• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.579-585
• /
• 2017

Powder method is one of the most commonly used techniques for developing latent fingerprints on non-porous surfaces. While fingerprint powders become more diverse, there is no standard for the number of stroking a brush. For this reason, crime scene investigators need to stroke a brush as they try to figure out how much latent fingerprints are developed. Also, results vary from individual to individual. According to the combination of material and manufacturing, there are various results that powder particles hold together. It is called auto-adhesion which means the interaction between powder particles. This study showed auto-adhesion of 13 kinds of fingerprint powders expanding the number of stroking time. Consequently, some fingerprint powders had strong auto-adhesive property and others had weak auto-adhesion. Furthermore, the others did not change.

• Quality Improvement in Health Care
• /
• v.10 no.2
• /
• pp.216-231
• /
• 2003

Objectives: To develop a model that predicts a death probability of acute myocardial infarction(AMI) patient, and to evaluate a performance of hospital services using the developed model. Methods: Medical records of 861 AMI patients in 7 general hospitals during 1996 and 1997 were reviewed by two trained nurses. Variables studied were risk factors which were measured in terms of severity measures. A risk model was developed by using the logistic regression, and its performance was evaluated using cross-validation and bootstrap techniques. The statistical prediction capability of the model was assessed by using c-statistic, $R^2$ as well as Hosmer-Lemeshow statistic. The model performance was also evaluated using severity-adjusted mortalities of hospitals. Results: Variables included in the model building are age, sex, ejection fraction, systolic BP, congestive heart failure at admission, cardiac arrest, EKG ischemia, arrhythmia, left anterior descending artery occlusion, verbal response within 48 hours after admission, acute neurological change within 48 hours after admission, and 3 interaction terms. The c statistics and $R^2$ were 0.887 and 0.2676. The Hosmer-Lemeshow statistic was 6.3355 (p-value=0.6067). Among 7 hospitals evaluated by the model, two hospitals showed significantly higher mortality rates, while other two hospitals had significantly lower mortality rates, than the average mortality rate of all hospitals. The remaining hospitals did not show any significant difference. Conclusion: The comparison of the qualities of hospital service using risk-adjusted mortality rates indicated significant difference among them. We therefore conclude that risk-adjusted mortality rate of AMI patients can be used as an indicator for evaluating hospital performance in Korea.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.56-61
• /
• 2003

This is a review article about range of motion, stretching, and aerobic exercise in accelerated rehabilitation of knee and shoulder. If the joint was immobilized for a long time after injury, it would cause stiffness and atrophy. Therefore, this program includes various exercise techniques; range of motion for joint stiffness, and stretching for muscle relaxation, and cardiovascular training (e.g., swimming, upper body extremity, stationary bicycle) for prevention of cardiopulmonary function decrease. In accelerated rehabilitation, It is very important factor to make interaction between clinical exercise specialist and patients. Also, we recommend that they should discuss with sports medicine doctor as a team members the following; pain, adaptation of exercise, fitness level, and progression of program.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1623-1628
• /
• 2015

As the performance of mobile devices has increased, high-end multicore CPUs have become the norm in smartphones. However, such high performance devices are exposed to the problem of battery depletion due to the energy consumption caused by software performance, and despite increases in battery capacity. The required resources are dynamic and varied, and further user interaction is highly random; thus, Linux-based power management such as DVFS is needed to fulfill requirements. In order to reduce power consumption, we propose a method to restrict the CPU frequency of data download while maintaining user reactivity. This can supplement the weakness of existing Linux-based power management techniques like DVFS in relation to webpage loading. Through the implementation of our method at the application level, we confirm that energy consumption from webpage loading is reduced.

• Nuclear Engineering and Technology
• /
• v.2 no.3
• /
• pp.163-178
• /
• 1970

Deformation modes at room temperature and the interaction between slip lines and ${\gamma}$' precipitate particles in heat treated Rene 41 were studied by means of replica techniques in an electron microscope. The alloy had been deformed by compression after aging for times up to 9300 hr at 76$0^{\circ}C$ and 87$0^{\circ}C$. The slip structure observed was similar to that of o brass, i.e., consisting of single slip lines occurred on the｛111｝<110> system. The slip structure was also correlated with aging conditions. Slip lines appeared to pass through ${\gamma}$' particles, shearing them with the matrix even after a prolonged heat treatment. It was concluded on the basis of comparison with previously published data that ${\gamma}$' particles remain at least partially coherent with the matrix even in a greatly overaged condition.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2013

