• 제목/요약/키워드: Intelligent Speed Estimation

검색결과 97건 처리시간 0.03초

지능형 철도 시스템 모델 개발을 위한 컬러비전 기반의 소형 기차 위치 측정 (Estimation of Miniature Train Location by Color Vision for Development of an Intelligent Railway System)

  • 노광현;한민홍
    • 제어로봇시스템학회논문지
    • /
    • 제9권1호
    • /
    • pp.44-49
    • /
    • 2003
  • This paper describes a method of estimating miniature train location by color vision for development of an intelligent railway system model. In the teal world, to control trains automatically, GPS(Global Positioning System) is indispensable to determine the location of trains. A color vision system was used for estimating the location of trains in an indoor experiment. Two different rectangular color bars were attached to the top of each train as a means of identifying them. Several trains were detected where they were located on the track by color feature, geometric features and moment invariant, and tracked simultaneously. In the experiment the identity, location and direction of each train were estimated and transferred to the control computer using serial communication. Processing speed of up to 8 frames/sec could be achieved, which was enough speed for the real-time train control.

풍력발전 시스템을 위한 풍속 추정기 개발 (Development of Wind Speed Estimator for Wind Turbine Generation System)

  • 김병문;김성호;송화창
    • 한국지능시스템학회논문지
    • /
    • 제20권5호
    • /
    • pp.710-715
    • /
    • 2010
  • 최근 풍력발전 시스템은 가장 빨리 발전하고 있는 신재생 에너지원중 하나로 각광을 받고 있으며, 풍력발전 시스템의 주된 관심사는 어떻게 광범위한 풍속의 변화에서도 효율적으로 시스템을 동작시키는 가에 있다. 일반적으로 풍속은 풍력발전시스템의 동특성에 큰 영향을 미치는 요소이다. 따라서 많은 풍력발전 제어 알고리듬은 성능향상을 위해 풍속의 측정을 요구하게 된다. 그러나 불행히도 풍속계와 같은 센서에 의한 실효 풍속의 정확한 측정은 어려운 실정이며 따라서 제어 시스템의 동작을 위해 풍속은 여러 가지 기법을 통해 추정되고 있는 실정이다. 이에 본 연구에서는 칼만 필터 및 신경망에 기반한 새로운 형태의 풍속 추정 기법을 제안하고 제안된 기법의 유용성 확인을 위해 다양한 형태의 시뮬레이션을 수행하고자 한다.

퍼지모델링을 이용한 고속 소형선의 저항 및 마력추정 (Resistance & EHP estimation about a high speed boat using fuzzy modeling)

  • 김수영;김현철;백준명
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
    • /
    • pp.110-117
    • /
    • 1995
  • 본 연구는 퍼지모델링을 이용한 고속 소형선의 전체 저항곡선 및 마력곡선을 고속 소형선의 선형요소 자료들로부터 퍼지모델링 알고리즘을 통해 도출하고, 그 결과를 모형시 험 결과와 비교하고 있다. 또한 퍼지모델링 알고리즘에 의한 전체 저항곡선 및 마력곡선이 고속 소형선의 선형요소 결정에 효율적으로 적용됨을 보이고 있다.

  • PDF

LM-FNN 제어기에 의한 IPMSM의 고성능 속도제어 (High Performance Speed Control of IPMSM with LM-FNN Controller)

  • 남수명;최정식;정동화
    • 전력전자학회논문지
    • /
    • 제11권1호
    • /
    • pp.29-37
    • /
    • 2006
  • 본 논문에서는 LM-FNN(learning Mechanism-Fuzzy Neural Network) 제어기를 이용하여 IPMSM 드라이브의 고성능 속도를 제어한다. 고성능제어를 위하여 신경회로망과 퍼지제어를 혼합 적용한 FNN을 설계한고 더욱 성능을 개선하기 위하여 학습 메카니즘을 이용하여 FNN 제어기의 파라미터를 갱신시킨다. 그리고 ANN(Artificial Neural Network)을 이용하여 IPMSM 드라이브의 속도 추정기법을 제시한다. 추정속도의 타당성을 입증하기 위하여 시스템을 구성하여 제어특성을 분석한다. 그리고 추정된 속도를 지령속도와 비교하여 전류제어와 공간벡터 PWM을 통하여 IPMSM의 속도를 제어한다. 본 연구에서 제시한 LM-FNN과 ANN 제어기의 제어특성과 추정성능을 분석하고 그 결과를 제시한다.

지능 제어기를 이용한 SRM 센서리스 속도제어에 관한 연구 (Sensorless speed control of a Switched Reluctance Motor using intelligent controller)

  • 최재동;김민태;오성업;황영성;김영록;성세진
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.179-183
    • /
    • 1999
  • This paper describes a new method for indirect sensing of the rotor position in switched reluctance motors using fuzzy logic algorithm. Through a novel fuzzy algorithm, the complete SRM magnetizing characterization is first constructed, and then used to estimate the rotor position. And also, the optimized phase is selected by phase selector. To demonstrate the promise of this approach, the proposed rotor position estimation algorithm is simulated for variable speed range.

