• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2562-2568
• /
• 2015

This paper proposes a detection method for irregularity of ionospheric delay in network RTK (Real Time Kinematic) Environment. The linearity of network RTK correction provided to user can't be assured when a characteristic of temporal-spatial of ionospheric delay is rapidly changed due to geomagnetic storm or solar flare. Therefore, incorrect ambiguity can be resolved and positioning error can be increased. A detection method for irregularity of ionospheric delay is needed to provide reliable correction. In this paper, index to detect irregularity of ionospheric delay is calculated from dispersive corrections and occurrence of irregularity is judged by comparing index and thresholds.

• Structural Monitoring and Maintenance
• /
• v.2 no.3
• /
• pp.269-282
• /
• 2015

Civil structures should be designed with the lowest cost and longest lifetime possible and without service failure. The efficient and sustainable use of materials in building design and construction has always been at the forefront for civil engineers and environmentalists. Timber is one of the best contenders for these purposes particularly in terms of aesthetics; fire protection; strength-to-weight ratio; acoustic properties and seismic resistance. In recent years, timber has been used in commercial and taller buildings due to these significant advantages. It should be noted that, since the launch of the modern building standards and codes, a number of different structural systems have been developed to stabilise steel or concrete multistorey buildings, however, structural analysis of high-rise and multi-storey timber frame buildings subjected to lateral loads has not yet been fully understood. Additionally, timber degradation can occur as a result of biological decay of the elements and overloading that can result in structural damage. In such structures, the deficient members and joints require strengthening in order to satisfy new code requirements; determine acceptable level of safety; and avoid brittle failure following earthquake actions. This paper investigates performance assessment and damage assessment of older multi-storey timber buildings. One approach is to retrofit the beams in order to increase the ductility of the frame. Experimental studies indicate that Sprayed Fibre Reinforced Polymer (SFRP) repairing/retrofitting not only updates the integrity of the joint, but also increases its strength; stiffness; and ductility in such a way that the joint remains elastic. Non-linear finite element analysis ('pushover') is carried out to study the behaviour of the structure subjected to simulated gravity and lateral loads. A new global index is re-assessed for damage assessment of the plain and SFRP-retrofitted frames using capacity curves obtained from pushover analysis. This study shows that the proposed method is suitable for structural damage assessment of aged timber buildings. Also SFRP retrofitting can potentially improve the performance and load carrying capacity of the structure.

• Structural Monitoring and Maintenance
• /
• v.2 no.3
• /
• pp.283-300
• /
• 2015

Visual condition inspections remain paramount to assessing the current deterioration status of a bridge and assigning remediation or maintenance tasks so as to ensure the ongoing serviceability of the structure. However, in recent years, there has been an increasing backlog of maintenance activities. Existing research reveals that this is attributable to the labour-intensive, subjective and disruptive nature of the current bridge inspection method. Current processes ultimately require lane closures, traffic guidance schemes and inspection equipment. This not only increases the whole-of-life costs of the bridge, but also increases the risk to the travelling public as issues affecting the structural integrity may go unaddressed. As a tool for bridge condition inspections, Unmanned Aerial Vehicles (UAVs) or, drones, offer considerable potential, allowing a bridge to be visually assessed without the need for inspectors to walk across the deck or utilise under-bridge inspection units. With current inspection processes placing additional strain on the existing bridge maintenance resources, the technology has the potential to significantly reduce the overall inspection costs and disruption caused to the travelling public. In addition to this, the use of automated aerial image capture enables engineers to better understand a situation through the 3D spatial context offered by UAV systems. However, the use of UAV for bridge inspection involves a number of critical issues to be resolved, including stability and accuracy of control, and safety to people. SLAM (Simultaneous Localisation and Mapping) is a technique that could be used by a UAV to build a map of the bridge underneath, while simultaneously determining its location on the constructed map. While there are considerable economic and risk-related benefits created through introducing entirely new ways of inspecting bridges and visualising information, there also remain hindrances to the wider deployment of UAVs. This study is to provide a context for use of UAVs for conducting visual bridge inspections, in addition to addressing the obstacles that are required to be overcome in order for the technology to be integrated into current practice.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.155-164
• /
• 2006

