• 상하수도학회지
• /
• 제26권2호
• /
• pp.257-264
• /
• 2012

The concept of a non-contact type of UV disinfection system was introduced in this study. UV lamps and their quartz sleeves hang over the water surface and there is no interface between the sleeve and water. Obviously, there is no fouling. Based on optical laws and other UV distribution models, a detail mathematical model for a non-contact type UV disinfection system was developed in this study. Pathway length of UV light in a non-contact type photoreactor is longer than that in a submerged type photoreactor because the light is more refractive while passing through 3 interfaces of medium. But the pathway length passing through the water media is not significantly longer than that in a submerged type photoreactor so, the absorption of UV light by water is not significantly different from the other system. Due to the reflection effect, UV intensity is rapidly decreased as the horizontal distance from the light source is increased. The reflective attenuation in a non-contact type photoreactor is higher than that in a submerged type photoreactor. These mean that the short photoreactor is advantageous than the narrow-long photoreactor for the non-contact type photoreactor in an optical point of view.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1191-1200
• /
• 2002

The measurements of velocity vectors are made in the near wake(X/d=5.0) of a circular cylinder with serrated fins. Velocity of fluid which flow through fins decreases as increasing fin height and freestream velocity and decreasing fin pitch. Therefore the velocity distribution at X/d=0.0 has lower gradient with increasing freestream velocity and fin height and decreasing fin pitch. The discontinuity of the streamwise velocity gradient is observed near the fin edge and causes significant changes in V-component velocity distribution in the near wake. This change attributes to the differences in Strouhal number and entraintment flow behavior. Increased turbulent intensity around a circular cylinder due to the serrated fins and entrainment flow are important factors for the recovery of velocity defect. The widths of velocity and turbulent intensity distribution of fin tubes are wider than those of a circular cylinder. The normalized velocity and turbulent intensity distributions with a hydraulic diameter which is proposed in this paper are in closer agreement with those of a circular cylinder.

• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.1-7
• /
• 2003

배광분포를 측정함으로써 조명기구의 모든 광학적 특성을 계산해낼 수 있으며 이를 바탕으로 조명설계를 수행할 수 있다. 이러한 일련의 측정과 해석을 위해 배광측정기의 개발시에 배광해석용 소프트웨어 개발이 동시에 이루어져야 한다 연구진이 현재 개발하고 있는 소프트웨어는 조명기구의 광학적 특성을 파악하는 데 있어, 상당히 유용한 기능들을 포함하고 있다. 또한, 조명설계에 있어 근본적인 문제 해결의 과학적 검증을 제공함은 물론, 더 나아가 조명계산에 있어 하나의 표준을 마련하는 데 기여할 수 있을 것으로 보인다.

• 융합보안논문지
• /
• 제7권2호
• /
• pp.1-8
• /
• 2007

유한고장수를 가진 비동질적인 포아송 과정에 기초한 모형들에서 잔존 결함 1개당 고장 발생률 (강도함수)은 일반적으로 상수, 혹은 단조증가 및 단조 감소 추세를 가지고 있다. 본 논문에서는 기존의 소프트웨어 신뢰성 모형인 Goel-Okumoto 모형 강도함수를 재조명하고 이 분야에 적용 될수 있는 보다 넓은 왜도와 첨도를 가지는 Burr모형 강도 함수 및 의료정보분야 및 여러 분야에서 널리 사용되는 2모수 카파(Kappa(2)) 분포 모형 강도함수를 제안하여 비교하고자 한다. 수치적인 예에서는 고장 간격시간으로 구성된 NTDS(Naval Tactical Data System)자료를 이용하였고 모수추정 방법은 최우추정법과 일반적인 수치해석 방법인 이분법을 사용하여 모수 추정을 실시하였다. 그리고 모형 설정과 선택 판단기준은 편차 자승합을 이용한 적합도 검정이 사용되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.23-30
• /
• 1998

The stabilization characteristics of diffusion flame formed in the wake of a cylindrical flame holder were investigated. Distribution of turbulence intensity, concentration distribution of combustion gas, and ion currents were measured. The turbulence intensity in the wake of cylindrical- game holder is increased with increase of diameter or blockage ratio of grid. If the auxiliary fuel is injected into recirculation zone, the concentration of $C_3H_8$ is high, but the concentration of $CO_2$ is low at the boundary of recirculation zone. The region with highest average value of ion currents in the middle of flame is moved to the upstream side by the turbulent components of main stream. The flame mass with partially active reaction is moved fast for uniform flow and turbulence generator G3, but the flame mass with relatively slow reaction is moved slowly for turbulence generator G1.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.277-279
• /
• 2003

The study utilizes remote sensing as the main monitoring means. With different spatial high-resolution, multichannel ASTER remote sensing image as the main information in Beijing city zone; with regional border and statistical data as auxiliary factor a study between the thermal space distribution character and the underground medium is analyzed based on the GIS logical algorithm and synthetic analysis technology. Results show thermal forming mechanism and the rule of distribution is mainly related to the underground medium and the change of the city distribution. Different underground medium has different degree and intensity influence on the thermal space distribution. Furthermore, urban greenbelt and water areas can reduce the thermal effect and large-scale greenbelt creates green island effect. In addition, Road net, residential area, population density, heat resources and so on have some positive effect on the thermal distribution, which increase the local temperature and intensity on the other hand. It is important to study the thermal distribution and its related factors, which contributes to the plan, construction and development of the city.

