• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2562-2568
• /
• 2015

본 논문에서는 네트워크 RTK (Real Time Kinematic) 환경에서 기준국 간 이온층 지연 변칙현상에 대해 검출하는 기법을 제안한다. 태양흑점 폭발이나 지자기 폭풍 등으로 인해 이온층 지연의 시공간적 변화가 심해지면 네트워크 공간 안에서 이온층 지연의 선형성을 보장할 수 없게 된다. 이 때, 생성된 보정정보를 사용자가 사용하면 잘못된 미지정수를 결정하여 위치 오차가 증가하는 현상이 발생할 수 있다. 따라서 신뢰성있는 보정정보를 사용자에게 제공하기 위해서 이온층 지연에 변칙현상을 검출하는 기법이 필요하다. 본 논문에서 제안한 기법은 보정정보의 전파성 항으로 이온층 지연 변칙현상을 검출하기 위한 지표를 계산하고, 이를 임계치와 비교해서 이온층 지연 변칙현상 발생을 판단한다.

• Structural Monitoring and Maintenance
• /
• 제2권3호
• /
• pp.269-282
• /
• 2015

Civil structures should be designed with the lowest cost and longest lifetime possible and without service failure. The efficient and sustainable use of materials in building design and construction has always been at the forefront for civil engineers and environmentalists. Timber is one of the best contenders for these purposes particularly in terms of aesthetics; fire protection; strength-to-weight ratio; acoustic properties and seismic resistance. In recent years, timber has been used in commercial and taller buildings due to these significant advantages. It should be noted that, since the launch of the modern building standards and codes, a number of different structural systems have been developed to stabilise steel or concrete multistorey buildings, however, structural analysis of high-rise and multi-storey timber frame buildings subjected to lateral loads has not yet been fully understood. Additionally, timber degradation can occur as a result of biological decay of the elements and overloading that can result in structural damage. In such structures, the deficient members and joints require strengthening in order to satisfy new code requirements; determine acceptable level of safety; and avoid brittle failure following earthquake actions. This paper investigates performance assessment and damage assessment of older multi-storey timber buildings. One approach is to retrofit the beams in order to increase the ductility of the frame. Experimental studies indicate that Sprayed Fibre Reinforced Polymer (SFRP) repairing/retrofitting not only updates the integrity of the joint, but also increases its strength; stiffness; and ductility in such a way that the joint remains elastic. Non-linear finite element analysis ('pushover') is carried out to study the behaviour of the structure subjected to simulated gravity and lateral loads. A new global index is re-assessed for damage assessment of the plain and SFRP-retrofitted frames using capacity curves obtained from pushover analysis. This study shows that the proposed method is suitable for structural damage assessment of aged timber buildings. Also SFRP retrofitting can potentially improve the performance and load carrying capacity of the structure.

• Structural Monitoring and Maintenance
• /
• 제2권3호
• /
• pp.283-300
• /
• 2015

Visual condition inspections remain paramount to assessing the current deterioration status of a bridge and assigning remediation or maintenance tasks so as to ensure the ongoing serviceability of the structure. However, in recent years, there has been an increasing backlog of maintenance activities. Existing research reveals that this is attributable to the labour-intensive, subjective and disruptive nature of the current bridge inspection method. Current processes ultimately require lane closures, traffic guidance schemes and inspection equipment. This not only increases the whole-of-life costs of the bridge, but also increases the risk to the travelling public as issues affecting the structural integrity may go unaddressed. As a tool for bridge condition inspections, Unmanned Aerial Vehicles (UAVs) or, drones, offer considerable potential, allowing a bridge to be visually assessed without the need for inspectors to walk across the deck or utilise under-bridge inspection units. With current inspection processes placing additional strain on the existing bridge maintenance resources, the technology has the potential to significantly reduce the overall inspection costs and disruption caused to the travelling public. In addition to this, the use of automated aerial image capture enables engineers to better understand a situation through the 3D spatial context offered by UAV systems. However, the use of UAV for bridge inspection involves a number of critical issues to be resolved, including stability and accuracy of control, and safety to people. SLAM (Simultaneous Localisation and Mapping) is a technique that could be used by a UAV to build a map of the bridge underneath, while simultaneously determining its location on the constructed map. While there are considerable economic and risk-related benefits created through introducing entirely new ways of inspecting bridges and visualising information, there also remain hindrances to the wider deployment of UAVs. This study is to provide a context for use of UAVs for conducting visual bridge inspections, in addition to addressing the obstacles that are required to be overcome in order for the technology to be integrated into current practice.