VoIP technology is Eight New Services among Ubiquitous-IT839 strategies. This paper tested wiretapping or VoIP service in connected a soft phone and LAN and WAN sections, Internet telephones and a device. IP PBX, a banner operator network to have been connected to VoIP Internet network. As a result of having experimented on wiretapping of VoIP networks, Vulnerability was found. and a wiretapping by attacks of a hacker was succeeded in a terminal and proxy and attachment points of a VoIP network like a hub to follow a CVE list. Currently applied a security plan of an each wiretapping section in viewpoints of 6 security function of Access Control. Confidentiality, Authentication. Availability, Integrity. Non-repudiation in VoIP networks named to 070. Prevented wiretapping of contents by the results, the AES encryption that executed wiretapping experiment about a packet after application of a security plan. Prevented wiretapping, and kept security and audit log. and were able to accomplish VoIP information protection to network monitoring and audit log by an access interception and qualification and message hash functions and use of an incoming refusal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.303-309
• /
• 2018

Internet of Things technology is an intelligent service that connects all objects to the Internet and interacts with them. It is a technology that can be used in various fields, such as device management, process management, monitoring of restricted areas for industrial systems, as well as for navigation in military theaters of operation. However, because all devices are connected to the Internet, various attacks using security vulnerabilities can cause a variety of damage, such as economic loss, personal information leaks, and risks to life from vulnerability attacks against medical services or for military purposes. Therefore, in this paper, a mutual authentication method and a key-generation and update system are applied by applying S/Key technology based on a hash chain in the communications process. A mutual authentication method is studied, which can cope with various security threats. The proposed protocol can be applied to inter-peer security communications, and we confirm it is robust against replay attacks and man-in-the-middle attacks, providing data integrity against well-known attacks in the IoT environment.

• Smart Structures and Systems
• /
• v.24 no.3
• /
• pp.333-343
• /
• 2019

The possibility of adopting vibration-powered wireless nodes has been largely investigated in the last years. Among the available technologies based on the piezoelectric effect, the most common ones consist of a vibrating beam covered by electroactive layers. Another energy harvesting strategy is based on the use of piezoelectric strips attached to a hosting structure subjected to dynamic loads. The hosting structure, for example, can be the system to be equipped with wireless nodes. Such strategy has received few attentions so far and no analytical studies have been presented yet. Hence, the original contribution of the present paper is concerned with the development of analytical solutions for the electrodynamic analysis and design of piezoelectric polymeric strips attached to relatively large linear elastic structural systems subjected to random vibrations at the base. Specifically, it is assumed that the dynamics of the hosting structure is dominated by the fundamental vibration mode only, and thus it is reduced to a linear elastic single-degree-of-freedom system. On the other hand, the random excitation at the base of the hosting structure is simulated by filtering a white Gaussian noise through a linear second-order filter. The electromechanical force exerted by the polymeric strip is negligible compared with other forces generated by the large hosting structure to which it is attached. By assuming a simplified electrical interface, useful new exact analytical expressions are derived to assess the generated electric power and the integrity of the harvester as well as to facilitate its optimum design.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.465-470
• /
• 2020

Complex materials are widely used in aviation industries where lightweighting is essential because they have lighter properties than metals. However, composite materials can cause defects such as internal void formation, poor adhesive mixing, and non-adhesive parts during the production process, and there is a risk of micro-cracking and interlayer separation due to low energy impact. Therefore, a structural damage test is essential. As a result, structural integrity monitoring using FBG is drawing attention. Compared to conventional electrical sensors, FBG has the advantage of being more corrosion-resistant and multiplexed without being affected by electrical noise. However, interloggers measuring FBG are expensive and have a large disadvantage because they are made on the premise of measuring large structures. In this paper, low-cost interloggers were designed for use in unmanned or small aircraft using optical switche, WDM filter, and LTFs, and compared to conventional high-priced interrogator.

