• 한국융합학회논문지
• /
• 제11권8호
• /
• pp.15-22
• /
• 2020

재난예방단계와 사회재난분야의 관리강화를 위해 지능정보기술(ICBMA, IoT, Cloud, Big Data, Mobile, AI) 활용하여 상호 연계한 To-Be 재난관리시스템 제안을 고찰하고자 한다. 민간Moble, IoT등에서 생성되는 재난발생 전후시기에 재난징후의 Big Data와 분석 결과로 초지능 인프라를 구축함으로써 현재 재난관리 시스템을 고도화할 수가 있다. 재난징후의 Big Data를 AI의 지도, 비지도 강화훈련 학습으로 사용자에게 적시에 맞춤식 제공이 가능하고 장기적으로 재난대처 능력이 향상될 뿐 만 아니라 예방단계 중심의 관리 능력이 높아질 것으로 예상된다.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2256-2261
• /
• 2015

In the power plant using high temperature fuel cells such as Molten Carbonate Fuel Cell(MCFC), and Solid Oxide Fuel Cell(SOFC), the generated electric power per area of power generation facilities is much higher than any other renewable energy sources. - High temperature fuel cell systems are capable of operating at MW rated power output. - It also has a feature that is short for length of the line for connecting the interior of the generation facilities. In normal condition, these points are advantages for voltage drops or power losses. However, in abnormal condition such as fault occurrence in electrical system, the fault currents are increased, because of the small impedance of the short length of power cable. Commonly, to minimize the thermal-mechanical stresses on the stack and increase the systems reliability, we divided the power plant configuration to several banks for parallel operation. However, when a fault occurs in the parallel operation system of power main transformer, the fault currents might exceed the interruption capacity of protective devices. In fact, although the internal voltage level of the fuel cell power plant is the voltage level of distribution systems, we should install the circuit breakers for transmission systems due to fault current. To resolve these problems, the SFCL has been studied as one of the noticeable devices. Therefore, we analyzed the effect of application of the SFCL on bus tie in a fuel cell power plants system using PSCAD/EMTDC.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.512-516
• /
• 2012

Recently the Korean government's green energy growth policy has been taken at the national level due to the sufficient supply of renewable energy. Some specific technique should be taken in consideration for the operation of the grid voltage and power quality management. In this case, there may have some chance of operational problems. Typical problems arise when grid-connected solar power produced by Pacific sunshine. The power flow in the reverse direction can create overvoltage on the distribution line and gives value of malfunction on the system. Line voltage and overvoltage adjustment practice can stop these symptoms occurred. Under these circumstances, this paper presents an interconnection test devices for photovoltaic(PV) systems composed of distribution system simulator, PV system simulator and control and monitoring systems using the LabVIEW S/W, and simulates the customer voltage characteristics considering the 3 parameters on the introduction capacity for PV systems, system configuration and Power factor. This paper also proposes a new calculation algorithm for voltage profile to make comparison between calculation values and test device values. The results show that the simulation results for the normal operation characteristics of PV systems which are very practical and effective.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.9-16
• /
• 2005

This paper presents the development of new anisotropic conductive adhesives with enhanced thermal conductivity for the wide use of adhesive flip chip technology with improved reliability under high current density condition. The continuing downscaling of structural profiles and increase in inter-connection density in flip chip packaging using ACAs has given rise to reliability problem under high current density. In detail, as the bump size is reduced, the current density through bump is also increased. This increased current density also causes new failure mechanism such as interface degradation due to inter-metallic compound formation and adhesive swelling due to high current stressing, especially in high current density interconnection, in which high junction temperature enhances such failure mechanism. Therefore, it is necessary for the ACA to become thermal transfer medium to improve the lifetime of ACA flip chip joint under high current stressing condition. We developed thermally conductive ACA of 0.63 W/m$\cdot$K thermal conductivity using the formulation incorporating $5 {\mu}m$ Ni and $0.2{\mu}m$ SiC-filled epoxy-bated binder system to achieve acceptable viscosity, curing property, and other thermo-mechanical properties such as low CTE and high modulus. The current carrying capability of ACA flip chip joints was improved up to 6.7 A by use of thermally conductive ACA compared to conventional ACA. Electrical reliability of thermally conductive ACA flip chip joint under current stressing condition was also improved showing stable electrical conductivity of flip chip joints. The high current carrying capability and improved electrical reliability of thermally conductive ACA flip chip joint under current stressing test is mainly due to the effective heat dissipation by thermally conductive adhesive around Au stud bumps/ACA/PCB pads structure.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.469-473
• /
• 2009

