• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.146-151
• /
• 2002

Efficiency of dredging work depends on the types of equipment used, the sediments encountered, whether the work to be performed is new or for maintenance, pre and/or post hydrographic surveying and so forth. Among those, surveying accuracy which is directly determined by the control of the dredge's position and depth surveying accuracy being surveyed at the dredging point are important factors. The purpose of this study is to develop an integrated process management system for pump dredge. The system is composed of 4 sub-systems such as LADGPS for dredge positioning dredging point determination, tidal gauge and angular depth sensor for depth determination, and GIS and ENC process management. The process management system for pump dredge developed was installed on the pump dredge "EUNJIN PD-2" but is now producing work data for comparison with performance of the existing dredge. The data retrieved from the pump dredge process management system up to now shows similar result from the grab dredge management system which was developed previously. It is easy to operate, achieves good accuracy with only 45cm unevenness, reduces working perioa by 20 percint,. More precise evaluation of the system comes later after the dredging work is completed.completed.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.395-400
• /
• 2017

As a serial communications protocol, Modbus has become a practically standard communication protocol and is now a commonly available means of connecting industrial electronic devices. Therefore, all devices can be connected using the Modbus protocol with the measurement and remote control on ships, buildings, trains, airplanes and more. The existing Modbus that has been used is based on serial communication. Modbus TCP uses Ethernet communication based on TCP / IP which is the most widely used Internet protocol today; so, it is faster than serial communication and can be connected to the Internet of Things. In this paper, we designed an algorithm to control LED lighting in a wireless Wi-Fi environment using the Modbus TCP communication protocol, and designed and implemented a LED controller circuit that can check external environmental factors and control remotely through the integrated management system of a ship. Temperature, humidity, current and illuminance values, which are external environmental factors, are received by the controller through the sensors, and these values are communicated to the ship's integrated management system via the Modbus protocol. The Modbus can be connected to Master devices via TCP communication to monitor temperature, humidity, current, illuminance status and LED output values, and also users can change the RGB value remotely in order to change to the desired color. In addition, in order to confirm the implementation of the controller, we developed a simulated ship management system to monitor the temperature, humidity, current and illumination conditions, and change the LED color of the controller by changing the RGB value remotely.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.363-369
• /
• 2021

In this paper, We propose variable cut-off frequency and variable sample rate small-area multi-channel digital filter for telemetry system. Proposed digital filter reduced hardware area by implementing filter banks that can variably use cut-off frequency and sample rate without additional filter banks for an arbitrary cut ratio. In addition, We propose the architecture in which sample rate can variably be selected according to the number of filters that pass through the multiplexer control. By using time division multiplexing (TDM) supported by the finite impulse response (FIR) intellectual property (IP) of Quartus, the proposed digital filter can greatly reduce digital signal processing (DSP) blocks from 80 to 1 compared without TDM. Proposed digital filter calculated order and coefficients using Kaiser window function in Matlab, and implemented using very high speed integrated circuits hardware descryption language (VHDL). After applying to the telemetry system, we confirmed that the proposed digital filter was operating through the experimental results in the test environment.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1092-1100
• /
• 2012

In this paper, it has designed and developed the integrated aural cueing system(ACS) system of the reconfigurable tactical Flight Training System(RTT) for the 6 rotorcraft such as UH-1H, UH-60, AH-1H, 500MD, BO-100, and CH-47. RTT is an evolving alternative instructional training system to provide the ability to rehearsal and collectively train, through networked simulators in a unit-collective and combined arms simulated battlefield environment. ACS handles the volume, pitch and repetition of the digitally stored sounds based on commands it receives from the Host server. This paper explained and implemented the conceptual and detail design the ACS system. In order to evaluating the performance of the ACS system, we made the monitoring system for interworking the virtual Host and the ACS system. As the result, it was confirmed the good performance.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1080-1091
• /
• 2012

Information system for audit target that was done in the past business unit system presided over the development process for an integrated information system in three steps further from the audit step 2 step-by-doing, for in the presiding quality party check for the information systems audit requirements of social responsibility is growing. Therefore, efforts are needed for research on factors affecting the quality of the audit and audit improve the quality in order to improve the quality of the Methodist This study, the general auditor competence and supervision, empowerment and the causal relationship between the quality of service, presided over by a model that can be analyzed in the field to develop and take advantage of the auditor's general theory of leadership was developed from existing research capabilities identification and analysis on a supervisor's empowerment survey conducted for the auditor to perform Methodist, its contents and using the LISREL structural equation methods were empirically tested.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.184-191
• /
• 2020