• 한국수산과학회지
• /
• 제55권5호
• /
• pp.670-680
• /
• 2022

Owing to the lack of a cold-chain distribution system, most seafood is generally distributed under room temperature conditions. However the degradation of freshness during the distribution process can lead to disputes between sellers and consumers. The most widely used method for low-temperature distribution for seafood includes packaging it with styrofoam boxes and cold packs. In this study, vacuum-packed frozen fillets of four fish species of [white meat (Paralichthys olivaceus and Sebastes schlegelii) and red meat (Scomber japonicus and Scomberomorus niphonius)] were placed in styrofoam boxes with cold packs. Thereafter, changes in chemical (including pH, volatile basic nitrogen, and trimethylamine), physical (odor intensity, hardness, and chewiness), and microbial (viable cell count) characteristics of the fillets were measured during storage at 25℃. To identify the suitable method of determining freshness during the room-temperature distribution, several factors were considered, which included significant difference verification, correlation coefficients, and economic efficiency (experimental cost and time). Volatile basic nitrogen, pH, odor intensity, and viable cell count are the most rapid and accurate freshness indicators for determining freshness of frozen fish fillets during.

• 비파괴검사학회지
• /
• 제18권5호
• /
• pp.357-364
• /
• 1998

농도법과 카운트법에 의한 섬유 배향각 분포 측정의 정확도에 대해서 비교 검토하기 위하여, 섬유 종횡비와 면적비 및 섬유 배향 상태를 변화시켜 플로터로 섬유 배향 시뮬레이션 그림을 작도하여 섬유 배향 함수값을 구하였다. 이 섬유 배향 함수값을 시뮬레이션 그림에 대해 농도법과 카운트법으로 측정한 섬유 배향 함수값과 비교 검토하였다. 결국, 섬유 배향각 분포 측정의 정확도는 카운트법이 농도법보다 약 4% 정도 높게 나타남을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2159-2166
• /
• 1996

The stochastic properties of variation in fatigue crack growth are important in reliability and stability of structures. In this study,the stochastic model for the variation of fatigue crack growth rate was proposed in consideration of nonhomogeneity of materials. For this model, experiments were ocnducted on 7075-T6 aluminum alloy under the constant stress intensity factor range. The variation of fatigue crack growth rate was expressed by random variables Z and r based on the variation of material coefficients C and m in the paris-Erodogan's equation. The distribution of fatigue life with respect to the stress intensity factor range was evaluated by the stochastic Markov chain model based on the Paris-Erdogan's equation. The merit of proposed model is that only a small number of test are required to determine this this function, and fatigue crack growth life is easily predicted at the given stress intensity factor range.

• 한국의학물리학회지:의학물리
• /
• 제8권2호
• /
• pp.27-34
• /
• 1997

방사선치료에서 three dimensional conformal radiation therapy (3DCRT) 에 접근하는 방법으로 조사하는 방향에 따라 선량의 강도를 조절함으로서 암조직에만 집중적으로 선량을 조사하며 주위 정상조직에는 최소의 선량이 조사되도록 하는 방법으로 1990년대부터 Memorial Sloan-Kettering Cancer Center를 중심으로 연구되었다. 암조직의 치료부피를 최적화하기 위하여 암조직의 모양에 따라 선량분포곡선이 이루는 치료용적이 종양용적과 같아야 한다. 이러한 3DCRT는 암조직에 집중적으로 선량을 조사할 수 있어서 중요장기들의 한계선량을 유지하면서 암조직에 조사되는 선량을 20％ 정도 증가시킬수 있다. 방사선치료의 궁극적인 목적이 종양부위에 균등한 치유선량이 도달되게하고 병변 부위의 정상조직의 손상을 최소가 되게 하는 것이며, 이러한 수행을 위하여 CT planning 등을 이용하여 치료계획을 수립하여 치료용적과 종양용적을 거의 같게 할 수 있다. 본 연구에서는 조사하는 부위에서 선량의 강도를 조절하여 암조직의 치료용적을 최적화하는 3DCRT를 얻는 것을 목적으로 폐암환자에서 강도 조절법을 사용한 치료계획에서 일반적인 치료계획을 시행한 경우를 비교하면 종양용적에 접근한 치료계획과 정상조직에 대한 선량 감소를 보여주고 있으며, 직장암 환자에서도 두 치료계획에서 선량분포가 잘 비교가 됨을 볼 수 있다.