• Journal of Digital Contents Society
• /
• v.11 no.4
• /
• pp.579-588
• /
• 2010

Generalization of the web, development of one-person media such as the blog and mini homepage, and integration of video digital devices have generalized multimedia video services on the web. However, flash videos, the previously used bit map-based multimedia videos, exhibit problems like the waterfall phenomenon, lag phenomenon, or non-synchronization of audios or videos. Thereupon, This study is conducted to suggest a converting technique to provide efficient web video service on the web by solving problems of bitmap-based flash video through file format-converting software and movie editing programs. And this paper also conducts experiments on five videos for 13 CODECs and analyzes converted results comparatively. The recommendable method considering the characteristics of each videos is to utilize MainConcept H.264 Video CODEC using SWF2Video pro. The result of this research can be used to produce web videos on the web more effectively.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.35-40
• /
• 2013

The use of slurry with a mix of abrasives and coolant for making Wire Saw in the photovoltaic industry has sharply increased with the semiconductor wafer. In this paper, the slurry was isolated, purified and dried by microwave drying method with high-purity silicon carbide powder obtained through chemical processing. Dried slurry bulk was first pulverized and chemical treatment was applied to produce powder. The produced slurry powder was then analyzed by going through the following analysis; thermal analysis, particle size analyses: SEM shots, elemental analysis, XRF and XRD. The results of this study found the recovery rate of the power obtained though the chemical processing to be higher than the one obtained from mineral processing. The results anticipate infrastructure building and active responses to increasingly stronger domestic and international environmental regulations through the integration and recycling of large amounts of slurry in the photovoltaic industry.

• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.30-37
• /
• 2003

An expert system was developed for the stress diagnosis of cucumber and tomato using FoxPro. The principle points in building the system were integration with Korean, effective processing of mass information, and easy access for non-experts such as farmers. The method of inferencing was forward chaining based on pattern matching. Knowledge base was expressed with IF∼THEN rules and was expressed in the form of tree. Also, the expert system was designed so that additions and modifications of all information could easily be performed on windows. The results tested by farmers with the developed system showed that the expert system was reliable for the practical use. It was expected the expert system could be directly applied to the stress diagnosis of other vegetable plants by modifying only data bases.

• Journal of the Korean Society of Costume
• /
• v.61 no.8
• /
• pp.85-99
• /
• 2011

Geometrical figures have been used as artwork motifs from the ancient times to the present day. The area of fashion, being a part of modern art, is also largely influenced by geometry and geometrical shapes are being used as a motif for fashion design now more than ever before. However, studies about geometry in the fashion field are not yet done enough and further research is necessary. This research will therefore investigate the usages of round, square and triangular design in contemporary fashion. The main scope of this research is to look at the type of expression and analyze the intrinsic meanings of these shapes in modern fashion. This research will look profoundly into the general characteristics of these geometrical figures and analyze the effects and uniqueness found in the world collection introduced since 2007. As a result from this study, it was found that round and square objects were perceived in such a straightforward and positive way and these designs, when worn, really completed the final look. On the other hand, the triangular design was used mainly for spatial expansion and was interpreted in a more metaphorical, indirect and abstract way. The intrinsic meaning of round, square and triangle figures in contemporary fashion consists of the informal features that really steps out of the formative clothing structure. The topological changes that is formed from the interactive functions and the wholism that creates a new system through integration of the human body and clothing contains the intrinsic meaning of these geometrical figures. Based on the research results, the method of expression and the characteristics of modern day fashion's geometrical figures was able to be easily understood. This work provides the useful information on the development of fashion design and the extended interpretation of clothing structure.

• Structural Engineering and Mechanics
• /
• v.24 no.6
• /
• pp.709-725
• /
• 2006

In this paper the buckling and post-buckling behavior of slender bars under self-weight are studied. In order to study the post-buckling behavior of the bar, a geometrically exact formulation for the non-linear analysis of uni-directional structural elements is presented, considering arbitrary load distribution and boundary conditions. From this formulation one obtains a set of first-order coupled nonlinear equations which, together with the boundary conditions at the bar ends, form a two-point boundary value problem. This problem is solved by the simultaneous use of the Runge-Kutta integration scheme and the Newton-Raphson method. By virtue of a continuation algorithm, accurate solutions can be obtained for a variety of stability problems exhibiting either limit point or bifurcational-type buckling. Using this formulation, a detailed parametric analysis is conducted in order to study the buckling and post-buckling behavior of slender bars under self-weight, including the influence of boundary conditions on the stability and large deflection behavior of the bar. In order to evaluate the quality and accuracy of the results, an experimental analysis was conducted considering a clamped-free thin-walled metal bar. As this kind of structure presents a high index of slenderness, its answers could be affected by the introduction of conventional sensors. In this paper, an experimental methodology was developed, allowing the measurement of static or dynamic displacements without making contact with the structure, using digital image processing techniques. The proposed experimental procedure can be used to a wide class of problems involving large deflections and deformations. The experimental buckling and post-buckling behavior compared favorably with the theoretical and numerical results.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.15-25
• /
• 2018

