• 한국정보통신학회논문지
• /
• 제16권8호
• /
• pp.1817-1823
• /
• 2012

네트�p 중심전(NCW) 및 정보화 시대에 발맞추어 군에서도 고성능 작전콘솔을 활용하여 다양하고 복잡한 메시지 교환 및 운용병간 음성통화를 통해 신속하게 상태 및 정보를 공유함으로써 임무수행의 효율을 극대화하는 추세로 발전하고 있다. 작전 또는 훈련종료 후 임무 분석 및 검토를 통해 추후 새로운 작전계획을 세울 목적으로 작전상황을 기록하는 장치가 개발되어 운용되고 있다. 기록장치의 기록방식은 전시영상을 직접 기록하는 방식과 연동되는 데이터를 기록하는 방식으로 나뉜다. 본 연구는 데이터 기반 기록방식의 재생준비시간 개선을 위한 새로운 기록 방식과 개선방안을 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.552-555
• /
• 2004

The reliability issue of the probe tip/recording media interface is one of the most crucial concerns in the Atomic Force Microscope (AFM)-based recording technology. In this work, the tribological characteristics of the probe/media interface were investigated by performing wear tests using an AFM. The ranges of applied normal load and sliding velocity for the wear test were 10 to 50nN and 2 to 20$\mu$m/s respectively. The damage of the probe tip was quantitatively as well as qualitatively characterized by Field Emission Scanning Probe Microscope (FESEM) analysis and calculated based on Archard s wear equation. It was shown that the wear coefficient of the probe tip was in the order of 10$^{-4}$ ~ 10$^{-3}$ , and significant contamination at the end of the probe tip was observed. Thus in order to implement the AFM-based recording technology, tribological optimization of the probe/media interface must be achieved.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.737-740
• /
• 2009

건축물과 같은 구조물들을 3D 가상모델로 구축하게 되면, 그 구조물을 간접적으로 체험할 수 있기 때문에 매우 유용하게 사용될 수 있다. 하지만 현재의 가상현실 기술은 이를 단순히 시각화하여 보여 주는 것에 그치고 있다. 건축물과 같은 구조물은 외형뿐만 아니라 그 구조적 정보도 중요하며, 이러한 구조적 정보는 조립과 해체의 과정을 통해 표현될 수 있다. 따라서 본 연구에서는 3D 객체의 조립 및 해체 과정을 통해 구조적 이해가 가능한 기록 및 재생 인터페이스를 연구하였다.

• 융합신호처리학회논문지
• /
• 제10권4호
• /
• pp.280-288
• /
• 2009

본 논문에서는 한국우주전파관측망(Korean VLBI Network; KVN)을 통하여 천체의 미약한 우주전파를 고속으로 기록하는 Mark5B 고속기록기 시스템의 제어운용 소프트웨어를 분석하고 VSI(VLBI Standard Interface) 형식의 시각정보를 기록할 수 있는 소프트웨어를 개발하였다. 고속기록기 시스템의 제어운용 소프트웨어는 대용량 하드디스크를 제어할 수 있는 RAID 보드를 구동하는 소프트웨어와 네트워크를 통한 제어운용을 할 수 있다. 핵심 제어 소프트웨어가 시스템에서 구동하고 있으면 네트워크로 입력된 명령을 해석하고 실행 후 결과를 다시 네트워크를 통해 출력하도록 구성되어 있다. 이러한 소프트웨어 분석을 통하여 기록된 관측데이터를 상관처리하기 위해 필요한 시각정보를 함께 기록할 수 있는 소프트웨어를 본 논문에서 개발하였다. 개발된 소프트웨어는 데이터를 기록할 때 입력되는 1PPS 신호의 인터럽트를 확인한 후 데이터 기록과 함께 기록시각정보도 함께 데이터 기록시간동안 기록한다. 개발한 소프트웨어의 정상동작을 확인하기 위해 실제 관측을 수행하였으며, 기록한 데이터의 분석을 통하여 그 유효성을 확인하였다.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.34-41
• /
• 2005

