• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.512-519
• /
• 2016

In this paper, we compared the user experience according to utilize parallax scrolling technique in web site. For this purpose, we divided subjects into two groups. The subjects of Group1 were given to use web site interface with Parallax scrolling and the Group2 were given to use web site interface with non Parallax scrolling. Then, All Subjects answered the questionnaire of user experience. User experience were evaluated by four entries as Novelty, Esthetics, Usage of Satisfaction, Cheerfulness. Consequently. As a result, the web site interface with Parallax scrolling showed significantly higher score of Novelty, Esthetics, Cheerfulness than the web site interface with non-Parallax scrolling. In this study. we proved that using the parallax scrolling technique in web site interface improves the overall user experience, and suggested to apply as a way to advance the attention and persistency on creating a web site.

• 디지털융복합연구
• /
• 제4권1호
• /
• pp.31-41
• /
• 2006

This article introduces developing trends of an 'Ubiquitous Interface' as an access method for use of various network resources, such as public wireless networks and un-licensed wireless networks in ubiquitous sensor network environments, without troublesome settings or operations by users. 'Ubiquitous Interface' is a relatively wide sense meaning not only physical interface of specified device or between processors, but anything method for access USN. These 'Ubiquitous Interface' able to provide seamless services that adapt autonomously to the user's movements and changes in the state of wireless resources. Recently, strongly recommended current technologies are RFID, NFC, Multi-mode mobile terminal, UMA mobile terminal and Wearable computer as a future ubiquitous interface. These technologies are have to have flexibility and multiple physical communication channels for seamless service hand over and serve easy connection at huge USN to user. Also, they have to must have flexible software structure. Finally, through the 'Ubiquitous Interface', we will be experience of seamless communication and realize a real liberty of communication.

• 산업공학
• /
• 제15권1호
• /
• pp.73-81
• /
• 2002

In mobile phone, complex user interface tend to cause the degradation of product usability. This problem is mainly due to the small hardware user interface of mobile phone. That is, because many functions must be operated in small hardware interface, the principle of one-to-one mapping between a function and a control is disregarded in design, often. In order to resolve this problem, users' characteristics must be considered in the user interface design of mobile phone. So, users' basic characteristics that must be considered in the user interface design of mobile phone were studied through two experiments, questionnaire survey and user testing.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1044-1051
• /
• 2004

This paper described a novel locomotion interface that can generate infinite floor for various surface, named as virtual walking machine. This interface allows users to participate in a life-like walking experience in virtual environments, which include various terrains such as plains, slopes and stair ground surfaces. The interface is composed of two three-DOF (X, Y, Yaw) planar devices and two four-DOF (Pitch, Roll, Z, and relative rotation) footpads. The planar devices are driven by AC servomotors for generating fast motions, while the footpad devices are driven by pneumatic actuators for continuous support of human weight. To simulate natural human walking, the locomotion interface design specification are acquired based on gait analysis and each mechanism is optimally designed and manufactured to satisfy the given requirements. The designed locomotion interface allows natural walking(step: 0.8m, height: 20cm, load capability: 100kg, slope:30deg) for various terrains.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.855-858
• /
• 2003

TCP/IP 를 포함하는 데이터 네트워킹 프로토콜을 구현함에 있어, 기존에는 소프트웨어 방식으로 구현되었던 모듈들을 하드웨어로 구현하는 프로젝트를 수행하면서, CPU 와 하드웨어 모듈과의 통신을 중계하는 모듈을 구현하였다. 본 논문에서는 TCP/IP 하드웨어와 CPU 와의 통신을 위한 Host Interface 의 기능에 대해 다루고 구현 방식을 Control flow와 Data flow의 입장에서 설명하였다. 우선, Host Interface 의 기능을 설명하고 Host Interface 의 입출력 신호를 정의하였다. Host Interface에서 이루어지는 CPU와 하드웨어 모듈간의 통신을 제어정보 흐름과 데이터정보 흐름으로 나누고 제어흐름을 위해서는 Command/Status Register 를 두었고, 데이터 흐름을 위해서는 CPU와 데이터 RAM 사이에 FIFO 를 두어 데이터의 흐름이 신속히 이루어지도록 하였다. 끝으로 Host Interface 와 주변 모듈들간의 통신에 대한 Testcases에 대해서도 다루었다.

