• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.338-345
• /
• 2011

The swirl flow applied for high efficiency and reduction of emission such as NOx, CO in a gas turbine engine makes recirculation zone by shear layer in the combustion chamber. This recirculation zone influences a decreasing flame temperature and flame length by burned gas recirculation. Also it is able to suppress from instability in lean-premixed flame. In this study, it was found that the swirl flow field was characterized as function of swirl number using PIV measurement in dump combustor. As increasing swirl number, a change of flow field was presented and recirculation zone was shifted in the nozzle exit direction. Also turbulent intensity and turbulent length scale in combustor were decreased in combustion. It has shown reduction of eddies scale with swirl number increasing.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.372-379
• /
• 2017

The transport of lysosomal enzymes into the lysosomes depends on the phosphorylation of their chains and the binding of the phosphorylated residues to mannose-6-phosphate receptors. The efficiency of separation depends more on the phosphodiesterases (PDEs) than on the activity of the phosphorylation of mannose residues and can be determined in vitro. PDEs play important roles in regulation of the activation of lysosomes. The expression of proteins was confirmed by western blotting. All PDE4 series protein expression was reduced in high concentrations of rolipram. As a result of observing the fluorescence intensity after rolipram treatment, the lysosomal enzyme was activated at low concentrations and suppressed at high concentrations. High concentrations of rolipram recovered the original function. Antimicrobial activity was not shown in either 10 or $100{\mu}M$ concentrations of rolipram in treated HeLa cells in vitro. However, the higher anticancer activity at lower rolipram concentration was shown in lysosomal enzyme treated with $10{\mu}M$ of rolipram. The anticancer activity was confirmed through cathepsin B and D assay. Tranfection allowed examination of the relationship between PDE4 and lysosomal activity in more detail. Protein expression was confirmed to be reduced. Fluorescence intensity showed decreased activity of lysosomes and ROS in cells transfected with the antisense sequences of PDE4 A, B, C, and D. PDE4A showed anticancer activity, whereas lysosome from cells transfected with the antisense sequences of PDE4 B, C, and D had decreased anticancer activity. These results showed the PDE4 A, B, C, and D are conjunctly related with lysosomal activity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.457-465
• /
• 2009

This study presents a moving least squares (MLS) finite difference method for solving elastic crack problems with stress singularity at the crack tip. Near-tip functions are intrinsically employed in the MLS approximation to model near-tip field inducing singularity in stress field. employment of the functions does not lose the merit of the MLS Taylor polynomial approximation which approximates the derivatives of a function without actual differentiating process. In the formulation of crack problem, computational efficiency is considerably improved by taking the strong formulation instead of weak formulation involving time consuming numerical quadrature Difference equations are constructed on the nodes distributed in computational domain. Numerical experiments for crack problems show that the intrinsically enriched MLS finite difference method can sharply capture the singular behavior of near-tip stress and accurately evaluate stress intensity factors.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.371-382
• /
• 2019

The aim of this study was to evaluate the physiological responses following acute and chronic Nurida-ball exercise to measure the relative exercise intensity and health-related fitness in middle-aged men. In study 1, eight middle-aged men carried out acute Nurida-ball exercise for 30 min. The physiological responses were normalized and compared with a graded treadmill exercise test (GXT) to evaluate the relative exercise intensity. In study 2, twelve middle-aged men were divided into two groups: Nurida-ball exercise group (NB, n=6) and control group (CON, n=6). NB group performed the Nurida-ball exercise for 8 weeks (30min/day, 3 days/week). And then, we measured the body composition, cardiovascular factors, blood lipid factors, and muscle damage markers to confirm the exercise efficiency. In study 1, the related exercise intensity of acute Nurida-ball is the range of GXT-HRpeak (55~85%) and $GXT-VO_2peak$(23~61%). The change in body fat-related factors was significantly lower in the NB compared to the CON group. Moreover, TC and LDL were decreased whereas BMC was increased in the NB group after Nurida-ball exercise. The change in VEpeak and performance time of GXT were significantly greater in the NB compared to the CON group. The performance time of GXT was increased in the NB group after Nurida-ball exercise. Our results indicated that Nurida-ball exercise would be effective equipment for the improvement of health-related fitness. Especially, Nurida-ball exercise can affect body composition and cardiovascular function, which might alleviate metabolic syndrome-related diseases in middle-aged men.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E2
• /
• pp.89-98
• /
• 2006

