• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.256-266
• /
• 1999

The angled crack which is the simplest and representative case in the mixed mode crack analysis has stimulated the interests of many investigators during past 20 years. In this study the conventional quadratic isoparametric elements were used in all regions except the crack tip zone where triangular singularity elements with 6 nodes were used. The stress intensity factor of K1 and KII were determined respectively by the displacement correlation method. The finite element analysis program in this paper based on maximum energy release rate criteria and the results obtaiend by this program were compared with those calculated from the maximum circumferential tensile criteria and those by Jenq and Shah's experiments of the same geometry and material properties

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.529-534
• /
• 1998

To find out an adequate failure criterion in two-dimensional linear elastic crack problems, finite element programs, SED, which determine stress intensity factors $K_I, K_{II}$, crack angle and peak load by the minimum strain energy density failure criterion were developed. In this program, the conventional quadratic isoparametric elements were used in all regions except the crack tip zone where triangular singular elements with 6 nodes were used. The results of SED were compared with the results of those which followed by the maximum circumferential tensile stress criteria and those by the maximum energy release rate criteria and those by Jenq and Shah`s experiments of the same geometry and material properties. The maximum energy release rate criteria were better close to those of the Jenq and Shah`s experiments than the maximum circumferential tensile stress criteria and the minimum strain energy density criteria.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.195-202
• /
• 2016

In this paper, crack detection method using eigen value analysis is presented. Three methods are used: theoretical analysis, finite element method with the cracked beam elements and finite element method with three dimensional continuum elements. Finite element formulation of the cracked beam element is introduced. Additional term about stress intensity factor based on fracture mechanics theory is added to flexibility matrix of original beam to model the crack. As using calculated stiffness matrix of cracked beam element and mass matrix, natural frequencies are calculated by eigen value analysis. In the case of using continuum elements, the natural frequencies could be calculated by using EDISON CASAD solver. Several cases of crack are simulated to obtain natural frequencies corresponding the crack. The surface of natural frequency is plotted as changing with crack location and depth. Inverse analysis method is used to find crack location and depth from the natural frequencies of experimental data, which are referred by another papers. Predicted results are similar with the true crack location and depth.

• Smart Structures and Systems
• /
• v.16 no.6
• /
• pp.1107-1132
• /
• 2015

A damage detection algorithm based on neuro fuzzy hybrid system is presented in this study for location and severity predictions of cracks in beam-like structures. A combination of eigenfrequencies and rotation deviation curves are utilized as input to the soft computing technique. Both single and multiple damage cases are considered. Theoretical expressions leading to modal properties of damaged beam elements are provided. The beam formulation is based on Euler-Bernoulli theory. The cracked section of beam is simulated employing discrete spring model whose compliance is computed from stress intensity factors of fracture mechanics. A hybrid neuro fuzzy technique is utilized to solve the inverse problem of crack identification. Two different neuro fuzzy systems including grid partitioning (GP) and subtractive clustering (SC) are investigated for the highlighted problem. Several error metrics are utilized for evaluating the accuracy of the hybrid algorithms. The study is the first in terms of 1) using the two models of neuro fuzzy systems in crack detection and 2) considering multiple damages in beam elements employing the fused neuro fuzzy procedures. At the end of the study, the developed hybrid models are tested by utilizing the noise-contaminated data. Considering the robustness of the models, they can be employed as damage identification algorithms in health monitoring of beam-like structures.

• Journal of the Optical Society of Korea
• /
• v.8 no.1
• /
• pp.21-28
• /
• 2004

When femtosecond laser pulses are focused inside the bulk of transparent materials, the intensity in the focal volume becomes high enough to produce permanent structural modifications. This technique has been applied to fabricate three-dimensional photonic structures such as optical memory, waveguides, gratings, and couplers inside a wide variety of transparent materials. In this paper, we review the fabrication of optical elements in glasses with femtosecond laser pulses, including the fabrication of waveguides, couplers, Bragg gratings, zone plates, holographic memory, and micro holes.

• Advances in aircraft and spacecraft science
• /
• v.9 no.6
• /
• pp.493-506
• /
• 2022

The study presents the results of the research of heat and heat exchange processes on the heat-stressed elements of the structure of an advanced TsAGI descent vehicle. The studies were carried out using a mathematical model based on solving discrete analogs of continuum mechanics equations. Conclusions were drawn about the correctness of the model and the dependence of the intensity of heat and mass transfer processes on the most heat-stressed sections of the apparatus surface on its geometry and the catalytic activity of the surface.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.288-295
• /
• 2000

As the level of earthquake intensity in Korea is considered to be moderate, some structures or structural elements may be subjected to the reduced ductility demand, in contrast to the structures in high seismicity, due to the large inherent strength induced by gravity loads. New Zealand Standard(NZS) deals with these structures within the category of structures of limited ductility. This paper briefly reviews the concept of structures of limited ductility in NZS, and its applicability to Korean case. A structural wall system which is used as the structural system for typical apartments is taken as an example for the illustration.

• Toxicological Research
• /
• v.22 no.1
• /
• pp.15-22
• /
• 2006

Many of endocrine disrupting chemicals induce effects via interaction with hormone receptors and responsive elements in target cells. We investigated endocrine disrupting effects of some food additives and contaminants including BHA, BHT, ethoxyquin, propionic acid, sorbic acid, benzoic acid, CPM, aflatoxin B1, cadmium chloride, genistein, TCDD and PCBs in yeast transformants expressing human steroid hormone receptors along with steroid responsive elements. The response limit of genetically recombinant yeast to $17{\beta}$-estradiol, testosterone and progesterone was $1{\times}10^{-16},\;1{\times}10^{-12}\;and\;1{\times}10^{-13}M$, respectively. BHT induced weak transcriptional activity in estrogen sensitive yeast, while BHA and sorbic acid interacted weakly with androgen receptor/responsive element. CPM induced transcriptional activities in all types of yeasts sensitive to steroid hormones. Zearalenone and genistein induced high transcriptional activation in estrogen sensitive yeast with relative potencies almost $10^8$ folds lower than $17{\beta}$-estradiol. TCDD induced transcriptional activation weakly in estrogen- and progesterone- sensitive yeasts. This study elucidated that recombinant yeast is a sensitive and high-throughput system and can be used for the direct assessment on chemical interactions with steroid receptors and responsive elements. Also, the present study raises the requirement of evaluation on the endocrine disrupting effects of BHT, BHA, sorbic acid, CPM and TCDD for their transcription activity in yeast screening system though weak in intensity.

• Computers and Concrete
• /
• v.16 no.6
• /
• pp.881-896
• /
• 2015

A simultaneous analytical, experimental and numerical analysis of crack initiation, propagation and breaking process of the Central Straight through Crack Brazilian Disk (CSCBD) specimens under diametrical compression is carried out. Brazilian disc tests are being accomplished to evaluate the fracturing process based on stress intensity factors (SIFs). The effects of crack inclination angle and crack length on the fracturing processes have been investigated. The same experimental specimens have been numerically modeled by a higher order indirect boundary element method (HDDM). These numerical results are compared with the existing experimental results proving the accuracy and validity of the proposed numerical method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.352.2-352
• /
• 2002

In this paper, Power Flow Analysis (PFA) method has been applied to the prediction of vibration energy density and intensity of coupled shell structures in the medium-to-high frequency ranges. To consider the wave transformation at joint between shell elements, power transmission and reflection coefficients are investigated for various joint angles, and here Donnell-Mushtari thin shell theory has been used. (omitted)