• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.257-265
• /
• 2006

다양한 정보기기들의 복합화 형태로 진화하는 차세대 텔레매틱스 시스템에서는 운전자의 안정성 확보와 workload 감소가 중요한 이슈로 대두되어 Interface의 단순화, GUI Interaction의 극복 등의 대한 문제해결이 중요시 되고 있다. 이를 위해 본 연구에서는 사용자의 mental model를 고려한 운전자의 자유로운 navigation을 지원할 eyes-free 기술인 haptic interface를 지원하는 모델 개발을 목표로 기존 haptic interface를 지원하는 기기들의 문제점을 도출하고 차세대 텔레매틱스 시스템의 분석을 통해 기능적 요구사항을 정의하였다. 이를 기반으로 사용자에게 haptic interface를 통한 interaction을 제공함으로써 차세대 텔레매틱스 시스템을 지원하는 conceptual model을 개발하였다. 또한 haptic device design시에 고려되는 평가지표들을 선별하여 평가지표의 계층적 구조도를 작성한 후 AHP평가 모델을 개발하여 haptic device design 시의 중요 고려사항을 도출하고 중요도를 산정하여 초기 design 단계에서의 prototype에 대한 객관적이고 정량적인 평가를 제공하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.530-537
• /
• 2013

An explicit surface potential calculation method of gate-all-around MOSFET (GAAMOSFET) devices which takes into account both interface trap charge and varying doping levels is presented. The results of the method are extensively verified by numerical simulation. Results from the model are used to find qualitative and quantitative effect of interface trap charge on subthreshold slope (SS) of GAAMOSFET devices. Further, design constraints of GAAMOSFET devices with emphasis on the effect of interface trap charge on device SS performance are investigated.

• 산업공학
• /
• 제20권4호
• /
• pp.560-567
• /
• 2007

The opening of ubiquitous computing era prompted rapid increase in information transfer between human and computer. Such changes in computing environment requires new computing interface. In this paper, we develop a user interface prototype and framework using Avatar in Ubiquitous computing environment, which can support an active communication between human and computer based on context information. To develop the new interface, its conceptual framework with specific context information is designed in advance. In addition, this study suggests the future goal of user interface using Avatar by suggesting the requirements of constructed prototype.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.423-431
• /
• 2008

With respect to thermal barrier coating, the analysis of interface cohesion and residual stress is important to the life of TBC from mechanical view point. Up to now, there is not a model of describing interface cohesion. In the paper, we give a simple model of computing residual stress and study the residual stress of TBC with ANSYS. The distribution of the residual stress in different interface topography and the relationship between the residual stress and the interface topography dimension are presented.

• 대한인간공학회지
• /
• 제29권4호
• /
• pp.655-659
• /
• 2010

The objective of this study is to quantitatively incorporate user observation into usability evaluation of mobile interfaces using monitoring techniques in first- and third-person points of view. In this study, an experiment was conducted to monitor and record users' behavior using Ergoneers Dikablis, a gaze tracking device. The experiment was done with 2 mobile phones each with a button keypad interface and a touchscreen interface for comparative analysis. The subjects included 20 people who have similar experiences and proficiency in using mobile devices. Data from video recordings were coded with Noldus Observer XT to find usage patterns and to gather quantitative data for analysis in terms of effectiveness, efficiency and satisfaction. Results showed that the button keypad interface was generally better than the touchcreen interface. The movements of the fingers and gaze were much simpler when performing given tasks on the button keypad interface. While previous studies have mostly evaluated usability with performance measures by only looking at task results, this study can be expected to contribute by suggesting a method in which the behavioral patterns of interaction is evaluated.

• 대한인간공학회지
• /
• 제29권4호
• /
• pp.661-665
• /
• 2010

Current subway station's office employee must perform safety management tasks by monitoring the various safety management systems. But these monitoring systems are limited in effective situational awareness and response to a state of emergency immediately. It is necessary to develop an integrated safety management system display. In this study, we developed subway station safety management system's (CCTV, fire detection & alarm system, screen door control equipment) integrated prototype display with ecological interface design framework and evaluated prototype display interface's usability with GOMS model. The result was that the ecological interface's performance was better than existing safety management system's interface.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.529-561
• /
• 2014