Two tobacco cultivars (Nicotiana tabacum L.), Bel-B and Bel-W3, tolerant and sensitive to ozone, respectively, were grown in a greenhouse supplied with charcoal filtered air and exposed to 200 ppb ozone for 4 hr. Effects on chlorophyll fluorescence, net photosynthesis, and stomatal conductance are described. Quantum yield was calculated from chlorophyll fluorescence and the initial slope of the assimilation-light curve measured by the gas exchange method. Only the sensitive cultivar, Bel-W3, developed visual injury symptoms on up to 50% of the $5^{th}$ leaf. The maximum net photosynthetic rate of ozone-treated plants was reduced 40% compared to control plants immediately after ozone fumigation in the tolerant cultivar; however, photosynthesis recovered by 24 hr post fumigation and remained at the same level as control plants. On the other hand, ozone exposure reduced maximum net photosynthesis up to 50%, with no recovery, in the sensitive cultivar apparently causing permanent damage to the photosystem. Reductions in apparent quantum efficiency, calculated from the assimilation-light curve, differed between cultivars. Bel-B showed an immediate depression of 14% compared to controls, whereas, Bel-W3 showed a 27% decline. Electron transport rate (ETR), at saturating light intensity, decreased 58% and 80% immediately after ozone treatment in Bel-B and Bel-W3, respectively. Quantum yield decreased 28% and 36% in Bel-B and Bel-W3, respectively. It can be concluded that ozone caused a greater relative decrease in linear electron transport than maximum net photosynthesis, suggesting greater damage to PSII than the carbon reduction cycle.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.209-217
• /
• 2014

As an idea of healing or fatigue recovery, a desire for massage therapy has increased for modern people who complain of pain such as knotted muscles or shoulder discomfort due to fatigue accumulation and stress. To resolve this, although a massage chair has been developed, it does not provide the most efficient massage as it is not suitable for Korean body types. In this paper, this research analyzed massage, assembly, massage intensity, Korean body types and functions of the massage for maximized efficiency to design critical functions. Also, we implemented the action control and algorithm of the massage chair for localization.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1322-1327
• /
• 2007

Many automotive companies have tried to apply the aluminum alloy sheet to car body because reducing the car weight can improve the fuel efficiency of vehicle. In order to do that, sheet materials require of weldablity, formability, productivity and so on. Aluminum alloy was not easy to join these metals due to its material properties. Thus, the laser is good heat source for aluminum alloy welding because of its high heat intensity. However, the welding quality was not good by porosity, underfill, and magnesium loss in welded metal for AA5182 aluminum alloy. In this study, Nd:YAG laser welding of AA 5182 with filler wire AA 5356 was carried out to overcome this problem. The weldability of AA5182 laser welding with AA5356 filler wire was investigated in terms of tensile strength and Erichsen ratio. For full penetration, mechanical properties were improved by filler wire. In order to optimize the process parameters, model to estimate tensile strength by artificial neural network was developed and fitness function was defined in consideration of weldability and productivity. Genetic algorithm was used to search the optimal point of laser power, welding speed, and wire feed rate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.38-50
• /
• 1994

To improve the efficiency of internal combustion engines, it is necessary to understand mixed air-fuel in-cylinder flow processes accurately at intake and compression strokes. There is experimental and numerical methods to analyse in-cylinder flow process. In numerical method, standard $k-{\varepsilon}$ model with wall function was mostly adopted in in-cylinder flow process. But this type model was not efficiently predicted in the near wall region. Therefore in the present study, low Reynolds number $k-{\varepsilon}$ model was adopted near the cylinder wall and standard $k-{\varepsilon}$ model in other region. Also QUICK scheme was used for convective difference scheme. This study takes axisymmetric reciprocating model engine motored at 200rpm with a centrally located valve, incorporated 60 degree seat angie, and flat piston surface excluding inlet port. Because in-cylinder flow processes are undergoing unsteady and compressible, averaged cylinder pressure and inlet velocity at arbitrary crank angle are determined from thermodynamic analytic method and incylinder states at that crank angle are iteratively determined from the numerical analytic method.

• Advances in environmental research
• /
• v.1 no.4
• /
• pp.237-255
• /
• 2012

We review the research literature on relationship between environmental regulation and industrial development in three aspects of environmental regulation and investment, environmental regulation and efficiency, environmental regulation and trade. Indeed, the linkage between environmental regulation and material consumption of industrial system is absent. Environmental regulation is measured as the expenditure share for industrial pollutants abatement, and effluent charge intensity. Using panel-level data from 31 provinces, municipalities and autonomous regions in China, we build correlation models between material consumption and environmental regulation, results show that: (1) there are significant quadratic function relationship between material consumption and environmental regulation. And there is the fact that inflection point exists. (2) On basis of inflection points, we make two remarkable reflections. Firstly, the inflection points are the most important scale to judge reasonability and performance of regulations. Secondly, a Pareto improvement may occur when the regulations achieve a certain target. (3) Both intensities of industrial pollutants abatement expenditure and effluent charge have not yet achieved the expected target in most regions of mainland China at present. And most of regions of material consumption decreasing are distributed in western China. Main reasons lie in the impacts of industrial features as well as the regulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.326-328
• /
• 2015

Function of the window of the building is an environment of the room through the entry of solar radiation. It is vulnerable to significant energy conservation off the thermal efficiency. Also this summer, cooling costs are weighted because of excessive solar radiation. In this paper, we develop a windows automatic control system to use the indoor environmental information, such as home temperature, humidity, light intensity, solar radiation. The system collects the indoor environment information using a variety of sensor, using the collected information, and controls the motor to the system to control the window.