• 한국지능시스템학회논문지
• /
• 제15권5호
• /
• pp.567-572
• /
• 2005

최근 컴퓨터의 소형화와 인터넷의 대중화와 함께 유비쿼터스 컴퓨팅도 많은 주목을 받고 있다. 언제 어디서나 원하는 서비스를 제한 없이 받을 수 있는 유비쿼터스 시대가 도래하면서 유비쿼터스 환경을 어떻게 제시하고, 어떤 서비스와 이용 방법을 사용자에게 어떻게 제공할 것인지가 중요해 지고 있다. 본 논문에서는 유비쿼터스 환경에서 지능 에이전트를 사용하여 사용자의 목적에 가장 적합한 장치가 구성할 수 있도록 하는 방법을 제안하였다. 검색 에이전트가 주변 장치들을 검색하여 기능별 목록을 작성하고 서버로 전송하면 서버는 전송 받은 정보를 지능 시스템을 통하여 학습하게 된다. 즉, 사용자가 목록에 따라 언어 항으로 작업 정보를 입력하면 서버가 작업 환경에 적합한 시스템을 선택하고, IP 어드레스를 이용하여 시스템을 구성하도록 하였다. 이것을 응용 예를 통하여 구현하고 실험을 통해 확인하였다.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.79-86
• /
• 2008

This paper describes the development of wearing intelligent shoe system to measure applied forces and moments (ground reaction forces and moments) on the soles of feet during human walking. In order to walk safely, robot must get the intelligent feet with 6-axis force/moment sensors (Fx sensor (x-direction force sensor), Fy sensor, Fz sensor, Mx sensor (Mx : x-direction moment sensor), My sensor, and Mz sensor) and detect the forces and moments data from the sensors. And the feet must be controlled with the data and controllers. While a human is walking, the forces and moments should be measured and analyzed for robot's intelligent feet. Therefore, the wearing intelligent shoe system should be developed. In this paper, four 6-axis farce/moment sensors and two high speed measuring devices were designed and fabricated, and the wearing intelligent shoe system was made using these. The characteristic tests of the wearing intelligent shoe system were performed, and the forces and moments were detected using it.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.236-239
• /
• 2003

In this paper, we investigate the issues for the design and implementation of tele-operation system based on the haptic interface. Here, the 3-DOF haptic device and the x-y-z stage are employed as master controller and slave system respectively. In this master-slave system, the force feedback algorithm, the modeling of virtual environments and the control method of x-y-z stage are proposed. In this paper, inernet network is used for data communication between master and slave. We construct virtual environment of the real convex surface from the force-feedback in controlling the X-Y-Z stage and getting the force applied by the 3-DOF haptic device.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.155-160
• /
• 2002

In this paper, a controller design for brushless linear motor is implemented. The designed controller is mainly composed of current, speed and position controller, which are carried out by the high-speed digital signal processor (DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented by using 32-bit DSP (TMS320C31), a high-integrated logic device (EPM7192), and IPM (Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for the brushless linear motor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.435-438
• /
• 2004

Lately, the Intelligent Electronic Device(ED) and the Power System Automation make subjects of discussions and studies. The IED uses microprocessors to practice a lot of functions. In the analog time, an equipment practices only one or two functions. But according to the development of microprocessor and digital technology, it can be implemented by using those kinds of state of the art technology and its function is become more and more powerful. Also, the proliferation of IED makes possible to construct power system automation. An automation of power system make more convenient, safe, and accurate power system. In this paper, a digital protective relay which is a kind of IED and the power automation system are briefly discussed with development and application cases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1913-1914
• /
• 2006

Modem Industrial control systems tend to adopt a variety of intelligent wireless device controllers to interface front-end computers with active components of the industrial device. Some of the intelligent control systems come equipped with a wireless SMS(Simple Message Service) interface giving an opportunity to use fault alarm Interlock system. Immediately send warning or alert messages to Mobile devices or remote users. Real time monitoring the SMS systems by Mobile devices. Control systems remotely by mobile devices in emergency situation. In order to provide against system fault, SMS Mobile System will enable system administrator to promptly access, monitor and control the system whenever users want and wherever users are, by utilizing wireless Internet and mobile devices. This paper presents the Mobile SMS system for PAL Control System.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.64-68
• /
• 1997

In this paper, a controller for the linear motor with high speed and stiffness is implemented using SERCOS interface which is a real time communication protocol between the numerical controller(NC) and the motor driver. The proposed controller is mainly composed of current, speed, and position controller, which are designed using the 32-bit DSP(TMS320C31), a high-integrated logic device (EPM7128), and Intelligent Power Module(IPM) to enhance reliability and compactness of the system. The experimental results show the effective performance of the proposed controller for he linear motor with high speed and stiffness.

• 산업기술연구
• /
• 제29권B호
• /
• pp.133-137
• /
• 2009

This paper presents the development of smart road line lamp system consisting light control device. It can perform the individual power control or partial on/off control of a LED lamp by control center and can detect the error of the LEDs by current sensing. Also, the ability to control the brightness and period of on/off by detecting the car's existence. This light control circuit consists of road line lamp unit device. It can give a lot of solutions when the server, which controls the whole system, is operated through CDMA(Code-Division Multiple Access) network.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.167-169
• /
• 2001

In this paper, a controller design for high speed and stiffness linear motor is implemented. The designed controller is mainly composed of speed and current controller, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented by using 32-bit DSP(TMS320C31), a high-integrated logic device(EPM7128), and IPM(Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for high speed and stiffness linear motor.

• 제어로봇시스템학회논문지
• /
• 제16권10호
• /
• pp.919-926
• /
• 2010

This paper proposes a wearable hand rehabilitation device, DULEX, for persons with functional paralysis of upper-limbs after stoke. DULEX has three degrees of freedom for rehabilitation exercises for wrist and fingers except the thumb. The main function of DULEX is to extend the range of motions of finger and wrist being contracture. DULEX is designed by using a parallel mechanism, and its parameters such as length and location of links are determined by kinematic analysis. The motion trajectory of the designed DULEX is aligned to human hand to prevent a slip. To reduce total weight of DULEX, artificial air muscles are used for actuating each joint motion. In feedback control, each joint angle is indirectly estimated from the relations of the input air pressure and the output muscle length. Experimental results show that DULEX is feasible in hand rehabilitation for stroke survivals.