We present high-voltage liquid-electrolyte microbatteries, inspired from the high-voltage generation mechanism of electric eels using serially connected multiple-cell arrays. In the microbatteries, we purge air into the electrolyte filled in a channel layer to isolate serially connected multiple cell arrays using three surface-tension valves (cell-front, outlet, and cell-end valves). Compared to the previous multi-cell stack or interconnection, present microbatteries provide a reduced multi-cell charging time. We have designed and characterized four different prototypes C1, C10, C20, and C40 having 1, 10, 20, and 40 cells, respectively. In the experimental study, the threshold pressures of cell-front, outlet, and cell-end valves were measured as $460{\pm}47$, $1,000{\pm}53$, and $2,800{\pm}170$ Pa, respectively. The average charging time for C40 was measured as $26.8{\pm}4.9$ seconds where the electrolyte and air flow-rates are 100 and $10{\mu}l/min$, respectively. Microbatteries showed the maximum voltage of 12 V (C40), the maximum power density of $110{\mu}W/cm^2$ (C40), and the maximum power capacity of $2.1{\mu}Ah/cm^2$ (C40). We also proposed a tapered-channel to remove the reaction gas from the cell chamber using a surface tension effect. The present microbatteries are applicable to high-voltage portable power devices.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.1-9
• /
• 2021

With the convergence of the information and communication technologies, a new age of technological civilization has arrived. This is the age of intelligent revolution, known as the 4th industrial revolution. The 4th industrial revolution is based on technological innovations, such as robots, big data analysis, artificial intelligence, and unmanned transportation facilities. This revolution would interconnect all the people, things, and economy, and hence will lead to the expansion of the industry. A high-density, high-capacity energy technology is required to maintain this interconnection. As a next-generation energy source, lithium-ion batteries are in the spotlight today. However, lithium-ion batteries can cause thermal runaway and fire because of electrical, thermal, and mechanical abuse. In this study, thermal runaway was induced in 72.5 Ah NCM pouch-type lithium-ion batteries because of thermal abuse. The surface of the pouch-type lithium-ion batteries was heated by the hot plate heating method, and the effect of the rate of increase in the surface temperature on the thermal runaway trigger time was analyzed using Minitab 19, a statistical analysis program. The correlation analysis results confirmed that there existed a strong negative relationship between each variable, while the regression analysis demonstrated that the thermal runaway trigger time of lithium-ion batteries can be predicted from the rate of increase in their surface temperature.

• Steel and Composite Structures
• /
• 제46권2호
• /
• pp.175-193
• /
• 2023

Stainless steel-concrete composite beam has become an attractive structural form for offshore bridges and iconic high-rise buildings, owing to the superior corrosion resistance and excellent ductility of stainless steel material. In a composite beam, stainless steel shear connectors play an important role by establishing the interconnection between stainless steel beam and concrete slab. To enable the best use of high strength stainless steel shear connectors in composite beams, high strength concrete is recommended. To date, the application of stainless steel shear connectors in composite beams is still very limited due to the lack of research and proper design recommendations. In this paper, a total of seven pushout specimens were tested to investigate the load-slip behaviour of stainless steel shear connectors. A thorough discussion has been made on the differences between stainless steel bolted connectors and welded studs, in terms of the failure modes, load-slip behaviour and ultimate shear resistance. In parallel with the experimental programme, a finite element model was developed in ABAQUS to simulate the behaviour of stainless steel shear connectors, with which the effects of shear connector strength, concrete strength and embedded connector height to diameter ratio (h/d) were evaluated. The obtained experimental and numerical results were analysed and compared with existing codes of practice, including AS/NZS 2327, EN 1994-1-1 and ANSI/AISC 360-16. The comparison results indicated that the current codes need to be improved for the design of high strength stainless steel shear connectors. On this basis, modified design approaches were proposed to predict the shear capacity of stainless steel bolted connectors and welded studs in the composite beams.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.45-54
• /
• 2020

