• 산업경영시스템학회지
• /
• 제37권2호
• /
• pp.1-8
• /
• 2014

The automobile manufacture is a typical integrated assembly production that the numerous parts are committed sequentially to the assembly line. In this type of automobile manufacture, WBS (white body storage) and PBS (paint body storage) are operated to adjust the production sequence and to buffer. Starvation (impossibility of production owing to the insufficient supply) or blocking (impossibility of production owing to the over capacity) could occur in some chance, hence, both storages (WBS, PBS) are integrated as a prevention. This system is called integrated storage. In this paper, we suggest the simulation model of 'WBS-PBS integrated storage' and methodology of operation considering both 'Color grouping' and 'Option leveling.'

• 한국시뮬레이션학회논문지
• /
• 제21권2호
• /
• pp.91-101
• /
• 2012

자동차 생산라인은 차체라인, 도장라인, 의장라인으로 구성된다. 이러한 생산라인들은 직렬로 배치되어 흐름생산을 거치기 때문에 전후 공정의 상태에 따라 라인에서는 starvation(물량 부족으로 인한 생산 불가능) 또는 blocking(용량 초과로 인한 생산 불가능)으로 인한 정지가 발생한다. 이에 starvation이나 blocking으로 오는 생산 손실을 막기 위해 WBS, PBS와 같은 창고를 개별적으로 보유하여 운영된다. 본 논문은 라인의 버퍼역할을 하는 각 창고들을 통합하여 운영할 수 있는 통합창고 시뮬레이션 모형을 제안한다. 적정 Stacker Crane 대수와 AGV 대수를 구하고, 이를 운영할 수 있는 운영방법론을 제안한다. 또한 개별창고와 통합창고 모형을 시뮬레이션을 이용하여 효율성 비교를 한다.

• 한국가스학회지
• /
• 제9권1호
• /
• pp.44-50
• /
• 2005

본 논문에서는 LNG저장탱크의 통압제어 안전관리 시스템에 대한 연구결과를 제시하고 있다. 통합제어 및 안전관리를 효과적으로 진행하기 위한 새로운 통합관리 시스템은 내부탱크로부터 유출되는 가스나 초저온 액체(LNG)에 의한 안전성과 누출문제를 제어하기 위해 온도, 압력, 진동과 같은 신호를 검지하고, 종합적으로 분석하여 시스템의 안전성을 확보할 수 있도록 개발된 것이다. 효율성과 안전성 향상측면에서 LNG저장탱크의 저장용량 증가경향과 최근에 발생된 저장탱크의 고장사례 고찰을 통하여, 기존의 측정장치와 안전장치는 개량되고, 새로운 기술개발이 필요하다는 것을 강조한다. 따라서 본 연구에서는 초대형 LNG저장탱크의 제어와 안전관리를 위해 새로이 개발된 통합제어 안전관리 시스템을 제시하고 있다. 이 시스템에서는 기존의 측정 및 안전장치에 대한 통합과 연계성 및 성능을 향상시키고, 특히 저장탱크 구조물의 변위량을 측정하여 안전성을 확보할 수 있도록 기능성을 새로이 추가하였다. 본 연구에서 개발된 통합제어 안전관리 시스템에 프로세스 통합관리 시스템(PIIS)을 연계하여 사용한다면, LNG 저장탱크의 안전성, 효율성, 생산성은 획기적으로 향상될 것이다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.300-303
• /
• 2008

The stratification effect was investigated with four different types of diffuser shape in a thermal storage tank. For this study, experimental facility was constructed, which was composed of experimental thermal storage tank, hot and cold water storage tanks, boiler, chiller, data acquisition system, etc.. Visualization and lab scale experimental result showed that radial curved type diffuser was the highest degree of stratification among the four diffuser shapes.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권1호
• /
• pp.1-7
• /
• 2018

Objective signs are everywhere that the stationary energy storage market is growing up quickly. The use of distributed resources such as solar photovoltaics and electric vehicles are expanding at a rapid pace, creating technical challenges for the distribution system that will require energy storage and a new generation of software to address. This paper is intended for distribution utility managers and executives and makes the following points: ${\bullet}$ Utility-integrated (as opposed to merely grid-connected) energy storage projects represent a distinct, new wave of industry growth that is just getting underway and is required to manage distributed energy resources moving forward. ${\bullet}$ Utilities and the energy storage industry have important roles to lower risk in adopting this technology - thereby enabling this wave of growth. ${\circ}$ The industry must focus on engineering energy storage for adoption at scale - including the creation and support of software open standards -both to drive down costs and to limit technology and supplier risk for utilities. ${\circ}$ Utilities need to take a program-based, rather than a project- based, approach to this resource to best balance cost and risk as they procure and implement energy storage. By working together to drive down costs and manage risk, utilities and their suppliers can lay the energy storage foundation for a new, more digital distributed electricity system.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.335-342
• /
• 2016

