• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2010

Electronic Navigational Charts(ENCs) are a database for the use of supporting the safety of navigation in marie voyage embedded within the navigational information in the Electronic Chart Display & Information System(ECDIS). Recently IMO made a decision on the mandatory equipment resolution of ECDIS for the international SOLAS vessels until 2018. With this regulation intention together the spontaneous uses from the wide range of marine applications are accelerating the increasing demand for ENCs at both of the navigational purpose and the non-navigational purpose. But there seems to be not enough guidelines or systematic approach for the service of the non navigational purpose. This paper deals with ENCs distribution issues. We present a integrated solution for the ENCs service of both user domains and also demonstrate the implemented results.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.470-478
• /
• 2019

Because the global positioning system (GPS) is not available in underwater environments, an inertial navigation system (INS)/doppler velocity log (DVL) integrated navigation system is generally implemented. In general, an INS/DVL integrated system adopts a loosely coupled method. However, in this loosely coupled method, although the measurement equation for the filter design is simple, the velocity of the body frame cannot be accurately measured if even one of the DVL transducer signals is not received. In contrast, even if only one or two velocities are measured by the DVL transducers, the tightly coupled method can utilize them as measurements and suppress the error increase of the INS. In this paper, a filter was designed to regenerate the measurements of failed transducers by taking advantage of the tightly coupled method. The regenerated measurements were the normal DVL transducer measurements and the estimated velocity in RPM. In order to effectively estimate the velocity in RPM, a filter was designed considering the effects of the tide. The proposed filter does not switch all of the measurements to RPM if the DVL transducer fails, but only switches information from the failed transducer. In this case, the filter has the advantage of being able to be used as a measurement while continuously estimating the RPM error state. A Monte Carlo simulation was used to determine the performance of the proposed filters, and the scope of the analysis was shown by the standard deviation ($1{\sigma}$, 68%). Finally, the performance of the proposed filter was verified by comparison with the conventional tightly coupled method.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.492-498
• /
• 2015

With the rapid growth of technologies and demand of remotely piloted aircraft systems (RPASs), integration of such systems into the existing airspace is becoming an issue in many countries. To assess the impact of integrated operations of manned and remotely piloted aircraft (RPA), it is necessary to perform Human-in-The-Loop (HiTL) simulations of likely situations with an integrated simulation system. This paper defines several operational concepts for the integrated simulation. Several probable scenarios were developed including a traffic pattern at a small airport and an altitude maneuver at a route crossing. HiTL simulations were performed according to the developed scenarios. The simulation results are analyzed focusing on the impacts of different communication, safety, performance, and human machine interface (HMI) characteristics of RPA.

• Journal of Advanced Navigation Technology
• /
• v.2 no.2
• /
• pp.75-83
• /
• 1998

This paper presents a low cost and high accuracy integrated Global Positioning System (GPS)/dead reckoning (DR) system. The integrated GPS/DR system is capable of providing highly accurate position data in real-time or in post processing. Based on the analysis of the main error source affecting the DR measurements, an eight-state mathematical model for the integrated system has been developed to represent these errors. This eight-state model has been used to build a nonlinear filter for the estimation of the state vector at every epoch when DR measurements are available. The accuracy of the system has been evaluated using 1Hz DR measurements and 3Hz continuous GPS position estimates. Through numerical simulation the system performance during periods with GPS outage has been investigated by comparing two different noise models. While one model is the position estimation filter containing a single noise model, the other filter includes two-level noise model. The simulation results have shown that the estimation filter containing two-level noise model for computing the position error of the integrated GPS/DR system yields better performance than that the filter including the single-level noise model does.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.169-170
• /
• 2020

Although Busan Port is a world-class transshipment port, it is geographically divided and, despite the continuous increase in transshipment volume, ITT port integrated operation is not being performed, reducing port operation efficiency. In addition, the operation raises the problem of inefficiency in social and economic aspects, along with an increase in the volume of transshipment transport and the resulting increase in transshipment transport costs. This paper deals with the necessity of forming an integrated operation organization to carry out the ITT joint dispatch in the process of improving the ITT efficiency in Busan Port, and the organization structure centering on the transport companies and freight owners performing the Busan Port ITT. We intend to make a proposal for the establishment of an integrated operation organization in the form of a consortium and support plans. In addition, through analysis of implications, the role of the ITT stakeholders in Busan Port and related organizations will be addressed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.274-276
• /
• 2017