최근 PCB의 소형화, 박형화 및 고밀도화가 크게 요구되면서 MSAP (Modified Semi Additive Process) 기술을 이용한 SLP (Substrate Like PCB) 기술이 큰 주목을 받고 있다. 특히 SLP 기술은 스마트폰의 고용량 배터리 개발과 5G 기술에 꼭 필요한 기술이다. 본 연구에서는 기존의 HDI 기술과 MSAP 기술을 혼합하여 제작한 하이브리드 방식의 SLP의 신뢰성을 실험과 수치해석을 이용하여 분석하였다. 특히 최적의 SLP 설계를 위하여 프리프레그(prepreg)의 물성, 두께, 층수, 마이크로비아(microvia)의 크기 및 misalignment가 마이크로비아의 신뢰성에 미치는 영향을 IST(Interconnect Stress Test) 시험을 이용한 열사이클링 신뢰성 실험과 유한요소 수치해석을 통하여 고찰하였다. SLP 소재인 프리프레그의 열팽창계수가 적을수록 마이크로비아의 신뢰성은 크게 증가하며, 프리프레그의 두께가 얇을수록 신뢰성이 증가된다. 마이크로비아 홀의 크기 및 패드의 크기가 증가하면 응력이 완화되어 신뢰성은 향상된다. 반면 프리프레그의 층수가 증가할수록 마이크로비아의 신뢰성은 감소된다. 또한 misalignment가 크면 신뢰성은 감소하였다. 특히 이들 인자들 중에서 프리프레그의 열팽창계수가 마이크로비아의 신뢰성에 가장 큰 영향을 미친다. 수치 응력해석 결과도 실험 결과와 잘 일치하였으며, 응력이 낮을수록 마이크로비아의 신뢰성은 증가하였다. 본 실험과 수치해석의 결과는 향후 SLP 기판 제작 및 신뢰성 향상을 위한 유용한 설계 가이드라인으로 활용될 것으로 판단된다.

• 농촌의학ㆍ지역보건
• /
• 제32권3호
• /
• pp.139-153
• /
• 2007

Injury in agriculture is a serious public health issue with a major impact on the lives of Korean farmers. It is one of the leading causes of death and is also a major cause of longand short-term disability. In 2001, the social cost of one accident in agricultural machinery was estimated as 97.7-97.8 million won that is 4 fold of farm household income in Korea. Effective prevention and control of injuries requires a system of surveillance that monitors the incidence of injuries, their causes, treatment and outcomes. This requires an integrated system of data collection, analysis and interpretation and communication. Creating effective injury surveillance system in Korea requires to establish a framework for a national agenda. Discussions regarding the development of the framework should address, but not be limited to issues related to Data Holdings and Linkages; Capacity and Skills; Communication; Interconnection; and Surveillance Products. Ideally, an injury surveillance system would meet the information requirements across all sectors, while allowing each to have the ongoing information it needs for its policy and programming needs. This study was carried out to develop a surveillance system of agricultural injuries in Korea. Study subjects were residents who lived in a typical agricultural area (Yangpyung area in Kyung-gi province). The main data sources were reports of village headmen, compared with data of 'National Emergency Management Agency', 'National Health Insurance Corporation', 'Insurance of National Agricultural Cooperative', and 'Emergency Medical Centers'. Each data were reviewed to validate the strengths and weaknesses.