This paper proposes an energy storage-assisted, series-connected module-integrated power conversion system that integrates a photovoltaic power conditioner and a charge balancing circuit. In conventional methods, a photovoltaic power conditioner and a cell-balancing circuit are needed for photovoltaic systems with energy storage devices, but they cause a complex configuration and high cost. Moreover, an imbalanced output voltage of the module-integrated converter for PV panels can be a result of partial shading. Partial shading can lead to the fault condition of the boost converter in shaded modules and high voltage stresses on the devices in other modules. To overcome these problems, a bidirectional buck-boost converter with an integrated magnetic device operating for a charge-balancing circuit is proposed. The proposed circuit has multiple secondary rectifiers with inductors sharing a single magnetic core, which works as an inductor for the main bidirectional charger/discharger of the energy storage. The secondary rectifiers operate as a cell-balancing circuit for both energy storage and the series-connected multiple outputs of the module-integrated converter. The operating principle of the cell-balancing power conversion circuit and the power stage design are presented and validated by PSIM simulation for analysis. A hardware prototype with equivalent photovoltaic modules is implemented for verification. The results verify that the modularized photovoltaic power conversion system in the output series with an energy storage successfully works with the proposed low-cost bidirectional buck-boost converter comprising a single magnetic device.

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.664-673
• /
• 2021

This study aimed to investigate the influence of Astragalus membranaceus (AM), Adenophora triphylla (AT), and Ulmus pumila (UP) extracts on the quality traits, palatability, and storage stability of sous-vide (SV) cooked chicken breasts. Chicken breasts were marinated in AM, AT, or UP extracts for 1 h, and then consistently cooked at a constant temperature of 60℃ for 2 h. SV cooked chicken breasts with the UP extract exhibited lower lightness and higher yellowness values on the surface region compared to those with the AM and AT extracts (p<0.05). The control and UP groups displayed a similar overall visual acceptability (p>0.05), although the UP group had lower color acceptability (p<0.01). The UP group also had higher flavor and lower off-flavor intensities compared to the control group (p<0.05), although similar scores were observed in tenderness attributes and juiciness among the groups (p>0.05). Owing to these results regarding overall sensory acceptability, samples from the UP group were more preferred by the trained panelists compared to samples from the control group (p<0.001). On 14 d of cold storage, all the groups with herbal medicinal extracts exhibited a lower concentration of thiobarbituric acid-reactive substances than the control group (p<0.05), and the AT and UP groups showed lower values compared to the AM group due to their higher flavonoid contents (p<0.001). Therefore, meat marination with herbal plant extracts before SV cooking can be effective for enhancing the overall quality of SV cooked chicken breast.

• 인지과학
• /
• 제35권1호
• /
• pp.1-21
• /
• 2024

본 연구는 두 가지 이론적 모델인 통합된 객체 모형과 특장 병렬-독립 저장 모형을 검증함으로써 시각작업기억 표상의 특성을 조사하였다. 실험 I에서 참가자들은 색상 사각형, 방위 막대 또는 두 가지 모두로 구성된 배열을 기억한 뒤 이를 토대로 변화탐지과제를 수행했다. 단일 특징 조건에서 기억배열은 하나의 특징(방위 또는 색상)으로만 구성된 반면, 두 가지 특징 조건은 둘 모두를 포함했다. 두 조건간 변화탐지 수행의 차이는 없었으며 이는 병렬-독립 저장 모형보다는 통합된 객체 모형을 지지한다. 실험 II에서는 이등변삼각형의 방위, 색상 사각형 또는 두 특징 모두로 구성된 기억배열을 대상으로 회상과제가 실시되었으며, 단일 특징과 두 가지 특징 조건 간 회상 수행이 비교되었다. 두 조건 간 회상 정확도에는 차이가 없었으나 표상 선명도와 추측반응에 대한 분석 결과는 강한 객체 모형보다는 약한 객체 모형을 시사했다. 본 연구의 결과는 시각작업기억의 표상 특성을 둘러싼 현시점의 논쟁에 있어서 병렬-독립 저장 모형이 아닌 통합된 객체 모형의 우세를 지지한다.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.47-53
• /
• 2007

In this paper, a thermo-piezoelectric mechanism with integrated heaters and piezoelectric sensors has been studied for low power probe-based data storage. Silicon nitride cantilever integrated with silicon heater and piezoelectric sensor has been developed to improve the uniformity of cantilevers. Data bits of 40 nm in diameter were recorded on PMMA film. The sensitivity of the piezoelectric sensor was 0.615 fC/nm after poling the PZT layer. And, the $34\times34$ probe array integrated with CMOS circuits has been successfully developed by simple one-step bonding process. The process can simplify the process step and reduce tip wear using silicon nitride tip.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4125-4133
• /
• 2023

The transportation of spent nuclear fuel is an important process that involves road and sea transport from an interim storage facility to storage and final disposal sites. As spent nuclear fuel poses a significant risk, carefully evaluating its vibration and shock characteristics under normal transport conditions is essential. In this regard, full-scale multi-modal transport tests (MMTT) have been conducted domestically and internationally. In this paper, we discuss the process of developing a multi-body dynamics (MBD) model to analytically simulate conditions that cannot be considered in tests. The MBD model is based on the KORAD-21 transportation system was validated using the Korean MMTT results from 2020 to 2021. This paper summarizes the details of the development and verification of the MBD model for the KORAD-21 transportation system under normal transport test conditions. This approach can be applicable to various transportation scenarios and systems, and the results of this study will help to ensure that nuclear fuel transportation is conducted safely and effectively.