• The Journal of Korean Physical Therapy
• /
• v.36 no.1
• /
• pp.9-13
• /
• 2024

Purpose: Although microwave diathermy is widely employed, research conducted in South Korea indicates a lack of theoretical understanding concerning the appropriate application intensity. Consequently, there is a need to enhance the objectivity of microwave diathermy by conducting quantitative studies to determine its effective application intensity and provide suitable application parameters. Methods: The study was performed on 60 participants, divided equally into 40W or 80W microwave diathermy intervention groups. Microwave diathermy was applied at 2,450MHz to iliocostalis and longissimus muscles for 15 minutes in each group. Ranges of motion were compared before and after intervention using straight leg raise (SLR) test results. The analysis was performed using the paired t-test and the independent t-test. Results: SLR angles increased significantly in both groups after intervention, but the 80W group exhibited a greater post-intervention angle increase. While no significant intergroup difference was observed between pre-intervention angles, post-intervention angles were significantly different. Conclusion: The study confirms that microwave diathermy treatment at 40W for 15 minutes effectively increases SLR angles but that treatment at 80W has a greater effect. Further research is warranted to establish quantitatively the optimal time and intensity settings for microwave diathermy.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.180-187
• /
• 2022

In order to select suitable light in a plant factory, electric energy use efficiency and light use efficiency should be considered simultaneously to consider operating costs as well as quantitative and functional aspects. The growth characteristics, electric energy use efficiency, light use efficiency by light intensity, LED ratio, and photoperiod conditions were compared together. Light intensity is 60, 130, 230, and 320 µmol·m^-2·s^-1 treatments, and light quality is the mixing ratio of red light and blue light 8:2, 6:4, 4:6, and 2:8 treatments. Photoperiod is 9, 12, 15, and 18 hours treatments based on the daytime. In the light intensity experiment, the growth rate increased as the light intensity increased, but there was no significant difference in the light use efficiency. When comparing the leaf fresh weight per power consumption, only the 320 µmol·m^-2·s^-1 treatment group showed significantly low efficiency, and there was no significant difference in the other treatments, so 230 µmol·m^-2·s^-1, which produced the most, was the most efficient. In the light quality experiment, the ratio of red light and blue light was measured to be high at the same time as the growth rate and light use efficiency in RB 8:2, and there was no significant difference in color difference and flavonoids content, so a Red:Blue ratio of 8:2 was the most suitable condition. In the photoperiod experiment, the longer the photoperiod, the higher the growth rate. However, there was no significant difference in the growth rate over 12 hours of daytime, so 12 hours considering the light consumption efficiency was a suitable condition. Based on the above results, LED light environmental conditions for perilla growth in plant factories were light intensity, light quality, and day length of 230 µmol·m^-2·s^-1 or more, 8:2, and 12 hours or more, respectively.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.115-122
• /
• 1999

Because of their small mass, volume, solid state construction and long life, light-emitting diodes(LEDs) hold promises as a lighting source for intensive plant production system. Spectral characteristics and light intensity of LEDs were tested to investigate their feasibility as artificial lighting sources for growth and morphogenesis control in transplant production system. Blue, green, and red LEDs had a peak-emission wavelength at 442nm, 522nm, and 673nm, respectively. Their half width defined as the difference between upper and lower wavelength in the intensity equivalent to 50% of the maximum intensity showed 26nm, 41nm, and 74nm, respectively. Photosynthetic photon flux(PPE) at the distance of 9cm under the LEDs array was measured as $235{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for red, $109{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for green, and $75{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for blue LEDs. At the same distance, green LEDs had the illuminance of 13,0001x, nine to ten times higher than those of red and blue LEDs. Red, green, and blue LEDs at a distance of 9cm had the irradiance of $46W{\cdot}m^{-2},\;19W{\cdot}m^{-2},\;8W{\cdot}m^{-2}$, respectively. Light intensity of blue, green, and red LEDs increased linearly in proportion to the magnitude of the current applied to the operating circuit. Thus the light intensity of LEDs was controlled by the applied current in operating circuit.

