• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1243-1246
• /
• 2006

A new source follower circuit for the integrated circuit of AMLCDs is proposed. Active load is added and calibration operation is applied to compensate the circuits. Proposed circuit is capable of minimizing the variation from both timing and device variations through measured results, the uniformity and bias effect are discussed.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.3
• /
• pp.180-185
• /
• 2005

Microstrip antennas generally have a lot of advantages that are thin profile, lightweight, low cost, and conformability to a shaped surface application with integrated circuitry. In addition to military applications, they have become attractive candidates in a variety of commercial applications such as mobile satellite communications, the direct broadcast system (DBS), global positioning system (GPS), and remote sensing. Recently, many of the researches have been achieved for improving the impedance bandwidth of microstrip antennas. The basic form of the microstrip antenna, consisting of a conducting patch printed on a grounded substrate, has an impedance bandwidth of $1\~2\%$. For improvement of narrow bandwidth of microstrip patch, we were designed U-slot microstrip patch antenna in this paper. This antenna had wide bandwidth for all personal communication services (PCS) and IMT-2000. For the design of U-slot microstrip patch antenna using a finite difference time domain(FDTD) method. This numerical method could get the frequency property of U-slot patch antenna and the electromagnetic fields of slots.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.479-485
• /
• 2002

We propose a vector analysis for designing multimode-interference power splitters, which can show an arbitrary splitting ratio. Power splitting is a fundamental characteristic in integrated optical circuits and its value would be multiplied for many applications if the splitting ratio could be selected freely. Since the vector analysis utilizes a graphical method based on the previously-reported mathematical results of multimode interference, it shows an excellent advantage especially for designing power splitters with an arbitrary splitting ratio.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.156-157
• /
• 2001

전계 흡수 광 변조기는 우수한 소광비와 낮은 전력 소모로 넓은 대역폭을 확보할 수 있으며 LD와의 단일 집적인 EML(electro-absorption modulator integrated laser diode)의 제작도 용이하므로 Microwave-Photonics 시스템에 매우 적합한 소자로써 근래에 활발한 연구가 진행되어지고 있다. 전계 흡수 광 변조기의 대역폭을 최대한 확보하기 위해서는 진행하는 마이크로파의 위상속도와 광파의 그룹 속도가 정합 되어야 하며 소자의 임피던스가 50Ω에 정합 되어야 한다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.225-234
• /
• 2005

In the integral imaging system for 3D display, the elemental image size is closely related to the several variables, such as the size of elemental lens, the distance between elemental lens and elemental image, etc., on the pick up system. We have analyzed the geometric relation between the variables. In addition, we have investigated the integrated image variation for the individual and whole conversion of the size of the elemental images, different from in pick up process, and presented experimental results.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.25-31
• /
• 2016

We derive 28 optical structural equations based on our two previous theoretical and experimental papers about a gigapixel camera, which were published in 2013 and 2015 respectively. Utilizing these 28 equations, we are able to obtain an integrated understanding of optical structure for a multiscale gigapixel camera system, in addition to obtaining numerical values for structural parameters very directly and easily.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.293-294
• /
• 2008

Using bi-direction SOA based Extension system, FTTH can enhance PON system by increasing both the upstream and downstream link budget. This increased link budget can be used to extend the distance, increase the split ratio or both. The bi-direction SOA regenerates signals using all-optical amplification, and is therefore transparent to data rate or protocol. The bi-direction SOA supports legacy as well as future FTTx standards. This is based on SOA's proprietary technology platform for the manufacturing of advanced discrete photonics and photonic integrated circuits (PICs). Because the bi-direction SOA uses the same InP semiconductor technology used in virtually all telecom lasers, it is able to amplify signals at 1310 and 1490 nm, wavelengths not accessible with commercial fiber-amplifier (EDFA) technology. Due to the extremely fast response time of the InP semiconductor optical amplifiers inside, the SOA can accommodate both continuous (downstream) and bursty (upstream) traffic.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.226-231
• /
• 2007

In this paper, we analyze the characteristics of various curved waveguides composed of double metal strips using finite difference method (FDM). Our investigation reveals that the bending loss of the double metal strip waveguide can be improved with less degradation of the straight waveguide's propagation loss compared to the single metal strip structure. Optimization of the double metal strip waveguide structure has been conducted considering bending and propagation losses.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.223-239
• /
• 1990

This paper presents an overview on the present status and future trends of photonic physics and engineering as applicable to optical materials and devices that would enable optical information processing and optical commmication technologies of the future. Covered subjects include semiconductor quantum devices, organic materials, photorefractive physics, quantum effect, non-linear processing optical amplification, memory, integrated optics, and applications in all-optical communications and processing, including photonic switching.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.22-26
• /
• 2019

A compact red-green-blue beam combiner (multiplexer) based on two-mode interference (TMI) is proposed and its feasibility is shown through three-dimensional beam propagation simulation. The first stage TMI beam combiner makes red (637 nm) and blue (446 nm) beams combined toward one output port and the second stage one combines red, blue, and green (532 nm) beams. The power transmission to the output port from the red, green, and blue input ports are 0.96, 0.99, and 0.98, respectively. When the wavelength deviation is 10 nm, the transmission is maintained to be larger than 0.9. The size of the combiner is as tiny as $0.02{\times}3.8mm^2$.