• 한국컴퓨터정보학회논문지
• /
• 제11권4호
• /
• pp.155-164
• /
• 2006

Ubiquitous-IT839전략 중에 8대 신규서비스에 VoIP 기술이 들어있다. 본 논문은 VoIP 인터넷 네트워크에 연결된 소프트폰과 LAN 구간과 연결된 인터넷전화 및 디바이스, IP PBX, 기간사업자 망이 연결된 WAN 구간에서의 VoIP 서비스의 도청 실험을 하였다. 실험 네트워크에서 도청 실험을 한 결과 CVE 리스트에 따르는 단말기와 Proxy 및 허브와 같은 VoIP 네트워크의 연결점에서의 취약점이 발견되었고, 해커의 공격에 의한 도청이 성공되었다. 현재 070으로 명명된 VoIP 네트워크에서 각 도청 구간별로 접근제어, 기밀성, 신뢰성, 가용성, 무결성, 부인봉쇄의 6가지 보안기능의 관점에서 도청의 보안방안을 적용하였다. 보안 방안의 적용 후에 도청 실험을 실시한 결과, 패킷에 대한 AES 암호화로 내용의 도청을 방지하였으며, 접근차단과 인증 및 메시지 해시함수 및 착신거절의 사용으로 도청을 예방하였고. 네트워크 모니터링과 감사기록으로 보안성과 감사기록을 유지하여 VoIP 정보보호를 이룩할 수 있었다.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.303-309
• /
• 2018

사물인터넷 기술은 모든 사물을 인터넷에 연결하고 상호 작용하는 지능형 서비스로 군사지역의 탐색 목적은 물론 산업시스템에서의 디바이스 관리, 공정 관리, 비인가 지역의 모니터링 등 다양한 분야에 활용 가능한 기술이다. 하지만, 모든 기기들이 인터넷에 연결됨에 따라, 보안 취약점을 이용하는 다양한 공격으로 경제적 손실이나 개인정보 유출 등 다양한 피해를 발생 시키고 있으며, 추후 의료 서비스나 군사적 목적의 취약점 공격을 이용할 경우 인명 피해까지 발생할 수 있다. 따라서, 제안하는 논문에서는 통신 과정에서 해시체인 기반의 S/Key기술을 적용하여 디바이스간 상호인증과 키 생성과 갱신 등의 시스템을 도입함으로서 다양한 보안위협에 대응할 수 있는 상호인증 방법에 대해 연구 하였다. 제안하는 프로토콜은 이기종간 보안 통신에 적용 가능하며, IoT 환경에서 잘 알려진 공격인 재사용 공격, 중간자 공격, 데이터 무결성 등에 안전함을 확인할 수 있었다.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.333-343
• /
• 2019

The possibility of adopting vibration-powered wireless nodes has been largely investigated in the last years. Among the available technologies based on the piezoelectric effect, the most common ones consist of a vibrating beam covered by electroactive layers. Another energy harvesting strategy is based on the use of piezoelectric strips attached to a hosting structure subjected to dynamic loads. The hosting structure, for example, can be the system to be equipped with wireless nodes. Such strategy has received few attentions so far and no analytical studies have been presented yet. Hence, the original contribution of the present paper is concerned with the development of analytical solutions for the electrodynamic analysis and design of piezoelectric polymeric strips attached to relatively large linear elastic structural systems subjected to random vibrations at the base. Specifically, it is assumed that the dynamics of the hosting structure is dominated by the fundamental vibration mode only, and thus it is reduced to a linear elastic single-degree-of-freedom system. On the other hand, the random excitation at the base of the hosting structure is simulated by filtering a white Gaussian noise through a linear second-order filter. The electromechanical force exerted by the polymeric strip is negligible compared with other forces generated by the large hosting structure to which it is attached. By assuming a simplified electrical interface, useful new exact analytical expressions are derived to assess the generated electric power and the integrity of the harvester as well as to facilitate its optimum design.

• 한국항행학회논문지
• /
• 제24권6호
• /
• pp.465-470
• /
• 2020

복합 소재는 금속보다 가벼운 특성을 가져 경량화가 필수인 항공 산업에 널리 사용되고 있다. 하지만 복합소재는 생산 공정 중 내부 보이드 형성, 접착제 혼합 불량, 미접착 부분 발생 등 결함 요소가 발생할 수 있고, 저 에너지 충격에 의한 미세균열 및 층간분리가 발생할 위험이 있다. 그러므로 구조물 손상검사가 필수적으로 요구된다. 이에 FBG를 이용한 구조 건전성 모니터링이 주목받고 있다. FBG는 기존의 전기적 센서에 비해 전기적 노이즈 영향을 받지 않고 부식에 강하며 멀티플렉싱이 가능하다는 장점이 있다. 하지만 FBG를 계측하는 인터로게이터는 대형 구조물 계측을 전제로 만들었기 때문에 가격이 고가이며, 크기가 큰 단점이 있다. 이에 본 논문에서는 광 스위치와 WDM필터, LTF를 이용해 무인항공기나 소형항공기에 사용할 수 있도록 저가형 인터로게이터를 설계하여, 기존의 고가 인터로게이터와 비교를 진행하였다.