Post-construction subgrade settlement especially differential settlement, has become a key issue in construction and operation of non-ballasted track on high-speed railway soil subgrade, which may also affect the dynamic performance of passing trains. To estimate the effect of differential subgrade settlement on the mechanical behaviors of the vehicle-slab track system, a detailed model considering nonlinear subgrade support and initial track state due to track self-weight is developed. Accordingly, analysis aiming at a typical high-speed vehicle coupled with a deteriorated slab track owing to differential subgrade settlement is carried out, in terms of two aspects: (i) determination of an initial mapping relationship between subgrade settlement and track deflections as well as contact state between track and subgrade based on a semi-analytical method; (ii) simulation of dynamic performance of the coupled system by employing a time integration approach. The investigation indicates that subgrade settlement results in additional track irregularity, and locally, the contact between the concrete track and the soil subgrade is prone to failure. Moreover, wheel-rail interaction is significantly exacerbated by the track degradation and abnormal responses occur as a result of the unsupported areas. Distributions of interlaminar contact forces in track system vary dramatically due to the combined effect of track deterioration and dynamic load. These may not only intensify the dynamic responses of the coupled system, but also have impacts on the long-term behavior of the track components.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.132-141
• /
• 2013

Robotic Drilling Systems(RDSs) set the standard for the factory automation systems in aerospace manufacturing. With the benefits of cost effective drilling and predictive maintenance, RDSs can provide greater flexibility in the manufacturing process. The system can be easily adopted to manage very complex and time-consuming processes, such as automated fastening hole drilling processes of large aircraft sections, where it would be difficult accomplished by workers following teaching or conventional guided methods. However, in order to build an RDS based on a CAD model, the precise calibration of the Tool Center Point(TCP) must be performed in order to define the relationships between the fastening-hole target and the End Effector(EEF). Based on the kinematics principle, the robot manipulator requires a new method to correct the 3D errors between the CAD model of the reference coordinate system and the actual measurements. The system can be called as a successful system if following conditions can be met; a. seamless integration of the industrial robot controller and the IO Level communication, b. performing pre-defined drilling procedures automatically. This study focuses on implementing a new technology called iGPS into the fastening-hole-drilling process, which is a critical process in aircraft manufacturing. The proposed system exhibits better than 100-micron 3D accuracy under the predefined working space. Based on the proposed EEF fastening-hole machining process, the corresponding processes and programs are developed, and its feasibility is studied.

• Clinical and Experimental Reproductive Medicine
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2014

Objective: Estrogen related receptor ${\beta}$ (Esrrb) is a member of the orphan nuclear receptors and may regulate the expression of pluripotencyrelated genes, such as Oct4 and Nanog. Therefore, in the present study, we have developed a method for delivering exogenous ESRRB recombinant protein into embryos by using cell-penetrating peptide (CPP) conjugation and have analyzed their effect on embryonic development. Methods: Mouse oocytes and embryos were obtained from superovulated mice. The expression of Oct4 mRNA and the cell number of inner cell mass (ICM) in the in vitro-derived and in vivo-derived blastocysts were first analyzed by real time-reverse transcription-polymerase chain reaction and differential staining. Then 8-cell embryos were cultured in KSOM media with or without $2{\mu}g/mL$ CPP-ESRRB protein for 24 to 48 hours, followed by checking their integration into embryos during in vitro culture by Western blot and immunocytochemistry. Results: Expression of Oct4 and the cell number of ICM were lower in the in vitro-derived blastocysts than in the in vivo-derived ones (p<0.05). In the blastocysts derived from the CPP-ESRRB-treated group, expression of Oct4 was greater than in the non-treated groups (p<0.05). Although no difference in embryonic development was observed between the treated and non-treated groups, the cell number of ICM was greater in the CPP-ESRRB-treated group. Conclusion: Treatment of CPP-ESRRB during cultivation could increase embryos' expression of Oct4 and the formation rate of the ICM in the blastocyst. Additionally, an exogenous delivery system of CPP-conjugated protein would be a useful tool for improving embryo culture systems.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.7
• /
• pp.109-116
• /
• 2010

In this paper, we analyse empirically the relation between the IT competency of the Group enterprises, and the management performance of the subsidiary IT service firms in Korea. The 24 IT service firms and relative Group enterprises are included for analysis. The various hypotheses established are validated by t-test method statistically. The results shows that IT competency level of the Group enterprises was affected by not only their sales volumes, new investment volume of IT service, but system management(SM) and inner captive market's sales volume of subsidiary IT service firms also. Additionally the sales volume of IT service firms was affected positively by their inner-captive market's sales, system management sales volume, and the sales volume of their Group enterprise. The service competency of the subsidiary IT service firms is shown as more high in the lower intensity of outer-captive and system integration(SI) business, as well as in the upper intensity of inner-captive and SI business.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.119-126
• /
• 1985

The productivity and growth pattern of Sargassum confusum (Phaeophyta, Sargassaceae) was investigated in Ohori, east coast of Korea, from March 1983 to April 1984. S. confusum shows an obvious seasonal variation of the growth by passing through the germinative, vegetative, reproductive and decaying phases for about an year. The mean length of tagged individuals shows a positive correlation with the water temperature during the growing period. The growth is depressed at less than 1$0^{\circ}C$ in February, and accelerated at above 15$^{\circ}C$ in May. The rapid growth (1.29 cm/dry) occurs at 15-l8$^{\circ}C$ during May-June and the maximum length is shown at 20-21$^{\circ}C$ in early August. Daily net production estimated by the oxygen light and dark bottle method is 11.2 g C/$m^2$/ day in June. The annual value calculated by the integration of the daily net production, growth rate and biomass is 745 gC/$m^2$/yr. Net production estimated from the biomass change only is 287 gC/$m^2$/yr. But this must be an underestimated value, because the loss of considerable biomass by shedding is not included.