• Journal of KIISE:Software and Applications
• /
• v.36 no.6
• /
• pp.491-497
• /
• 2009

This paper proposes a new feature weighting method for document sentiment classification. The proposed method considers the difference of sentiment intensities among sentences in a document. Sentiment features consist of sentiment vocabulary words and the sentiment intensity scores of them are estimated by the chi-square statistics. Sentiment intensity of each sentence can be measured by using the obtained chi-square statistics value of each sentiment feature. The calculated intensity values of each sentence are finally applied to the TF-IDF weighting method for whole features in the document. In this paper, we evaluate the proposed method using support vector machine. Our experimental results show that the proposed method performs about 2.0% better than the baseline which doesn't consider the sentiment intensity of a sentence.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.2
• /
• pp.140-147
• /
• 1999

Since the national land area is small and the fanning land occupies only 24% of total land area in Korea, the promotion of agricultural productivity is urgent. In this process, the application rate of chemical fertilizer, which is the major pollution factor at agricultural non-point sources, has been increasing in every year. The present study examined difference of runoff loading of nitrogen and phosphorus by rainfall intensity(above 100mm, 80-100mm, 50-80mm and 30-50mm). Runoff loading of nitrogen and phosphorus by rainfall intensity has differences under similar rainfall intensity. We are considering that these results were affected by rainfall intensity as well as hydrological condition, soil management, whether or not fertilizer application, cropping, rice straw and plowing.

• Journal of Korea Water Resources Association
• /
• v.33 no.2
• /
• pp.263-276
• /
• 2000

This paper is to derive the probable rainfall depths and the probable rainfall intensity formulas for Inchon Metropolitan district. The annual maximum rainfall data from 10 min. to 6 hours have been collected from the Inchon weather station. Eleven types of probability distribution are considered to estimate probable rainfall depths for 12 different storm durations at the Inchon Metropolitan district. Three tests including Chi-square, Kolmogorov-Smimov and Cramer Von Mises with the graphical analysis are adopted to select the best probability distribution. The probable rainfall intensity formulas are then determined by the least squares method using the trial and error approach. Five types of Talbot type, Sherman type, Japanese type, Unified type I, and Unified type II are considered to determine the best type for the Inchon rainfall intensity. The root mean squared errors are computed to compare the accuracy from the derived formulas. It has been suggested that the probable rainfall intensities having Unified type I for the short term duration should be the most reliable formulas by considering the root mean squared errors and the difference between computed probable rainfall depth and estimated probable rainfall depth.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.141-150
• /
• 2000

In order to genralize the vertical dispersion of plume at long distances on mesoscale over complex terrain dispersion coefficients data have been obtained systematically according to lapsed time after release by using a composite turbulence water tank that simulates convective boundary layer. Dispersion experiments have been carried out for various combined conditions of thermal turbulence intensity mechanical turbulence intensity and plume release height at slightly to moderately unstable conditions. Results of tracer dispersion experiments conducted using water tank camera and image processing system have been converted into atmospheric dispersion data through the application of similarity law. The equation $\sigma$z/Zi=aX/(b+c X2)0.5 where $\sigma$2; vertical dispersion coefficient zi : mixing height X : dimen-sionaless downwind distance was confirmed to be an appropriate and general equation for expressing $\sigma$2 variation with turbulence intensity and plume release height, The value of "a" was found to be principally affected by mechanical turbulence intensity and that of "b" by mechanical turbulence intensity and release height. It was confirmed that the magnitude of "c" varies with release height. Results of water tank experiments on the relationship of $\sigma$2 vs downwind distance x have been compared with actual atmospheric dispersion data such as CONDORS data and Bowne's nomogram Operating conditions of a composite turbulence water tank for simulating the field turbulence situations of CONDORS experiments and Bowne's $\sigma$2(x) nomogram for suburban area have also been investigated in terms of water temperature difference between convection water tank and bottom plate heating tank grid plate stroke mixing water depth length scale and velocity scale. Moreover the effect of mechanical turbulence intensity on vertical dispersion has been discussed in the light of release height and downwind distance. height and downwind distance.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.1
• /
• pp.1-25
• /
• 2006