• ETRI Journal
• /
• 제18권4호
• /
• pp.229-244
• /
• 1997

Realization of the economical, reliable, and efficient ATM interface block becomes an important key to development of the ATM switching system when we consider new issues raised recently. In this paper, we summarize requirements for the ATM interface block and present the UNI (User Network Interface)/NNI (Network Node Interface) architecture to meet these requirements. We also evaluate the performance of the multiplexer adopting the various multiplexing schemes and service disciplines. For ATM UNI/NNI interface technologies, we have developed a new policing device using the priority encoding scheme. It can reduce the decision time for policing significantly. We have also designed a new spacer that can space out the clumped cell stream almost perfectly. This algorithm guarantees more than 99 % conformance to the negotiated peak cell rate. Finally, we propose the interface architecture for accommodation of the ABR (Available Bit Rate) transfer capability. The proposed structure that performs virtual source and virtual destination functions as well as a switch algorithm can efficiently accommodate the ABR service.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.172-179
• /
• 2001

The effects of the interface and two holes located near the crack path in the hybrid specimen on the dynamic crack propagation behavior have been investigated using dynamic photoelasticity with the aid of Cranz-Shardin type high speed camera system. The dynamic stress field around the dynamically propagating interface crack tip in the three point bending specimens under a dynamic load applied by a hammer dropped from 0.6m high without initial velocity are recorded. The complex stress intensity factors for the dynamically propagating interface crack are extracted by using a overdeterministic least square method. Theoretical dynamic interface isochromatic fringe loops generated by using the numerically determined complex stress intensity factors are compared with the experimental results. Furthermore, the influence of the hole to the dynamic interface crack velocities has been investigated experimentally.

• 디지털산업정보학회논문지
• /
• 제8권1호
• /
• pp.183-190
• /
• 2012

Mobile web applications are different from desktop web applications because of their small screen size and small user input devices. Therefore user interface designers have spent their effort and time to re-design the user interface of mobile web applications to meet these differences. In this paper, we introduce five user interface patterns for mobile web applications to reduce their effort and time. Two of them are for utilizing small screen size efficiently, and they are space overloading pattern and data filtering pattern. These patterns enable designers to reduce screen usage. The other three patterns - data suggestion pattern, input reuse pattern, and incremental data input pattern - are for helping users' data input on mobile devices. These three patterns enable users to reduce direct data input. Our work will help user interface designers develop mobile web interface to utilize screen space efficiently and get data with less errors and less efforts from users.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.859-864
• /
• 2003

In these days, the deterioration of bridges make it necessary for decks to be replaced and it is inevitable to apply the precast decks to minimize the traffic control induced from the deck placement. This precast deck construction makes the physically discontinuous interface between old and new concrete. Usually, the adhesive force at this interface are ignored. However, for crack behavior and reliable long term behavior, it is required to evaluate the exact value of the cohesive force at the interface. This research investigates the cohesive characteristics at the interface. Four different interface surface conditions are tested and three different methods are used to measure the cohesive strength at the interface. In addition, cohesive characteristic at the surface between precast panels are investigated with different interface surface conditions.

• 산업기술연구
• /
• 제15권
• /
• pp.83-91
• /
• 1995

This paper presents the design of a smart A/D conversion interface used for measuring the load of a truck. Since the load-cell sensor to be used is very sensitive for weight variation, the interface board must have the low-drift and the A/D conversion for accuracy. A new integrator and comparator has been developed to reduce the offset voltage and the drift current of operational amplifiers and has been adapted into the interface board. Also, a software algorithm has been developed to obtain the stable and accrurate A/D conversion. This software includes a RS-485 communication program to control the interface, which gives a capability of backing-up the calibration data and transferring control data. The test and evaluation of the designed interface has been shown as having the better performance compared to the other types of existing weighing systems and sensor instruments.