• Ocean and Polar Research
• /
• 제44권1호
• /
• pp.13-27
• /
• 2022

The Yeongsan River estuary was altered by a sea dike built in 1981 and the sluice gates in the dike were extended recently in 2014. The construction has caused changes in water properties and hydrodynamics and also produced disturbances including hypoxia and algal blooms. We analyzed the water quality and chlorophyll-a data (2009-2018) collected seasonally at 3 stations (Sts. 1-3) along the channel of the estuary by the Marine Environmental Monitoring System. Variations in water quality and chlorophyll-a (an index of phytoplankton biomass) were examined and their stressors were also identified by statistics including correlation and multivariate principal component analyses (PCA). The water quality was mainly affected by freshwater discharge from the dike. Salinity, nutrients and chlorophyll-a were especially affected by the discharge and the effect enhanced during summer and at the upper region near the sea dike decreasing downstream. Three factors were extracted for each station in the PCA accounting for 66.07-72.42% of the variations. The first was an external factor associated with freshwater discharge and the second and third were seasonal or biological factors. The results indicate that the water quality is more affected by short-termed and episodic events such as freshwater discharge than seasonal events and the influence of freshwater discharge on water quality is more extensive than that previously reported. This suggests that the boundary of the estuary should be extended to take into account the findings of this study and a management strategy linked to the freshwater zone is required to manage the integrity and water quality of the Yeongsan River estuary.

• 품질경영학회지
• /
• 제51권1호
• /
• pp.67-78
• /
• 2023

Purpose: The purpose of this study is to investigate the COVID-19 pandemic-driven effect changes of quality factors on customer satisfaction in Korean Police Civil Affairs Service. Methods: This study fitted a regression model to the data collected by Korean National Police Agency from 2019 (before COVID-19 pandemic) to 2020 (during COVID-19 pandemic). In order to simultaneously estimate the effects of major seven quality factors on customer satisfaction for 'before the pandemic' and for 'during the pandemic', the regression model included not only customer satisfaction as the dependent variable, but also the fourteen independent variables consisting of the seven quality factors and their seven interaction terms. The interaction terms were defined by multiplying each quality factor by a dummy variable indicating either before or during the pandemic. Therefore, the coefficient estimates of the interaction terms indicate the changes of their corresponding quality factor effects on customer satisfaction between before and during the pandemic. The double bootstrap method was applied to test the significance of coefficient estimates. Results: Both before and during the pandemic, all quality factors had positive effects on customer satisfaction. However, these effects changed differently from before to during the pandemic: (increased) supportability, sincerity, and convenience; (decreased) integrity, professionalism, and fairness; (unchanged) promptness. Conclusion: This study found that the pandemic caused significant effect changes of quality factors on customer satisfaction in Korean Police Civil Affairs Service. This finding suggests the necessity of carefully monitoring such effect changes to effectively and efficiently improve customer satisfaction. This study also identified that from before to during the pandemic, supportability, sincerity, and convenience become more important and hence, need to be better managed.

• Composites Research
• /
• 제22권6호
• /
• pp.45-51
• /
• 2009

치아의 와동에 수복된 치과용 복합레진을 광(LED) 조사를 통해 경화 수축시키면서 음향방출(acoustic emission, AE)법을 이용하여 와동 벽면과 복합레진 사이의 계면상태를 실시간 해석하였다. 복합레진의 중합 수축에 의해 AE 신호들이 검출되었는데 계면 접착 상태가 나쁜 경우, 경화 수축률이 큰 초기 1분 동안 많은 AE 사상들이 관측되었으며, 이들 AE는 주파수범위가 주로 100-200kHz인 돌발형이었다. 인간치아 재질의 시편에서 발생된 AE 사상수는 스테인리스 스틸 시편보다 적었으나, PMMA 시편보다는 많았고 접착제의 도포 상태가 양호할수록 검출되는 AE 사상수는 적었다. AE 파라미터의 특성은 복합레진과 링재 사이의 접착부에서 발생하는 인장형 균열전파 및 복합레진의 수축에 따른 링재의 압축거동과 관련되었으며, 음향방출법이 치아 수복물의 접착성에 대한 비파괴 검사법으로써 유효함을 알았다.