Avionics System Integration Laboratory is the integrated test environment for integration and verification of avionics systems. When real equipment can not be used in the laboratory for various reasons, software models should be needed. Because there hasn't been any standardized method for the models so that it is difficult to reuse the developed models, the need for a framework to develop the avionics software models was emerged. We adopted DEVS(discrete event system specification) formalism as the standardized modeling method for the avionics software models. Due to DEVS formalism is based on event-driven algorithm, it doesn't accord a legacy system which has sequential and periodic algorithms. In this paper, we propose real-time event-driven modeling and simulation method for SIL to overcome these restrictions and to maximize reusability of avionics models through the analysis of the characteristics and the limitations of avionics models.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.2
• /
• pp.67-72
• /
• 2015

Power grid techniques are distributed over general power systems ranging from power stations to power transmission, power distribution, and users. To monitor and control the elements and performance of a power system in real time in the extensive area of power generation, power transmission, wide-area monitoring (WAM) and control techniques are required (Sattinger et al. 2007). Also, to efficiently operate a power grid, integrated techniques of information and communication technology are required for the application of communication network and relevant equipment, computing, and system control software. WAM should make a precise power grid measurement of more than once per cycle by time synchronization using GPS. By collecting the measurement values of a power grid from substations located at faraway regions through remote communication, the current status of the entire power grid system can be examined. However, for GPS that is used in general national industries, unexpected dangerous situations have occurred due to its deterioration and jamming. Currently, the power grid is based on a synchronization system using GPS. Thus, interruption of the time synchronization system of the power system due to the failure or abnormal condition of GPS would have enormous effects on each field such as economy, security, and the lives of the public due to the destruction of the synchronization system of the national power grid. Developed countries have an emergency substitute system in preparation for this abnormal situation of GPS. Therefore, in Korea, a system that is used to prepare for the interruption of GPS reception should also be established on a long-term basis; but prior to this, it is required that an evaluation technique for the time synchronization performance of a GPS receiver using an atomic clock within the power grid. In this study, a monitoring system of time synchronization based on GPS at a power grid was implemented, and the results were presented.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.329-335
• /
• 2016

Unmanned aircraft systems (UAS) are defined as the system whose components include the necessary equipment, network, and personnel to control an unmanned aircraft. In the past, UAS were predominately operated for military operations. However, nowadays, the applications of UAS to commercial area are explosively augmented and UAS are being expected to be integrated in national airspace. Therefore, the need for the standardized datalink systems rapidly and the development of control and non-payload communication (CNPC) system are being processed for integration in national airspace in United States and Europe. In this paper, the technology trends for UAS CNPC datalink are explained and presented the performance evaluation results for CNPC system, which is the modified version of IEEE 802.15.4 ZigBee system.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.494-500
• /
• 2014

Recently the leak of personal information from in-house and contract-managed companies has been continually increasing, which leads a regular observation on outsourcing companies that perform the personal information management system to prevent dangers from the leakage, stolen and loss of personal information. However, analyzing many numbers of computers in limited time has found few difficulties in some circumstances-such as outsourcing companies that own computers that have personal information system or task continuities that being related to company's profits. For the reason, it is necessary to select an object of examination through identifying a high-risk of personal data leak. In this paper, this study will formulate a proposal for the selection of high-risk subjects, which is based on the user interface, by digital forensic. The study designs the integrated analysis tool and demonstrates the effects of the tool through the test results.

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.717-723
• /
• 2007

In recent years, the transportation sector has been undergoing very rapid and multifarious changes due to the M&A, alliances between shipping companies, introduction of larger container ship as it cost reduction measure and the application of integrated logistics to satisfy the needs of customers. Therefore, container terminal is required adequate terminal facilities, sufficient channel depth, efficient handling and low cost of port fees and dues. The purpose of this paper is for functional assessment of efficient container terminal. Firstly, the container operating process information about yard equipment and chassis is extracted through the analysis of practical daily work report of container terminal. Also, the formulae of skill factor and troubles of operator on transfer crane are defined. Lastly, container handling simulation model which consideration of skill factor and trouble of operator is proposed by Petri network model.