Technological innovation is being recognized as a core capability of competitive advantage for sustainable growth of a company. In this regard, lots of research activities have been conducted on technological innovation and performance at firm level. Ihis study empirically investigates those relationship with cross-sectional and time-series data according to firm-specific characteristics along industry. Patent intensity, R&D intensity, and intangible asset intensity smoothing by firm size are used as proxy measures for explanation of performance with net income per employee. As a result with 162 high-tech firms for 11 years, it was found that high performances were positively related to patent and R&D intensity. Also, firms classified into 8 categories based on firm-specific technological innovation characteristics show difference upon performances. To sum up, firms that have high patent and R&D intensity demonstrate high performance compared to other firms.

• The Journal of Korean Physical Therapy
• /
• v.32 no.2
• /
• pp.132-136
• /
• 2020

Purpose: The talk test (TT) is an alternative, self-reported method for prescribing and guiding exercise training in both healthy adults and patients with cardiovascular and pulmonary diseases. This study examined whether the TT is a valid tool for evaluating the exercise intensity during two different types of aerobic activity on a treadmill or stationary bicycle in a healthy population. Methods: A total of ten subjects (six males and four females) who had no medical history related to musculoskeletal, cardiovascular, and pulmonary disorders were enrolled in this study. They were evaluated using the TT, which consisted of three-level of difficulties demanding cardiac loads while performing aerobic activities on a treadmill and bicycle ergometer across two consecutive days in a counterbalanced manner. During the activities, the psychophysiological response markers were collected in terms of the heart rate, oxygen saturation, rating of perceived exertion, and metabolic equivalents. Results: Statistical analyses revealed a significant difference in the between-subject variance regarding the TT level effect (p<0.05). On the other hand, no significant findings were detected on the between-group variance(p>0.05) and the TT level×group interaction (p>0.05). The independent t-test indicated no significant differences in heart rate, oxygen saturation, rating of perceived exertion, and metabolic equivalents at any levels of the TT in the two groups. The TT showed a strong correlation with the rating of perceived exertion. Conclusion: This study showed that the TT is a valid and alternative tool for evaluating the aerobic exercise intensity in a healthy population. In addition, differences in the psychophysiological response markers between two aerobic activities, treadmill and bicycle ergometer, were detected in the same exercise intensity scaled with the TT. The TT can be used to evaluate and prescribe the exercise intensity of aerobic activity in cardiovascular and pulmonary physical therapy.

• Animal cells and systems
• /
• v.14 no.2
• /
• pp.125-128
• /
• 2010

This study investigated the effect of different light intensities on first feeding of chub mackerel Scomber japonicus larvae. Fertilized eggs, obtained from LHRHa-induced spawning of captive broodstock, were stocked (60 larvae/l) into twelve 30-1 aquaria under light intensities of 0, 100, 200, 500 and 1000 lx, with three replicate aquaria per treatment. Temperature was maintained at $20^{\circ}C$ and salinity was 35 psu. Larvae were fed the rotifer Brachionus rotundiformis at a density of five rotifers/ml. Feeding incidence was measured as the percentage of larvae with prey in the digestive tract. Feeding intensity was evaluated as the number of prey in the digestive tract of the larvae. Larvae fed in darkness (0 lx) had significantly lower (P < 0.05) feeding incidence ($13{\pm}0.05%$ larvae with prey) and feeding intensity ($1.00{\pm}0.05$ rotifers per larva) than those larvae fed at 100 ($30{\pm}0.07%$, $1.17{\pm}0.09$ rotifers per larva), 200 ($43{\pm}0.08%$, $1.24{\pm}0.11$ rotifers larvae$^{-1}$), 500 ($53{\pm}0.08%$, $1.48{\pm}0.14$ rotifers per larva) and 1000 lx ($60{\pm}0.08%$, $1.38{\pm}0.13$ rotifers per larva). The feeding incidence of S. japonicus larvae increased with light intensity while feeding intensity showed no significant difference (P > 0.05) between light treatments.