This paper presents the results of experimental and numerical research on the slamming phenomenon. Two experimental techniques were proposed in this study. The traditional free drop tests were carried out. However, the free drop tests done in this study using an LM guide showed excellent repeatability, unlike those of other researchers. The coefficients of variation for the drop test done in this experiment were less than 0.1. The other experimental technique proposed in this study was a novel concept that used a pneumatic cylinder. The pneumatic cylinder could accelerate the specimen over a very short distance from the free surface. As a result, high rates of repeatability were achieved. In the numerical study, the development of in-house code and utilization of commercial code were carried out. The in-house code developed was based on the boundary element method. It is a potential code. This was mostly applied to the computation of the wedge entry problem. The commercial code utilized was FLUENT. Most of the previous slamming research was done under the assumption of a constant body velocity all through the impact process, which is not realistic at all. However, the interaction of a fluid and body were taken into account by employing a user-defined function in this study. The experimental and numerical results were compared. The in-house code based on BEM showed better agreement than that of the FLUENT computation when it cames to the wedge computation. However, the FLUENT proved that it could deal with a very complex geometry while BEM could not. The proposed experimental and numerical procedures were shown to be very promising tools for dealing with slamming problems.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.734-745
• /
• 2016

This review article described the electrochemical Frumkin, Langmuir, and Temkin adsorption isotherms of over-potentially deposited hydrogen (OPD H) and deuterium (OPD D) for the cathodic $H_2$ and $D_2$ evolution reactions (HER, DER) at Pt, Ir, Pt-Ir alloy, Pd, Au, and Re/normal ($H_2O$) and heavy water ($D_2O$) solution interfaces. The Frumkin, Langmuir, and Temkin adsorption isotherms of intermediates (OPD H, OPD D, etc.) for sequential reactions (HER, DER, etc.) at electrode/solution interfaces are determined using the phase-shift method and correlation constants, which have been suggested and developed by Chun et al. The basic procedure of the phase-shift method, the Frumkin, Langmuir, and Temkin adsorption isotherms of OPD H and OPD D and related electrode kinetic and thermodynamic parameters, i.e., the fractional surface coverage ($0{\leq}{\theta}{\leq}1$) vs. potential (E) behavior (${\theta}$ vs. E), equilibrium constant (K), interaction parameter (g), standard Gibbs energy (${\Delta}G_{\theta}{^{\circ}}$) of adsorption, and rate (r) of change of ${\Delta}G_{\theta}{^{\circ}}$ with ${\theta}$ ($0{\leq}{\theta}{\leq}1$), at the interfaces are briefly interpreted and summarized. The phase-shift method and correlation constants are useful and effective techniques to determine the Frumkin, Langmuir, and Temkin adsorption isotherms and related electrode kinetic and thermodynamic parameters (${\theta}$ vs. E, K, g, ${\Delta}G_{\theta}{^{\circ}}$, r) at electrode/solution interfaces.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.78-85
• /
• 2016

While most AUV researches have concerned about single hydrofoil, practical AUV's are generally operated with multiple hydrofoils. Double hydrofoil study attempts to evaluate thrust and efficiency with various flapping motions, and carries out design optimization using parametric analysis. Flow patterns such as vortex shedding and wake-body interaction are carefully investigated during design variable sensitivity analysis. The purpose of this design optimization is to find out the optimal motion that yields maximum thrust and efficiency. The design optimization employes several techniques such as table of orthogonal arrays, Kriging method, ANOVA analysis and MGA. Throughout this research, it is possible to find the optimal values of heaving ratio, heaving shift and pitch shift: Heaving ratio 0.950, heaving shift $23.120^{\circ}$ and pitch shift $89.991^{\circ}$ are found to be optimal values in double hydrofoil motions. Thrust and efficiency are 16.7% and 35.1% higher than existing AUV that did not consider nonlinear dependency of motion parameters. This results may offer an effective framework that is applicable to various AUV motion analyses and designs.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.677-684
• /
• 2014

The purpose of this study, due to recent increase of digital outdoor media, is to analyze the consumer experience of interaction with digital media. Through this study it was found that experience factor consisting of cognitive, emotional, and interactional factors has a mediating effect on brand preference and brand reliability which in turn influence consumers' purchasing intention. On the other hand, it was verified that the consumer satisfaction of the experience does not directly influence purchasing intention, but only through the mediation of brand reliability. This research has implications on the academic field as well as in work-level practices, as a study based on an actual operating digital media, not a laboratory simulation that verifies the importance of digital media experience in forming brand equity through immediate influence on brand preference and brand reliability.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.431-439
• /
• 2015

One of common challenges in designing modern production machines is realizing high speed motion without sacrificing accuracy. To address this challenge it is necessary to maximize the stiffness of the mechanical structure and the control system with consideration on the main disturbance input, cutting forces. This paper presents analysis technologies for realizing high stiffness in production machines. First, CAE analysis techniques to evaluate the dynamic stiffness of a machine structure and a new method to construct the physical machine model for servo controller simulations are demonstrated. Second, cutting forces generated in milling processes are analyzed to evaluate their effects on the mechatronics system. In the effort to investigate the interaction among the structure, controller, and process, a flexible multi-body dynamics simulation method is implemented on a magnetic bearing stage as an example. The presented technologies can provide better understandings on the mechatronics system and help realizing high stiffness production machines.