  • PDF

UIO를 이용한 선회 시 등판각 추정 (Climbing Angle Estimation in Yawing Motion by UIO)

  • 변형규;김현규;김인근;허건수
    • 한국자동차공학회논문집
    • /
    • 제23권5호
    • /
    • pp.478-485
    • /
    • 2015
  • Availability of the climbing angle information is crucial for the intelligent vehicle system. However, the climbing angle information can't be measured with the sensor mounted on the vehicle. In this paper, climbing angle estimation system is proposed. First, longitudinal acceleration obtained from gyro-sensor is compared with the actual longitudinal acceleration of the vehicle. If the vehicle is in yawing motion, actual longitudinal acceleration can't be approximated from time derivative of wheel speed, because lateral velocity and yaw rate affect actual longitudinal acceleration. Wheel speed and yaw rate can be obtained from the sensors mounted on the vehicle, but lateral velocity can't be measured from the sensor. Therefore, lateral velocity is estimated using unknown input observer with nonlinear tire model. Simulation results show that the compensated results using lateral velocity and yaw rate show better performance than uncompensated results.

파티클 필터에 기반한 새로운 상태 예측 방법 (A New Approach of State Estimation based on Particle Filter)

  • 박성근;류경진;황재필;김은태
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 2006년도 춘계학술대회 학술발표 논문집 제16권 제1호
    • /
    • pp.245-248
    • /
    • 2006
  • A particle filter is one of the most famous filters. The reason why the particle filter is widely used is that particle deals with the state estimation problem for not only linear models with Gaussian noise but also the non-linear models with non-Gaussian noise and it receives great attention from many engineering fields. In the point of view state estimator, particle filter is feedforward observer. According to the characteristic of dynamic system, the feedforward observer can estimate real state. However, the speed of convergence of feedforward observer between the actual state and the estimated state cannot be satisfied. Since the particle filter is a sort of feedforward observer, the convergence speed of particle filter is slow, and the particle filter cannot estimate actual state like particle collapse problem. In order to overcome the limitation of particle filter as a kind of feedfoward estimator, we propose a new particle filter which has feedback term, called particle filter with feedback. Our proposed method is analyzed theoretically and studied by computer simulation. Comparisons are made with other filtering mehod.

  • PDF

최적교통정보 (Optimal Traffic Information)

  • 홍유식;박종국
    • 한국지능시스템학회논문지
    • /
    • 제13권1호
    • /
    • pp.76-84
    • /
    • 2003
  • 요즈음에는 GPS 및 GIS을 기반으로, 운전자에게 최단 경로탐색 및 예상도착시간을 인터넷 및 휴대폰으로 검색할 수 있다. 그러나, 아무리 좋은 자동항법 장치도 평균차량속도가 10- 20 Km 일 때에는 최단경로를 생성할 수 없다. 그러므로 승용차대기시간과 평균차량속도를 개선하기 위해서, 서로 다른 교차로 길이 및 교차로 차선수 일 때에도, 퍼지 적응 규칙을 이용한 최적녹색시간 알고리즘을 제안한다. 본 논문에서는 인터넷을 이용해서 위험한 도로, 공사중인 도로 및 목적지 예상 도착시간 및 최적의 교통상황을 예보하는 기능을 제공할 수 있도록 하였다.

퍼지 속도 추정기를 이용한 유도전동기 속도 센서리스 제어 (Speed Sensorless Control of an Induction Motor using Fuzzy Speed Estimator)

  • 최성대;김낙교
    • 전기학회논문지
    • /
    • 제56권1호
    • /
    • pp.183-187
    • /
    • 2007
  • This paper proposes Fuzzy Speed Estimator using Fuzzy Logic Controller(FLC) as a adaptive law in Model Reference Adaptive System(MRAS) in order to realize the speed-sensorless control of an induction motor. Fuzzy Speed Estimator estimates the speed of an induction motor with a rotor flux of the reference model and the adjustable model in MRAS. Fuzzy logic controller reduces the error of the rotor flux between the reference model and the adjustable model using the error and the change of error of the rotor flux as the input of FLC. The experiment is executed to verify the propriety and the effectiveness of the proposed speed estimator.

개선된 미분 진화 알고리즘에 의한 퍼지 모델의 설계 (Design of Fuzzy Models with the Aid of an Improved Differential Evolution)

  • 김현기;오성권
    • 한국지능시스템학회논문지
    • /
    • 제22권4호
    • /
    • pp.399-404
    • /
    • 2012
  • Evolutionary algorithms such as genetic algorithm (GA) have been proven their effectiveness when applying to the design of fuzzy models. However, it tends to suffer from computationally expensWive due to the slow convergence speed. In this study, we propose an approach to develop fuzzy models by means of an improved differential evolution (IDE) to overcome this limitation. The improved differential evolution (IDE) is realized by means of an orthogonal approach and differential evolution. With the invoking orthogonal method, the IDE can search the solution space more efficiently. In the design of fuzzy models, we concern two mechanisms, namely structure identification and parameter estimation. The structure identification is supported by the IDE and C-Means while the parameter estimation is realized via IDE and a standard least square error method. Experimental studies demonstrate that the proposed model leads to improved performance. The proposed model is also contrasted with the quality of some fuzzy models already reported in the literature.