터를 전송하며, 최대 전송속도는 9600bps이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.55-59
• /
• 2007

초음파를 이용한 추진기관의 접착 계면 검사는 결함 검출 능력과 경제성이 우수하다고 알려져 있다. 하지만, 추진기관의 접착 구조는 다중 계면이므로 송신 펄스와 수신 펄스의 시간 간격이 짧아서 반사 신호의 분리가 어렵기 때문에 초음파의 신호 분석에는 많은 시간과 노력이 소요된다. 이런 이유로 추진기관의 초음파시험은 연소관과 내열재 사이의 미접착 결함과 같이 극히 제한된 영역에 대해서만 자동화 시스템으로 수행하고 있다. 본 논문에서는 기존의 초음파시험으로 검출이 불가능했던 라이너와 추진제 미접착 결함을 초음파의 공진 현상과 램파 특성을 이용하여 검출하는 새로운 기법에 대해 기술하였다.

• 한국환경과학회지
• /
• 제23권12호
• /
• pp.1977-1985
• /
• 2014

Many countries around the world are amplifying interest and studies on irrigation, flood control and environment with concern on serious water problems. Especially for irrigation in water supply vulnerable areas such as coastal areas - islands, business on underwater resource security facilities are promoted to secure stable water resources due to development of society and increase of life quality. Also, various policies such as reuse of leaking underwater, utilization of underwater at waterfront, and artificial recharge, etc are planned and designed. In order to develop small sized underwater resource secure technology, verification of seawater-freshwater interface is executed and how the balance between these will develop is a great interest of coastal areas - islands. In this study, seawater-freshwater interface behavior analysis experiment was conducted while reflecting properties of coastal areas - islands and executed hydraulic similitude of saltwater intrusion form control technology on abstraction.

• 융합보안논문지
• /
• 제15권1호
• /
• pp.83-89
• /
• 2015

다수의 CCTV(Closed Circuit Television)로 광범위한 지역을 관리하는 보안 감시 시스템에서 시간과 장소에 구애받지 않고 CCTV를 원격으로 실시간 모니터링 할 수 있도록 어플리케이션을 설계 및 구현했다. Xcode를 사용하여 개발된 어플리케이션은 폐쇄적인 중앙 관제 시스템으로부터 안전한 관리자 인터페이스를 제공하는 역할을 한다. 효율적이며 직관적인 인터페이스를 통해 어플리케이션은 중앙관제 시스템에서 제공하는 실시간 상황 알림보고 및 상황 인지 추론 결과를 원격의 관리자에게 전달한다. 사용자의 편의를 위해, 어플리케이션은 이벤트 발생시의 push 알림, SNS(Social Network Service) 연동을 포함한 다양한 기능을 제공한다. 실시간 모니터링을 위해 카메라의 화면을 스트림 해줄 서비스는 Wirecast와 Wowza media server를 이용한다. Wowza stream engine은 실시간 스트리밍을 돕는 개발규격에 맞춘 URL을 제공한다. 이를 통해 모바일에서 실시간 스트리밍 결과를 받아 볼 수 있으며, 그 과정에서 발생되는 자원 소모에 관련된 성능분석을 보였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2014년도 추계 종합학술대회 논문집
• /
• pp.7-8
• /
• 2014

본 논문에서는 적외선 열 영상 카메라를 기반으로 한 스마트 화재 탐지 및 자동소화 시스템의 구현에 관한 것으로 스마트 화재감지 시스템 및 화재 발생 시 이를 초기에 진화 할 수 있는 자동소화 장치 인터페이스 플랫폼의 설계 및 구현에 관한 것이다. 시스템 개발의 주요 기능은 열 영상 카메라와 메가픽셀 카메라를 기반으로 하는 화재 탐지 영상 시스템 및 뷰어; 화재 발생 시 초기에 화재를 진화 할 수 있는 자동소화 장치시스템; 영상 시스템과 자동소화 장치 시스템을 연결해 주는 인터페이스 플랫폼이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.276-276
• /
• 2012

The interface morphology of organic active layers is known to play a crucial role in the performance of organic photovoltaic (OPV) cells. Especially, a controlled nanostructure with a large contact area between electron donor (D) and acceptor (A) layers is necessary to improve the power conversion efficiency (PCE) of the cells since the short exciton diffusion lengths in organic semiconductors limit the charge (hole and electron) separation before excitons recombination. In this work, we developed simple solvent treating methods to fabricate a nanostructured DA interface and applied them to enhance the PCE of ZnPc/C60 based small molecule OPV cells. Interestingly, it was observed that the solvent treatment on the donor layer prior to the deposition of the acceptor layer resulted in a significant decrease in PCE, which was due to an existence of undesirable voids at the DA interface. Instead, the solvent vapor treatment after the DA bilayer formation led to densely packed and well dispersed DA contacts. Consequently, 3-fold enhancement of PCE as compared to the untreated bilayer cell was accomplished.