We report some recent results in the rewritable Blu-ray Disc with enhanced overwrite cyclability by using the growth dominant eutectic based Ge(Sb70Te30)+Sb recording layer, GeN interface layer and write strategy optimization. We have developed phase-change optical media with appropriate write strategy for 36(i.e., 1X)-72Mbps(i.e., 2X) dual speed Blu-ray Disc system and fur the future high speed optical data storage. For recording layer, eutectic-based Ge(Sb70Te30)+Sb material was used and Sb/Te ratio and Ge content were optimized to obtain proper erasability and archival stability of recorded amorphous marks. The recording layer is wrapped up in GeN interface layers to obtain overwrite cyclability and higher crystallization speed. In addition, we designed appropriate write strategy so called Time-Shifted Multipulse (TSMP) write strategy where starting position of multipulse parts are shined from reference clock. With this write strategy, the jitter characteristics of the disc was improved and we found that leading edge jitter was improved much more than trailing edge jitter in 1X-2X speed recording. Finally, we investigated the higher speed feasibility of 144Mbps(i.e., 4X) by adopting some elemental doping to the eutectic based Ag-In-Sb-Te recording layer and structural optimization of constitution layers in Blu-ray Disc. In the paper, we report the effect of Sn addition for the feasibility of higher speed recording. The addition of Sn shows increases of the crystallization speed of phase change recording layer.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1962-1967
• /
• 2008

A event recorder system stores a train speed and the related information for train operation in real time. Using those information, we can analysis the train operation and the reason of train accident. Currently the event recorder only manipulate the data related the train operation mechanically and electrically. In this paper we propose the event recorder to record the voice communication between the manager in the control center and train operator. By recording the voice communication in the high speed train, the correctness of analysis of train accident can be increased. The system architecture of the event recorder with voice recording is studied and interface between other equipment is proposed. And the software architecture of new event recorder is developed. We study the method of converting analog voice signal into digital data and compressing method. Also the architecture of memory to store the compressed voice data and regeneration of original analog voice are studied.

• 천문학논총
• /
• 제22권3호
• /
• pp.63-73
• /
• 2007

In this paper, we introduce the performance test results of digital data processing system for KVN (Korean VLBI Network). The digital data processing system for KVN consists of DAS (Data Acquisition System) and high-speed recorder which called Mark5B system. DAS system performs the digitalization of analog radio signal through ADS-1000 gigabit sampler with 1 Gsps/2-bit and process the digital filtering of digital signal. Mark5B system records the output data of DFB (Digital Filter Bank) with about 1 Gbps. In this paper, we carried out the preliminary evaluation experiments of the KVN digital data processing system connected between DAS system and Mark5B with VSI (VLBI Standard Interface) interface which is designed for compatible in each VLBI system. We first performed all of the KVN digital data processing system connected by VSI interface in the world. In factory inspection phase, we found that the DAS system has a memory read/write error in DSM (Digital Spectrometer) by analyzing the recorded data in Mark5B system. We confirmed that the DSM memory error has been correctly solved by comparing DSM results with Mark5B results. The effectiveness of KVN digital data processing system has been verified through the preliminary experiments such as data transmission, recording with VSI interface connection and data analysis between DSM and Mark5B system. In future work, we will perform the real astronomical observation by using the KVN 21m radio telescopes so as to verify its stability and performance.

• 항공우주기술
• /
• 제9권2호
• /
• pp.153-160
• /
• 2010

ADRS는 프로그램 가능한 자동화 컨트롤러로써 스마트무인기를 위해 설계된 저비용의 재구성 가능한 비행시험 데이터 수집 시스템이다. 본 논문에서는 하드웨어와 소프트웨어 설계내용을 기술하였다. ADRS와 DFCC 인터페이스, ADRS와 센서 인터페이스에 대한 하드웨어 구성과 수정사항을 기술하였으며 ADRS 운용 소프트웨어와 데이터 저장에 대한 절차가 설명되었다. 마지막으로 스마트무인기의 지상시험과정을 통한 ADRS의 검증과정 및 결과가 제시되었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.303-309
• /
• 1999

Optimum tribological performance of the head/disk system is critical in maintaining reliable data processing in a hard disk drive. Particularly, as the flying height of the slider continues to decrease with increasing recording density, frictional interaction between the slider and the disk need to be better understood. In this work the effect of reduced ambient pressure on the tribological behavior of the head/disk interface is presented. It is found that surface damage of the components can be accelerated by reducing the ambient pressure. This method may be utilized to assess slider/disk compatibility of newly developed systems in short time.

• 한국컴퓨터정보학회논문지
• /
• 제20권7호
• /
• pp.57-64
• /
• 2015

In this paper, we propose a design of microwave motion detector using X-band doppler radar sensor to minimize the power consumption. To minimize the power consumption and implement battery operated system, pulse input with 2 KHz, 4% duty cycle is exerted on the doppler radar sensor. In order to simplify the process of working with ATmega2560 microcontroller unit, Arduino compatible board is designed and implemented. Arduino is open source hardware and many library software is published as open source tools. Smartphone app is also proposed and designed as a real-time user interface of the motion detector. The SQLite database on the Android mobile operating system is used for recording raw data of motion detection for post-processing job, such as fast Fourier transform (FFT). Bluetooth interface module is implemented on the motion detection board as a wireless communication interface to the smartphone. The speed of human movement is identified by post-processing FFT.