The two-phase turbulent flow past an interface-piercing circular cylinder is studied using a high-fidelity orthogonal curvilinear grid solver with a Lagrangian dynamic subgrid-scale model for large-eddy simulation and a coupled level set and volume of fluid method for air-water interface tracking. The simulations cover the sub-critical and critical and post critical regimes of the Reynolds and sub and super-critical Froude numbers in order to investigate the effect of both dimensionless parameters on the flow. Significant changes in flow features near the air-water interface were observed as the Reynolds number was increased from the sub-critical to the critical regime. The interface makes the separation point near the interface much delayed for all Reynolds numbers. The separation region at intermediate depths is remarkably reduced for the critical Reynolds number regime. The deep flow resembles the single-phase turbulent flow past a circular cylinder, but includes the effect of the free-surface and the limited span length for sub-critical Reynolds numbers. At different Froude numbers, the air-water interface exhibits significantly changed structures, including breaking bow waves with splashes and bubbles at high Froude numbers. Instantaneous and mean flow features such as interface structures, vortex shedding, Reynolds stresses, and vorticity transport are also analyzed. The results are compared with reference experimental data available in the literature. The deep flow is also compared with the single-phase turbulent flow past a circular cylinder in the similar ranges of Reynolds numbers. Discussion is provided concerning the limitations of the current simulations and available experimental data along with future research.

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.578-586
• /
• 2010

This paper describes a theoretical model and acoustic analysis of hysteresis of contacting surfaces subject to compression pressure. Contacting surfaces known to be nonlinear and hysteretic is considered as a simple spring that has a complex stiffness connecting discontinuous displacements between two solid contact boundaries. Mathematical formulation for 1-D interfacial wave propagation between two contacting solids is developed using the complex spring model to derive the dispersion relation between the interface wave speed and the complex interfacial stiffness. Existence of the interface wave propagating along the hysteretic interface is studied in theory and discussed by investigating the solution to the dispersion equation. Unlike the linear interface without hysteresis, there can exist only one distinct mode of interface waves for the hysteretic interface, which is anti-symmetric motion. The anti-symmetric mode of interface wave propagates with the velocity faster than the Rayleigh surface wave but less than the shear wave depending on the interfacial stiffness. If the contacting surfaces are compressed so much that the linear interfacial stiffness is very high, the hysteretic stiffness does not affect the interface wave velocity. However, it has an effect on the speed of interface wave for a loosely contact surfaces with a relatively low linear stiffness. It is also found that the phase velocity of anti-symmetric wave mode converges to the shear wave velocity in despite of the linear stiffness value if the hysteretic stiffness approaches 0.5.

• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.257-271
• /
• 2011

The analysis of interfacial stresses in structural component has been the subject of several investigations but it still requires more effort and studies. In this study a general three-dimensional interface element has been formulated for stress and displacement analyses in the interfacial area between two adjacent plate bending element and brick element. Interface element has 16 nodes with 5 degrees of freedom (DOF) in each node adjacent to plate bending element and 3 DOF in each node adjacent to brick element. The interface element has ability to transfer three translations from each side of interface element and two rotations in the side adjacent to the plate element. Stiffness matrix of this element was formulated and implemented in three-dimensional finite element code. Application of this element to the reinforced concrete (RC) beam strengthened with fiber reinforced polymer (FRP) including variation of deflection, slip between plate and concrete, normal and shear stresses distributions in FRP plates have been verified using experimental and numerical work of strengthened RC beams carried out by some researchers. The results show that this interface element is effective and can be used for structural component with these types of interface elements.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.193-200
• /
• 2012

Previous publications regarding the design and specifications of the interface inductor and the DC side capacitor for a STATCOM usually deal with the interface inductor and the DC side capacitor only. They seldom pay attention to the influences of the interface inductor and capacitor on the performance of a STATCOM system. In this paper a detailed analysis of influence of the interface inductor and the DC side capacitor on a STATCOM system and the corresponding design considerations is presented. Phase and amplitude control is considered as the control strategy for the STATCOM. First, a model of a STATCOM system is carried out. Second, through frequency domain methods, such as transfer functions and Bode plots, the influence of the interface inductor and the DC side capacitor on the stability and filtering characteristics of the STATCOM are extensively investigated. Third, according to this analysis, the design considerations based on the phase margin for the interface inductor and the DC side capacitor are discussed, which leads to parameters that are different from those of the traditional design.