• ETRI Journal
• /
• v.30 no.1
• /
• pp.141-151
• /
• 2008

In this paper, we introduce a new verification platform with ARM- and DSP-based multiprocessor architecture. Its simple communication interface with a crossbar switch architecture is suitable for a heterogeneous multiprocessor platform. The platform is used to verify the function and performance of a DVB-T baseband receiver using hardware and software partitioning techniques with a seamless hardware/software co-verification tool. We present a dual-processor platform with an ARM926 and a Teak DSP, but it cannot satisfy the standard specification of EN 300 744 of DVB-T ETSI. Therefore, we propose a new multiprocessor strategy with an ARM926 and three Teak DSPs synchronized at 166 MHz to satisfy the required specification of DVB-T.

• Journal of the military operations research society of Korea
• /
• v.35 no.1
• /
• pp.95-103
• /
• 2009

HLA is the IEEE 1516 standard for the interoperation among heterogeneous simulations and RTI is a technology which provides a lower infrastructure service to interoperation. In this paper, we propose a Object-Oriented federate model architecture to enhance code reusability. It improves an efficiency of the system development process, and results in development time reduction and cost saving. It also is verified its practical effect through acting HLA certification on an software developed proposed architecture.

• Journal of Communications and Networks
• /
• v.8 no.4
• /
• pp.432-441
• /
• 2006

As the community antenna television (CATV) networks becomes ubiquitous, instead of constructing an entirely new broadband network infrastructure, it has emerged as one of the rapid and economic technologies to interconnecting heterogeneous network to provide broadband access to subscribers. How to support ubiquitous real-time multimedia applications, especially in a heavy traffic environment, becomes a critical issue in modern CATV networks. In this paper, we propose a time guaranteed and efficient upstream minislots allocation algorithm for supporting quality-of-service (QoS) traffic over data over cable service interface specification (DOCSIS) CATV networks to fulfill the needs of realtime interactive services, such as video telephony, video on demand (VOD), distance learning, and so on. The proposed adaptive fast expansion algorithm and the loading statistics with dynamic swapping algorithm have been shown to perform better than that of the multimedia cable network system (MCNS) DOCSIS.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.11a
• /
• pp.444-450
• /
• 2002

실세계의 사물을 다중측면에 의하여 분석한 후 개체노드, 측면개체노드, 균일성 개체 및 다중화 추상화라는 여러 개념을 이용하여 디자인할 수 모델인 I-Farmer 모델의 구현 방안을 제시하였다. 컴포넌트는 컴포지션에 의한 소프트웨어 블록 재사용성을 제공하며 컴포넌트는 이들의 수행하는 기능에 대한 명세를 나타내는 인터페이스 명세 모델이 반드시 필요하게 된다. 본 논문에서는 I-Farmer 모델링 방법론에 의하여 디자인되어진 시스템을 컴포넌트 기반개발의 인터페이스 명세 모델로의 변형(transformation) 메카니즘인 ITI 알고리즘 및 CORBA / JAVA RMI COM IDL과의 상호관련성을 제시한다.

• Journal of the Korea Society for Simulation
• /
• v.10 no.3
• /
• pp.1-14
• /
• 2001

A hybrid system is defined as a mixture of continuous systems and discrete event systems. This paper first proposes a framework for hybrid systems modeling, called Hybrid Discrete Event System Specification (HDEVS) formalism. It then presents a method for simulators interoperation in which a continuous system simulator and a discrete event simulator are executed together in a cooperative manner. The formalism can specify a hybrid system in a way that a continuos system and a discrete event system are separately modeled by their own specification formalisms with a support of well-defined interface. We call such interface an A/E converter for analog-to- event conversion and an E/A converter for event-to-analog conversion. Simulators interoperation is based on the concept of pre-simulation in which simulation time for a continuous simulator is advanced in accordance with a discrete event simulator.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1044-1051
• /
• 2004

This paper described a novel locomotion interface that can generate infinite floor for various surface, named as virtual walking machine. This interface allows users to participate in a life-like walking experience in virtual environments, which include various terrains such as plains, slopes and stair ground surfaces. The interface is composed of two three-DOF (X, Y, Yaw) planar devices and two four-DOF (Pitch, Roll, Z, and relative rotation) footpads. The planar devices are driven by AC servomotors for generating fast motions, while the footpad devices are driven by pneumatic actuators for continuous support of human weight. To simulate natural human walking, the locomotion interface design specification are acquired based on gait analysis and each mechanism is optimally designed and manufactured to satisfy the given requirements. The designed locomotion interface allows natural walking(step: 0.8m, height: 20cm, load capability: 100kg, slope:30deg) for various terrains.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06b
• /
• pp.67-71
• /
• 1996

We have developed an MPEG2 realtime codec system and ATM interface, and evaluated the performance and characteristics of the audio-visual communication in terms of Interoperability specification of The ATM Forum, ITU-T H.310 draft recommendation [1] and the reference points of DAVIC specification through the experiments using the experimental public ATM network.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1785-1794
• /
• 2000

This paper presents a computational object model supporting CM(Continuous Media) stream interfaces including QoS(Quality of Service) required in the distributed application method for the proposed stream interface including QoS. A stream interface consists of a data channel and a control channel. In this paper, the CORBA supporting communication channel is used as the control channel and various transport protocols can be used as the dta channel of the stream interface. Also, specifications of the application QoS are included in stream interface specification. In implementation, FIFO queues and timers are used to support transmission rate, delay and jitter control mechanisms of he stream interface.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.135-145
• /
• 2000

Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.131-134
• /
• 2000

This paper presents the circuit design and implementation of a HomePNA (Home Phoneline Network Alliance) 1M8 PHY transceiver for specification ver1.1. This paper describes a physical medium interface, an Ethernet MAC controller unit interface, and a management interface of the HomePNA transceiver. The designed HomePNA transceiver can support any specifications having more than 32Mbits/sec(maximum in HomePNA ver2.0) transmission rate by changing physical medium interface, because Ethernet MAC controller unit interface has been designed by using MII.