• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.547-552
• /
• 2010

In this study, we suggested an integrated humidification system for a fuel cell electric vehicle (FCEV) as an efficient method of humidification under the various driving condition of the fuel cell vehicle and system. It is improving air humidification system combined the existing membrane humidifier and water injection. As a result, we verified it through experiments and the vehicle test and could get a result of improvement of humidification performance. The results show that an integrated humidification system is a useful method for FCEV applications.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.17-23
• /
• 2012

An integrated dynamic control (IDCF) with an active front steering system and an active rear braking system is proposed and developed in this study. A fuzzy logic controller is applied to calculate the desired additional steering angle and desired slip of the rear inner wheel. To validate IDCF system, an eight degree of freedom, nonlinear vehicle model and a sliding mode wheel slip controller are also designed. Various road conditions are used to test the performance. The results show that the yaw rate of IDCF vehicle followed the reference yaw rate and reduced the body slip angle, compared with uncontrolled vehicle. Thus, the IDCF vehicle had enhanced lateral stability and controllability.

• IE interfaces
• /
• v.16 no.3
• /
• pp.280-290
• /
• 2003

Many firms are trying to optimize their production and distribution functions separately, but possible savings by this approach may be limited. Nowadays, it is more important to analyze these two functions simultaneously by trading off the costs associated with the whole. In this paper, I treat a production and distribution planning problem for single-period inventory products comprised of a single production facility and multiple customers, with the aim of optimally coordinating important and interrelated decisions of production sequencing and vehicle routing. Then, I propose a hybrid genetic algorithm incorporating several local optimization techniques, HGAP, for integrated production-distribution planning. Computational results on test problems show that HGAP is effective and generates substantial cost savings over Hurter and Buer's decoupled planning approach in which vehicle routing is first developed and a production sequence is consequently derived. Especially, HGAP performs better on the problems where customers are dispersed with multi-item demand than on the problems where customers are divided into several zones based on single-item demand.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.65-70
• /
• 2014

An Integrated Dynamics Control system with four wheel Steering (IDCS) is proposed and analysed in this study. It integrates and controls steer angle of front and rear wheel simultaneously to enhance lateral stability and steerability. An active front steer (AFS) system and an active rear steer (ARS) system are also developed to compare their performances. The systems are evaluated during brake maneuver and several road conditions are used to test the performances. The results showed that IDCS vehicle follows the reference yaw rate and reduces side slip angle very well. AFS and ARS vehicles track the reference yaw rate but they can not reduce side slip angle. On split-${\mu}$ road, IDCS controller forces the vehicle to go straight ahead but AFS and ARS vehicles show lateral deviation from centerline.

• IE interfaces
• /
• v.5 no.2
• /
• pp.3-17
• /
• 1992

In this study, an integrated economic analysis model to analyze the new telecommunication services is developed. This model considers both the technological and managerial aspests altogether with respect to the profit and public benefit criteria. To encounter the various dynamically changing environments and evaluation criteria, multiple criteria decision making (MCDM)techniques are employed. The model consists of three stages; The first stage surveys related formal or informal data, generates analysis alternatives, and performs acceptabillty test in view of marketing. The second stage generates executive alternatives for each acceptable analysis alternative and checks the executionability in view of telecommunication technologies. The third stage performs the final integrated economic analysis including the profitability analysis. This study offers a basis for the future development of decision support system or expert system on the economic analysis of the new telecommunication services.

• Journal of Aerospace System Engineering
• /
• v.2 no.4
• /
• pp.13-18
• /
• 2008

Airworthiness is a term used to dictate whether an aircraft is worthy of safe flight. It is illegal in most countries to fly an aircraft without first obtaining an airworthiness certificate from the responsible government agency. For developing an aircraft, the design modifications and upgrades are considered a high financial risk proposal for most Program Managers(PMs). However Design-to-Certification Integrated System can be a great help in achieving a good design solution in an acceptable amount of time and flight test. In this paper, we present a method to construct database for the Development of Design-to-Certification Integrated System. By using this database, the human designer could manage and find the regulation and requirements related with his concern effectively.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.216-217
• /
• 2005

This paper presents an integrated navagation control concept for underwater vehicles under high speed navigation circumstance. First of all, in order to control an underwater vehicle with respect to automatic navigation, an integrated navigation control method is suggested in view of synchronous control for course keeping, diving and depth control. An exact nonlinear model equation with six-degree-of-freedom is derived for control algorithm. To identify various hydrodynamic coefficients of the equation, an experimental approach is introduced and results are demonstrated for MANTA type model.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.86-91
• /
• 2012

Door effort was calculated for a new door checker with torsion bar spring and integrated checker case by FE analysis. A hybrid checker arm which has peaks and valleys only on the upper surface was adopted to reduce noise in operation and make operation with more distinctive steps. The checker arm was modeled using shell elements to estimate both the longitudinal and the lateral resistance force by checker arm. By combining the checker arm resistance force obtained from analysis and the door self-closing force by the theoretical calculation, door effort was predicted to show the good correlation with test results. In addition the unrolling effect of roller model was investigated and a new roller type for more smooth rolling was studied.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.2
• /
• pp.26-32
• /
• 2017

This paper presents the lateral stability criteria for integrated chassis control. To determine the intervention timing of chassis control system, the lateral stability criteria is needed. The proposed lateral stability criteria is based on velocity-yawrate gain domain to determine whether vehicle is stable. If the yawrate gain violates the proposed criteria, the stability of the vehicle is considered as unstable. Characteristic velocity and critical velocity are employed to distinguish lateral stability criteria. The inside of the two boundaries is stable and the outside is unstable. If yawrate gain of vehicle violates the lateral stability criteria, the chassis control begin to intervene. To validate the lateral stability criteria, both computer simulations and vehicle test are conducted with respect to circular turn scenario. The proposed lateral stability criteria makes it possible to reduce intervention of chassis control system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.356-359
• /
• 2007

Continuing improvements in integrated circuit chip density and functionality have mostly contributed toward a very large-scale integrated circuit(VLSI) and display device. In order to test (pass or fail) all of the high integrated semiconductor chip and display device, fine pitch probes are used. Fine pitch probes are manufactured by electroforming process of a Ni alloy in an electrolytic bath. In this paper, we expect that the electric field in bath with the Finite Element Method and applying the FEM result. So, we can obtained the probes that have high aspect ratio of 10 : 1