Korean e-Navigation is a system that introduced to reduce maritime accidents. In order to reduce marine accidents, Korean e-Navigation provides the following services-"Vulnerable Vessel Monitoring", "Vulnerable Vessel support & monitoring", "Optimal safety route", "ENC Streaming for Small Vessel", "Tug & Barge Support", "Maritime Safety Information Providing". Each Service is a system separated into finctional units and integrated into Korean e-Navigation. Korean e-Navigation is introducing data middleware to integrate each service and the DDS(Data Distribution Service) is judged to be effective. Thus, this paper analyzed the characteristics of DDS middleware types suitable for each service of e-Navigation.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.423-429
• /
• 2008

This study was performed to investigate the effects of inertial navigation system (INS) / global positioning system (GPS) sensor fusion for agricultural vehicle navigation. An extended Kalman filter algorithm was adopted for INS/GPS sensor fusion in an integrated mode, and the vehicle dynamic model was used instead of the navigation state error model. The INS/GPS system was consisted of a low-cost gyroscope, an odometer and a GPS receiver, and its performance was tested through computer simulations. When measurement noises of GPS receiver were 10, 1.0, 0.5, and 0.2 m ($1{\sigma}$), RMS position and heading errors of INS/GPS system at 5 m/s straight path were remarkably reduced with 10%, 35%, 40%, and 60% of those obtained from the GPS receiver, respectively. The decrease of position and heading errors by using INS/GPS rather than stand-alone GPS can provide more stable steering of agricultural equipments. Therefore, the low-cost INS/GPS system using the extended Kalman filter algorithm may enable the self-autonomous navigation to meet required performance like stable steering or more less position errors even in slow-speed operation.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.59-67
• /
• 2008

The necessity for the precise time synchronization of measurement data from multiple sensors is widely recognized in the field of global positioning system/inertial navigation system (GPS/INS) integration. Having precise time synchronization is critical for achieving high data fusion performance. The limitations and advantages of various time synchronization scenarios and existing solutions are investigated in this paper. A criterion for evaluating synchronization accuracy requirements is derived on the basis of a comparison of the Kalman filter innovation series and the platform dynamics. An innovative time synchronization solution using a counter and two latching registers is proposed. The proposed solution has been implemented with off-the-shelf components and tested. The resolution and accuracy analysis shows that the proposed solution can achieve a time synchronization accuracy of 0.1 ms if INS can provide a hard-wired timing signal. A synchronization accuracy of 2 ms was achieved when the test system was used to synchronize a low-grade micro-electromechanical inertial measurement unit (IMU), which has only an RS-232 data output interface.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.462-471
• /
• 2008

Flight recoder is used to analyze the accident factors and prevent the accident. In the analysis of the flight recorder, the most important factor is how to estimate the precise location of the flight. Traditional aviation navigation is based on stable sensors such as DME and VOR. In order to enhance the precision of the location estimation, the integrated navigation algorithm is designed to incorporate DME, Air data sensors and INS(Inertial Navigation System). The results demonstrate that the proposed algorithm can achieve better accuracy, comparing with the traditional navigation schemes, in flight location estimation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.80-80
• /
• 2000

The GPS can provide accurate position information on the earth. But GPS receiver can't give position information inside buildings. DR(Dead-Reckoning) or INS(Inertial Navigation System) gives position information continuously indoors as well as outdoors, because they do not depend on the external navigation information. But in general, the inertial sensors severely suffer from their drift errors, the error of these navigation system increases with time. GPS and DR sensors can be integrated together with Kalman filter to overcome these problems. In this paper, we developed a personal navigation system which can be carried by person, using GPS and electronic pedometer. The person's footstep is detected by an accelerometer installed in vertical direction and the direction of movement is sensed by gyroscope and magnetic compass. In this case the step size is varying with person and changing with circumstance, so determining step size is the problem. In order to calculate the step size of detected footstep, the neural network method is used. The teaming pattern of the neural network is determined by human walking pattern data provided by 3-axis accelerometer and gyroscope. We can calculate person's location with displacement and heading from this information. And this neural network method that calculates step size gives more improved position information better than fixed step size.