• Ocean and Polar Research
• /
• v.44 no.1
• /
• pp.13-27
• /
• 2022

The Yeongsan River estuary was altered by a sea dike built in 1981 and the sluice gates in the dike were extended recently in 2014. The construction has caused changes in water properties and hydrodynamics and also produced disturbances including hypoxia and algal blooms. We analyzed the water quality and chlorophyll-a data (2009-2018) collected seasonally at 3 stations (Sts. 1-3) along the channel of the estuary by the Marine Environmental Monitoring System. Variations in water quality and chlorophyll-a (an index of phytoplankton biomass) were examined and their stressors were also identified by statistics including correlation and multivariate principal component analyses (PCA). The water quality was mainly affected by freshwater discharge from the dike. Salinity, nutrients and chlorophyll-a were especially affected by the discharge and the effect enhanced during summer and at the upper region near the sea dike decreasing downstream. Three factors were extracted for each station in the PCA accounting for 66.07-72.42% of the variations. The first was an external factor associated with freshwater discharge and the second and third were seasonal or biological factors. The results indicate that the water quality is more affected by short-termed and episodic events such as freshwater discharge than seasonal events and the influence of freshwater discharge on water quality is more extensive than that previously reported. This suggests that the boundary of the estuary should be extended to take into account the findings of this study and a management strategy linked to the freshwater zone is required to manage the integrity and water quality of the Yeongsan River estuary.

• Journal of Korean Society for Quality Management
• /
• v.51 no.1
• /
• pp.67-78
• /
• 2023

Purpose: The purpose of this study is to investigate the COVID-19 pandemic-driven effect changes of quality factors on customer satisfaction in Korean Police Civil Affairs Service. Methods: This study fitted a regression model to the data collected by Korean National Police Agency from 2019 (before COVID-19 pandemic) to 2020 (during COVID-19 pandemic). In order to simultaneously estimate the effects of major seven quality factors on customer satisfaction for 'before the pandemic' and for 'during the pandemic', the regression model included not only customer satisfaction as the dependent variable, but also the fourteen independent variables consisting of the seven quality factors and their seven interaction terms. The interaction terms were defined by multiplying each quality factor by a dummy variable indicating either before or during the pandemic. Therefore, the coefficient estimates of the interaction terms indicate the changes of their corresponding quality factor effects on customer satisfaction between before and during the pandemic. The double bootstrap method was applied to test the significance of coefficient estimates. Results: Both before and during the pandemic, all quality factors had positive effects on customer satisfaction. However, these effects changed differently from before to during the pandemic: (increased) supportability, sincerity, and convenience; (decreased) integrity, professionalism, and fairness; (unchanged) promptness. Conclusion: This study found that the pandemic caused significant effect changes of quality factors on customer satisfaction in Korean Police Civil Affairs Service. This finding suggests the necessity of carefully monitoring such effect changes to effectively and efficiently improve customer satisfaction. This study also identified that from before to during the pandemic, supportability, sincerity, and convenience become more important and hence, need to be better managed.

• Composites Research
• /
• v.22 no.6
• /
• pp.45-51
• /
• 2009

The marginal integrity at the composite resin-tooth interface has been analyzed in real time through acoustic emission (AE) monitoring during the polymerization shrinkage of composite resin subjected to the light exposure. It was found that AE signals were generated by the polymerization shrinkage. Most AE hit events showed a blast type signal having the principal frequency band of 100-200kHz. Bad bonding states were indicated by many hit events in the initial curing period of 1 minute with high contraction rate. The quantity of hit events for the human molar dentin specimen was much less than that for the steel ring specimen but more than that for the PMMA ring specimen. The better the bonding state, the less the AE hit events. The AE characteristics were related with the tensile crack propagation occurring in the adhesive region between the composite resin and the ring substrate as well as the compressive behavior of the ring substrate, which could be used for a nondestructive characterization of the marginal disintegrative fracture of the dental restoration.