• 한국주조공학회지
• /
• 제13권6호
• /
• pp.524-531
• /
• 1993

Dispersion behaviors of SiC particles and microstructures in Al-2%Si/SiCp composite prepared by Rheo-compocasting were studied with change of fabrication conditions(slurry temperature, agitation time) and additions of Mg($0{\sim}3wt.%$). Also, the microhardness change of matrix, interface and total in composites were examined with additions of Mg($0{\sim}3wt.%$). The dispersion of particles in the composites became relatively homogeneous with increase of Mg additions, agitation time and decrease of slurry temperature. Rate of occupied area by particle in matrix was increased as increase of Mg additions due to improvement of wettability between SiC particle and matrix. A favorable composites were obtained by melting under Ar atmospheric SiCp injection and bottom pouring system. According to the analysis of X-ray diffraction, $Mg_2Si$, $Al_4C_3$, $SiO_2$ and MgO, etc, intermetallic compounds were formed by chemical interreaction at interface of matrix and particles. The microhardness of interface is higher than that of matrix due to more strengthening of above intermetallic compounds. It was considered that the total hardness of the composites is improved by dispersing of SiCp and addition of Mg.

• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.155-160
• /
• 2003

Plasma spraying technique was used to fabricate functionally graded coating (FGC) of NiCrAIY/YSZ 8wt%$Y_2O_3-ZrO_2$ on a Co-base superalloy (HAYNES 188) substrate. Six layers were coated on the substrate for building up compositionally graded architecture. Conventional thermal barrier coating (TBC) of NiCrAIY/SZ with sharp interface was also fabricated. As-coated FGC and TBC samples were exposed at the temperature of $1100^{\circ}C$ for 10, 50, 100 hours in air. Microstructural change of thermally exposed samples was examined. Pores and microcracks were formed in YSZ layer due to evolution of thermal internal stress at high temperature. The amount of pores and microcracks in YSZ layer were increased with increasing exposure time at high temperature. High temperature oxidation of coatings occurred mainly at the NiCrAIY/YSZ interface. In comparison with the case of TBC. the increased area of the NiCrAIY/YSZ interface in FGC is likely to attribute to forming the higher amount of oxides.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.270-270
• /
• 2013

We have investigated the self-assembled structures of glutaric acid (HOOC-(CH2)3-COOH) on the Cu(110) surface as a function of coverage using Scanning Tunneling Microscopy (STM). At low coverage, glutaric acid molecules diffuse freely on Cu(110) surface at room temperature, thus they can't form ordered structures at this coverage. However, when we scanned the same area several times, novel structures have been created during scanning due to the field-induced self-assembly. Also, the induced structures are quite stable during continuous scanning process. At 0.25 ML, glutaric acid adsorbs as a bi-glutarate (-OOC(CH2)3-COO-) after annealing to 450 K producing a racemic conglomerate of coexisting mirror domains. Although the molecule is achiral, it forms chiral domains on the surface from adsorption-induced asymmetrization. At 0.5 ML coverage, zigzag structure is observed, and still gltutaric acid adsorbs as a bidentate configuration. This bi-glutarate structure is stable until 650. Finally, at 1ML, glutaric acid adsorbs as a mono-glutarate at room temperature forming close packed structures.

• 한국표면공학회지
• /
• 제30권6호
• /
• pp.374-381
• /
• 1997

We have studied the effect of the interface between tungsten silicide and polysilicon the silicide reaction. The results showed that the cleaning of the silicon surface prior to the deposition of tungsten silicide affected the interface properties, thereby leading to the difference in the resistivity and surface morhpology of tungsten silicide. Compared with HF cleaning, the use of SCl cleaning yielded higher resistivity of tungsten silicide at the low anneal temperature (up to $900^{\circ}C$). However, furtherature to $1000^{\circ}C$ reduced the resistivity significantly, similar to that obtained with HF cleaning. It was also observed that the annealing of WSix/HF-cleaned poly-si allowed the formation of bucking weve (partially decohesion area) on the surface. In contrast, the use of SCl celaning did not produce the buckling waves on the surface. Also the presence of 200$\AA$ -thick TiW between tungsten silicide and HF-cleaned poly-Si effectively prevented the formation of the waves. However, high-temperature annealing of WSix/200A-TiW/Poly-Si allowed the excess silicon in tungsten silicide to precipitate inside the silcide, causing the slight increase of the resistivity after annealing at $1050^{\circ}C$.